Author Index

A

  • Ahmadi Balootaki, Mohammd Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Ahmadpour, M. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Alian Moghadam, Hossein Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Altan, Mirigül Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]
  • Amiri, Alireza Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Arghavan, Alireza The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]
  • Asgarikia, Mehdi Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Assareh, Ehsanolah Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Azarafza, Reza Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Azizi, Abdolhamid Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]

B

  • Babaiyan, Vahide Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Bahrambeigi, Mohammad Reza A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Bahrami, Pooya Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]
  • Bakhshi-Jooybari, mohamad Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Bayareh, Morteza Evaluation of ANN and ANFIS Methods in Study of the Motion of a Bubble in A Combined Couette-Poiseuille Flow [Volume 14, Issue 1, 2021, Pages 33-42]
  • Bayati Chaleshtori, Behzad Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Boomeri, vahid Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm [Volume 14, Issue 1, 2021, Pages 1-17]
  • Bozorgan, Navid Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]

D

  • Daneshmand, Saeed Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Dehghani, Maryam Design and Analysis of Bicycle Helmet Made of PETg and ABS with Honeycomb Structure Against External Impacts using Abaqus Software [Volume 14, Issue 1, 2021, Pages 83-90]

E

  • Ebrahimi, Jamshid Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Eivazi bagheri, Hadi Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Eryildiz, Meltem Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]
  • Eskandari Jam, Jafar Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Eskandari Shahraki, Majid Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]

F

  • Farahat, Said Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Foorginejad, Abolfazl Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]

G

  • Ghafouri, Ashkan Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Ghahramani, Zahra Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Ghiasvand, Amir The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Ghoddosian, Ali The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]
  • Ghorbanhosseini, Sadegh A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Golmakani, M.E. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Gorji, Hamid Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]

H

  • Hadipour, Mojtaba Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]
  • Hajiahmad, Ali Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Hashemi, Seyed Jalal Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process [Volume 14, Issue 1, 2021, Pages 43-49]
  • Heydari, Vahid Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Heydari Beni, Mohsen Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Heydari Beni, Mohsen Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Hosseinzadeh, Ali Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]

I

  • Izgi, Batuhan Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]

J

  • Jamshidi, Ehsan The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]

K

  • Kakavand, Farshad Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Kargar Razi, Maryam Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Kazemi, Mohammad Hosein Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Kazemian, Amir Hossein Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Kheradmandan, Hasan The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Khoshanjam, Ali Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]
  • Khosravi, Arezoo Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]

M

  • Mahdipour Jalilian, Maziar The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Mahjoub Moghadas, Saied Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]
  • Mahmoodabadi, Mohammadjavad An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Mazinan, Amir Hooshang Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Moarefzadeh, Ali Removing Residual Stress and Increasing Fatigue Life by Ultrasonic Method [Volume 14, Issue 3, 2021, Pages 35-43]
  • Mohtasebi, Seyed Saeid Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Mollayi, Nader Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Moradi, Mojtaba Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]

N

  • Naderi, Mahmood Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel [Volume 14, Issue 2, 2021, Pages 37-48]
  • Nadri, Hamidreza Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Najafi, Mohammad Reza Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]
  • Nourbakhsh, Amireh Evaluation of ANN and ANFIS Methods in Study of the Motion of a Bubble in A Combined Couette-Poiseuille Flow [Volume 14, Issue 1, 2021, Pages 33-42]

O

  • Orak, Mohammad Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]

P

  • Pak, Abbas Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Parsa, Hossein Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Pazooki, Farshad Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Pezhman, Alireza An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Pourfarzaneh, Hossein Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]

R

  • Rahimi, Monavvar Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Rahmani, Hossein Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Rahmani, Mohsen Experimental and Numerical Study of Lateral Loadings on the Composite Tubes with SMA and Aluminum Wires and Without Wire [Volume 14, Issue 2, 2021, Pages 15-22]
  • Rajabi, Parham Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Rasouli Jazi, Saeid Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Rezapour, Javad An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Roohi, Amir H. Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process [Volume 14, Issue 1, 2021, Pages 43-49]

S

  • Saberi Varzaneh, Ali Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel [Volume 14, Issue 2, 2021, Pages 37-48]
  • Sadeghi, Babak Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Sadidi, Mohsen Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]
  • Sadraee Far, M.N. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Safieddin Ardebili, Seyed Mohammad Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Sajed, Moosa Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]
  • Salehi, Mehdi Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Sarhaddi, Faramarz Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Seidi, Hasan Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Seyedkashi, S. M. Hossein Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]
  • Seyyedbarzani, Seyyed Amin Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Shaban, Mahdi Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Shabgard, Mohammad Reza Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Shahabi, Ali Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]

T

  • Taheri, Morteza Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Tarighi, Reza Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Tourajizadeh, Hami Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm [Volume 14, Issue 1, 2021, Pages 1-17]

Y

  • Yaghoubi, Saeed A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Yavari Nouri, Masoud Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]

Z

  • Zamani, Mohammad Reza Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Zareh, Masoud Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Zaretabar, Mohsen Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]