Author Index

A

  • Abram, Tom N Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Adnani Salehi, Seyed Adnan Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]
  • Aghajani, Hamed Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]
  • Akbari, Mahmuod Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Akbari Alashti, Reza Vibration Analysis of Laminated Composite Plates Carrying Rotating Circular Mass [Volume 7, Issue 3, 2014]
  • Akhondzadeh, Mohammad Simulation of Air Pad Shape on Pressure Distribution in Air Gap of Air Table in Ultra Precision Machine Tools [Volume 7, Issue 1, 2014]
  • Alibakhshi, Reza Trajectory Optimization of Spherical Parallel Robots Using Artificial Neural Network [Volume 7, Issue 1, 2014]
  • Alibakhshi, Reza Vibration Analysis of Laminated Composite Plates Carrying Rotating Circular Mass [Volume 7, Issue 3, 2014]
  • Arab, Najmeddin Analytical and Experimental Analysis of Axisymmetric Deep Drawing Process [Volume 7, Issue 2, 2014]
  • Asadi, Esmail Analytical and Numerical Buckling Analysis of Carbon Nanotube Reinforced Annular Composite Plates [Volume 7, Issue 2, 2014]
  • Ashna, Mostafa Numerical investigation of Electrohydrodynamic effect on Lift and Drag Forces on an airfoil in low Reynolds air flow [Volume 7, Issue 4, 2014]
  • Ashrafi, Nariman Heat transfer of Nano-fluids as working fluids of swimming pool heat exchangers [Volume 7, Issue 1, 2014]
  • Azimifar, Farhad Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]

B

  • Bahrani, S. A. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]
  • Barzanooni, Vahid Experimental Investigation of Turbulence Promoters effect on Characteristics of Wake related to Linear Compressor Cascade [Volume 7, Issue 2, 2014]
  • Bashirzadeh, Yashar Heat transfer of Nano-fluids as working fluids of swimming pool heat exchangers [Volume 7, Issue 1, 2014]
  • Belhocine, Ali Finite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact [Volume 7, Issue 4, 2014]
  • Bennett, Graham R Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]

C

  • Chamoret, D. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]

D

  • Davari, Ali Reza VISCOUS DRAG REDUCTION ON AXISYMMETRIC BODIES USING HELICAL RIBLETS [Volume 7, Issue 4, 2014]
  • Djavanroodi, Faramarz Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]

E

  • Ebrahimi, Saeed Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Elhami, Mohammad Reza Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Elyasi, Majid Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]
  • Esmaili, Qadir A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]

F

  • Farahmandian, Mahdi Theoretical and Experimental Study on Vibration of Cracked Shafts Using Order Analysis [Volume 7, Issue 2, 2014]
  • Fatouraee, Nasser Design and Development of Limits of Stability and Postural Stability Protocols for a Computerized Dynamic Posturography [Volume 7, Issue 2, 2014]
  • Fazeli, Mohammad Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]

G

  • Galloway, Greg Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Ghadami, Farid Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts [Volume 7, Issue 1, 2014]
  • Ghaitani, Mohammad Mehdi Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Ghasemi, Abbas Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Ghassemi, Aazam Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Ghorbani, M. T. Path Following of a High Speed Planing Boat Based on Gauss Pseudospectral Method [Volume 7, Issue 1, 2014]
  • Ghorbanpour Arani, Ali Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Golbakhshi, Hossein Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]

H

  • Habibalahi, Abbas Application of Pulsed eddy current technique to stress and residual stress measurement [Volume 7, Issue 1, 2014]
  • Habibnejad Korayem, A. Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Habibnejad Korayem, Moharam Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Habibnejad Korayem, Moharam Frequency Response of AFM Nano Robot in Liquid by considering the effect of Cantilever's dimension and Environmental Parameters [Volume 7, Issue 4, 2014]
  • Hajizadeh, Iman Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Heidari, Mohammad Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Homaei, Hadi Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Homayon Sadeghi, Morteza Theoretical and Experimental Study on Vibration of Cracked Shafts Using Order Analysis [Volume 7, Issue 2, 2014]
  • Hoseinzadeh, Morteza Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]

I

  • Imani, Misagh Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]

J

  • Jabbari, A. H. Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]
  • Jagtap, Ketan Experimental Investigation on the Influence of Cutting Parameters on Surface Quality obtained in SPDT of PMMA [Volume 7, Issue 2, 2014]
  • Jalili, Mohammad Mahdi Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]
  • Jam, J. E. Analytical and Numerical Buckling Analysis of Carbon Nanotube Reinforced Annular Composite Plates [Volume 7, Issue 2, 2014]
  • Janbakhsh, Milad Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]

K

  • Karami Fath, Iman Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Katiraei, Shahin Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Kazemi, Reza Optimal control with adaptive weighting coefficients for integrated vehicle dynamics control [Volume 7, Issue 1, 2014]
  • Kazemi, Reza Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]
  • Khademizadeh, Hasan Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Khalili, S.M.R. Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Khalkhali, Abolfazl Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Khalkhali, Abolfazl Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Khan, Zahid A. Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Kheirollahi, Hossein Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Kolahdoozan, Mojtaba Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]

L

  • Loghmanian, S. M. R. Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]

M

  • Manouchehrifard, Afshin The effect of carbon nanotubes on buckling analysis of embedded oil pipes resting on elastic medium [Volume 7, Issue 2, 2014]
  • Miandoabchi, Elyar Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Moazemi goudarzi, Ali Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Mohammadi, Meisam Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]
  • Moradi-Dastjerdi, Rasool Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Mozafary, Vajiha Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]

N

  • Naddaf Oskouei, Alireza Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Naderpour, Payman Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Namjoo, Moslem Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]
  • Nelson, Jack A Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Noorian, M. T. Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]

P

  • Padayodi, E. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]
  • Payvandy, Pedram Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Payvandy, Pedram Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]

R

  • Raf'at, Mohsen Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]
  • Rafee Nekoo, Saeed Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Rahimipour, Hassan The effect of carbon nanotubes on buckling analysis of embedded oil pipes resting on elastic medium [Volume 7, Issue 2, 2014]
  • Rahmati, sadegh Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts [Volume 7, Issue 1, 2014]
  • Rajabi, Iraj Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Rashidian, R. Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]
  • Rennie, Allan E W Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Rismani Yazdi, Saeed Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]

S

  • Sadrnezhaad, Seyed Khatiboleslam Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Safarpour Erfani, Pedram Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Safizadeh, M. S. Application of Pulsed eddy current technique to stress and residual stress measurement [Volume 7, Issue 1, 2014]
  • SAINI, VINOD KUMAR Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Sami, Saeed Frequency Response of AFM Nano Robot in Liquid by considering the effect of Cantilever's dimension and Environmental Parameters [Volume 7, Issue 4, 2014]
  • Sedighi, Mohammad Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]
  • Shafaghat, Ruzbeh A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]
  • Shamsolhoseinian, H. R. Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Shariyat, M. Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Sheikhi, M. M. Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Sheth, Anant Jitendrakumar Design and performance evaluation of Tuned Vibration Absorber for the vibration control of a centrifugal pump [Volume 7, Issue 1, 2014]
  • Shojaeefard, Mohammad Hasan Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Shojaeefard, Mohammad Hasan Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Siddiquee, Arshad Noor Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Solhjoei, Nosratollah Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Subramanian, Karthikeyan Design Enhancement of EGR System for Improved Vibration Performance on Truck Diesel Engine [Volume 7, Issue 1, 2014]

T

  • Tabatabaei Oreh, S. Hamed Optimal control with adaptive weighting coefficients for integrated vehicle dynamics control [Volume 7, Issue 1, 2014]
  • Towsyfyan, Hossein Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]

V

  • Vahdati, Mehrdad Simulation of Air Pad Shape on Pressure Distribution in Air Gap of Air Table in Ultra Precision Machine Tools [Volume 7, Issue 1, 2014]
  • Vahidi, Mohsen Experimental Investigation of Turbulence Promoters effect on Characteristics of Wake related to Linear Compressor Cascade [Volume 7, Issue 2, 2014]

X

  • Xu, Y.J. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]

Y

  • Yazdani, Azadi Design and Development of Limits of Stability and Postural Stability Protocols for a Computerized Dynamic Posturography [Volume 7, Issue 2, 2014]

Z

  • Zanousi, Sina A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]
  • Zolghadr, Hadi Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]