Author Index

A

  • Abdi Behnagh, Reza Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Abdollahi, Hadi An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Adami, Mahmood The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Adeleye, A. Olurotimi Picard Iteration Method to Kinetic Analysis of Thermal Inactivation of Enzyme as Applied in Biotechnology [Volume 11, Issue 4, 2018, Pages 53-59]
  • Afsharjahanshahi, Puya Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Aghanajafi, Cyrus Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]
  • Agha Seyed Mirzabozorg, Mohsen The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Ahmadi, Babak Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [Volume 11, Issue 4, 2018, Pages 31-46]
  • Ahmadi-Brooghani, Seyed Yousef Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Ahmadi Nadooshan, Afshin Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Alipour, Roozbeh Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Amini, Saeed Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Aminian, Ehsan Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [Volume 11, Issue 4, 2018, Pages 31-46]
  • Aminzadeh, Nasrin Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]
  • Amiri, M. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Ansari, Mohammad Ali Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Asghari, Mansour The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Ashrafi Tafreshi, ŮŽAmin Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods [Volume 11, Issue 4, 2018, Pages 99-106]
  • Atashafrooz, Meysam Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]
  • Atrian, A. Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique [Volume 11, Issue 1, 2018, Pages 33-41]
  • Azizzadeh, Turaj Combining Magnetic Flux Leakage and Optical Inspection Technique for Identification of Nearby Pittings [Volume 11, Issue 4, 2018, Pages 73-80]

B

  • Bahonar, Majid Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Bamdad, Mahdi The Effects of Joint Clearance on the Dynamics of the 3-RPR Planar Parallel Manipulator [Volume 11, Issue 2, 2018, Pages 120-113]
  • Baraheni, Mohammad Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Bayareh, Morteza Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Betkhoodu, Annette Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections [Volume 11, Issue 2, 2018, Pages 15-25]
  • Boroomand, Farzad Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method [Volume 11, Issue 2, 2018, Pages 95-101]

C

  • Chockalingam, K. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]

D

  • Davoodi, Behnam Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]

E

  • Ebrahimi, Saeed Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]
  • Ebrahimzadeh, Mahdi Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies [Volume 11, Issue 2, 2018, Pages 1-13]
  • Etemadi Haghighi, Shahram Dynamic Modelling and Control of a Dielectric Elastomer Actuator with Two Degrees of Freedom [Volume 11, Issue 3, 2018, Pages 93-99]
  • Ettefagh, Mir Mohammad Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]

F

  • Fadaei, Abbas Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections [Volume 11, Issue 2, 2018, Pages 15-25]
  • Fallah, M.M. Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation [Volume 11, Issue 1, 2018, Pages 43-50]
  • Farahani, M. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Farahnakian, Masoud Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Fardaghaie, Ata Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness) [Volume 11, Issue 2, 2018, Pages 131-139]
  • Farhangdoost, Khalil Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Farokhi Nejad, Ali Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Foorginejad, Abolfazl Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]

G

  • Galehdari, Ali Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies [Volume 11, Issue 2, 2018, Pages 1-13]
  • Ghaderi, Reza Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Ghadimi, Morteza Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]
  • Ghadiri, Younes Experimental Investigation of Maximum Achievable Convolution Height of Metallic Bellows in Hydroforming Process [Volume 11, Issue 2, 2018, Pages 69-74]
  • Gharavi, Farhad Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints [Volume 11, Issue 1, 2018, Pages 87-94]
  • Gharib, Morteza Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Ghasemi, Amir Hossein Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Ghazanfari, Valiyolah Thermal-hydraulic Analysis of Helical Coil Steam Generator of The Multi-Application Small Light Water Reactor (MASLWR) Test Loop Using Drift Flux Model [Volume 11, Issue 3, 2018, Pages 83-91]
  • Golbakhshi, Hossein Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]

H

  • Habibnejad, Moharam Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Habibnejad Korayem, Amin Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Haghani, Ahmad Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Hashemzadeh, Majid The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Hesari, Yaser Dynamic Modelling and Control of a Dielectric Elastomer Actuator with Two Degrees of Freedom [Volume 11, Issue 3, 2018, Pages 93-99]
  • Homayoun Sadeghi, Morteza Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • Hoseinzadeh, Maryam Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Hosseini Harat, Seyyed Mohammad Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]

J

  • Jafarian, Mojtaba Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Jahanfarnia, Gholamreza Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Jahangiri, Mehdi Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Jalali Azizpour, Mehdi Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness) [Volume 11, Issue 2, 2018, Pages 131-139]
  • Jamadi, Farnaz Forecasting Operational Parameters of a Solar Space Heating System using a Novel Multistage Artificial Neural Network [Volume 11, Issue 2, 2018, Pages 75-84]
  • Jamali, Behnam Forecasting Operational Parameters of a Solar Space Heating System using a Novel Multistage Artificial Neural Network [Volume 11, Issue 2, 2018, Pages 75-84]
  • Jawahar, N. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]

K

  • Karimi, Mohammad Ali Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Karthic, M. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]
  • Kazeminia, Sarang Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Khakpash, Mohammad Saeed Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Khalkhali, A. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Khorram, Ali An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Khoshnam, Farhad Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Kolasangiani, Kamal Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]

L

  • Liaghat, Gh. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Lin, Dong Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Lotfi, Amir Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]

M

  • Mahboubkhah, Mehran Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • Mahmoodabadi, Mohammadjavad Pareto Optimum Design of Heat Exchangers based on the Imperialist Competitive Algorithm: A Case Study [Volume 11, Issue 3, 2018, Pages 75-82]
  • Mahmoudpour, Ebrahim Nonlinear Vibration Analysis of FG Nano-Beams in Thermal Environment and Resting on Nonlinear Foundation based on Nonlocal and Strain-Inertia Gradient Theory [Volume 11, Issue 3, 2018, Pages 11-24]
  • Mankanteswar Rao, Chinthada Analysis of Stresses in Tapered Rectangular Utility Pole [Volume 11, Issue 1, 2018, Pages 15-25]
  • Moayyedi, Mohammad Kazem A Surrogate Reduced Order Free Vibration Model of Linear and Non-Linear Beams using Modified Modal Coefficients and HOSVD Approaches [Volume 11, Issue 4, 2018, Pages 61-71]
  • Mohajerzadeh, Saenoddin Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Molla Ramezani, Navid Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]
  • Mollayi, Nader Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]
  • Moradi, Mahmoud An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Morovat, Foozie Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]
  • Mozaffari, Ali Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]

N

  • Namjoo, Moslem Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Nazari, Farshad Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Nazari, Mohamad Reza Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Niknam, Seyed Ali Simultaneous use of Acoustic Emission Signals and Statistical Analysis to Distinguish between Lubrication Modes in Rolling Element Bearings [Volume 11, Issue 4, 2018, Pages 81-90]
  • Nikoobin, Amin Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Nilsaz Dezfouli, Hamid Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Niroomand, Mohammad Reza Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method [Volume 11, Issue 2, 2018, Pages 95-101]
  • Niyavarani, Ensieh Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Nourbakhsh, S. H. Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique [Volume 11, Issue 1, 2018, Pages 33-41]
  • Nouri, Saeed Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]

P

  • Paidar, Moslem Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Pakzad, Sajjad Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • Prasad, Kondapalli Siva Analysis of Stresses in Tapered Rectangular Utility Pole [Volume 11, Issue 1, 2018, Pages 15-25]

R

  • Rafee Nekoo, Saeed Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Raghebi, Mehdi Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Rezaee Hajideh, Mojtaba Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]
  • Roshanian, Jafar Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]

S

  • Sadegh Amalnik, Morteza Expert System Approach for Optimization of Design and Manufacturing Process for Rotary Ultrasonic Machining [Volume 11, Issue 1, 2018, Pages 1-13]
  • Safari, Mehdi Experimental Investigation of Maximum Achievable Convolution Height of Metallic Bellows in Hydroforming Process [Volume 11, Issue 2, 2018, Pages 69-74]
  • Safizadeh, Mir Saeed Combining Magnetic Flux Leakage and Optical Inspection Technique for Identification of Nearby Pittings [Volume 11, Issue 4, 2018, Pages 73-80]
  • Salahshoor, Esmaeil Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]
  • Salehi, Maral Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Salehi, Mohsen Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Saraeian, Payam Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Sebghatollahi, Farhad Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Shahab, Ebrahim Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Shahrajabian, Hamzeh Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Shahriari, Behrooz Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Sobamowo, M. Gbeminiyi Picard Iteration Method to Kinetic Analysis of Thermal Inactivation of Enzyme as Applied in Biotechnology [Volume 11, Issue 4, 2018, Pages 53-59]
  • Soleimani, Ahmad Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Soleimanzadeh, M. Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation [Volume 11, Issue 1, 2018, Pages 43-50]
  • Sotoodehnia, Shima Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]

T

  • Tabatabaee Ghomi, M. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Taheri, Hossein The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Taheri, Morteza Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]
  • Talebi, Mansour Thermal-hydraulic Analysis of Helical Coil Steam Generator of The Multi-Application Small Light Water Reactor (MASLWR) Test Loop Using Drift Flux Model [Volume 11, Issue 3, 2018, Pages 83-91]

V

  • Vakili, M. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Varedi-Koulaei, Seyyed Mojtaba The Effects of Joint Clearance on the Dynamics of the 3-RPR Planar Parallel Manipulator [Volume 11, Issue 2, 2018, Pages 120-113]

Z

  • Zaare, Hadi Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]
  • Zamani, Pedram Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Zarepour Firouzabadi, Hamid The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Zarnegar, Soodeh Pareto Optimum Design of Heat Exchangers based on the Imperialist Competitive Algorithm: A Case Study [Volume 11, Issue 3, 2018, Pages 75-82]
  • Zohoor, Mehdi Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods [Volume 11, Issue 4, 2018, Pages 99-106]