Volume 14 (2021)
Volume 13 (2020)
Volume 12 (2019)
Volume 11 (2018)
Volume 10 (2017)
Volume 9 (2016)
Volume 8 (2015)
Volume 7 (2014)
Volume 6 (2013)
Volume 5 (2011-2012)
Volume 4 (2010-2011)
Volume 3 (2009-2010)
Volume 2 (2008-2009)
Volume 1 (2007-2008)
Number of Volumes 15
Number of Issues 58
Number of Articles 615
Number of Contributors 1,234
Article View 138,786
PDF Download 126,488
View Per Article 225.67
PDF Download Per Article 205.67
Acceptance Rate 27
Time to Accept (Days) 146
Number of Indexing Databases 13
Number of Reviewers 1771

 

The aim of the Journal of Advanced Design and Manufacturing Technology (ADMT) is to provide an international forum for the publication and dissemination of original work that contributes to the understanding of the main and related disciplines of mechanical engineering, either empirical or theoretical. The Journal covers the whole spectrum of mechanical engineering, which includes design engineering, production engineering, advanced manufacturing technology, manufacturing planning, optimization and simulation,  artificial intelligence, traditional and nontraditional manufacturing, flexible manufacturing systems, computer integrated manufacturing, dynamics, vibration and control, micro and nano mechanics, robotics, stress analysis, composite materials, metal forming, meso/micro/nano fabrication, welding, joining and assembly at micro and macro scales, smart manufacturing, rapid prototyping, rapid manufacturing, additive manufacturing, aerospace, and any related special topics.

 All submitted manuscripts are checked for similarity through a trustworthy software named iThenticate to be assured about its originality and then rigorously peer-reviewed by the international reviewers.

ADMT is licensed under the terms of the Creative Commons Attribution License 4.0 International (CC- By 4.0). 

Indexing / Abstracting

Journal of Advanced Design and Manufacturing Technology (ADMT) is indexed in ProQuest, Ebsco, ISC, COPERNICUS, Google Scholar, J-gate, Summon, SID, Getcited, Romeo, EZB(Electronic Journal Library), Drji, Researchbib, Open Access Digital Library and Genamics JournalSeek.

 
1. Numerical and Experimental Static Bending Analysis of Composite Sandwich Panels with Grid-Stiffened Cores Before and After Transverse Impact Loading

Ali Asghar Davoodabadi; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari Jam

Volume 15, Issue 1 , March 2022, Pages 1-9

http://dx.doi.org/10.30495/admt.2021.1904974.1208

Abstract
  Nowadays grid structures are considered as one of the most useful composites because of their various applications. Since grid structures are vulnerable to impact loads, they should be investigated under such loadings. The present paper studies the low-velocity impact loading of sandwich panels with ...  Read More

2. Micro Electropolishing of the MEMS Metallic Structures Fabricated by the Micro WEDM Process

Mohammad Tahmasebipour; Younes Tahmasebipour; Mahya Boujari Aliabadi; Shadi Ebrahimi

Volume 15, Issue 1 , March 2022, Pages 11-19

http://dx.doi.org/10.30495/admt.2022.1928592.1277

Abstract
  In this study, the micro electro-polishing method was employed to improve the surface quality of microbeams machined by the micro WEDM method and to remove the recast layer. This approach changes the dimensions of the microbeams, as a result of the electrochemical corrosion, in addition to the elimination ...  Read More

3. Bending and Vibration Analysis of a Mindlin Rectangular Nanoplate using Modified Couple Stress Theory and Navier's Solution

Majid Eskandari Shahraki; Mahmoud Shariati; naser asiaban

Volume 15, Issue 1 , March 2022, Pages 21-28

http://dx.doi.org/10.30495/admt.2021.1923209.1252

Abstract
  In this paper, a Mindlin rectangular nanoplate model is developed for the bending and vibration analysis of a graphene nanoplate based on a modified couple stress theory. In order to consider the small scale effects, the modified couple stress theory, with one length scale parameter, is used. In modified ...  Read More

4. The Application of the Extended Isogeometric Analysis (XIGA) with K-Refinement Approach for the Prediction of Fatigue Life in Linear Elastic Fracture Mechanic

Ata Fardaghaie; Shahram Shahrooi; Mohammad Shishehsaz

Volume 15, Issue 1 , March 2022, Pages 29-50

http://dx.doi.org/10.30495/admt.2021.1927025.1271

Abstract
  This study investigates the fatigue life of a cracked plate subjected to cyclic load under linear elastic fracture mechanics, using a numerical method of extended isogeometric analysis (XIGA) with a K-refinement approach. XIGA is applied to simulate discontinuity problems without meshing and without ...  Read More

5. Modeling and Simulation of 6DOF Robot Manipulators with Tactile Position-Force Control

Mohammad Reza Najafi; Ahmad Reza Khoogar; Hadi Darabi

Volume 15, Issue 1 , March 2022, Pages 51-63

http://dx.doi.org/10.30495/admt.2021.1918232.1235

Abstract
  In this paper, a joint position-force controller is used to control a 6R general-purpose robot manipulator. The manipulator comes into interaction with a spherical object in a numerically simulated environment. A controller has been implemented using the MATLAB Simulink software which uses the Simmechanics ...  Read More

6. Characterization of DLC Thin Films Deposited by DC-Pulsed PACVD using Methane Precursor

seyed mohammad mahdi shafiei; Hamed raeiesifard

Volume 15, Issue 1 , March 2022, Pages 65-71

http://dx.doi.org/10.30495/admt.2022.1926795.1270

Abstract
  In this work, Diamond Like Carbon (DLC) thin films were deposited on aluminum alloy 6061 by Plasma-Assisted Chemical Vapor Deposition (PACVD). Nitiding prior to coated leads to appropriate hardness gradient and it can greatly improve the mechanical properties of the coatings. The composition, crystalline ...  Read More

7. Modelling and Control of Mutation Dynamics of the Cancer Cells Employing Chemotherapy

Hami Tourajizadeh; zahra goorkani zarandi; zakie farbodi; ehsan sadeghi

Volume 15, Issue 1 , March 2022, Pages 73-83

http://dx.doi.org/10.30495/admt.2021.1920220.1240

Abstract
  In this paper, the analytic model of the mutation dynamics related to the cancer cells which is under the control of chemotherapy is developed and its corresponding metastasis is controlled using chemotherapy method.  The progress of a cancer tumours is contributed to two main factors including ...  Read More

8. Effect of CaCO3 Nanoparticles on Vibrational Damping Behavior and Static Mechanical Properties of Polypropylene Composite Plates: An Experimental Investigation

Mahdi Rahmani; Armen Adamian; Ahmad Hosseini-Sianaki

Volume 15, Issue 1 , March 2022, Pages 85-94

http://dx.doi.org/10.30495/admt.2022.1933897.1292

Abstract
  In this research, the effect of CaCO3 nanoparticles was experimentally investigated on vibrational damping behavior and static mechanical properties of polypropylene (PP). Hammer tests along with modal analysis were carried out to evaluate the forced vibration behavior of composite plates under  one ...  Read More

9. Evaluating the Effect of the Second Invariant of Deformation Tensor in The Axial and Azimuthal Shear Deformations

Amir Ghafouri Sayyad; Ali Imam; Shahram Etemadi Haghighi

Volume 15, Issue 1 , March 2022, Pages 95-107

http://dx.doi.org/10.30495/admt.2021.1928399.1275

Abstract
  The purpose of the present paper is to investigate the effect of the second invariant of the deformation tensor on the axial and azimuthal shear deformation of an incompressible hyperelastic solid with various strain energy functions. To this end, the axial shear deformation of an incompressible cylinder ...  Read More

10. Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint

Asghar Mahdian; Arash Babamiri; Behrooz Shahriari

Volume 15, Issue 1 , March 2022, Pages 109-114

http://dx.doi.org/10.30495/admt.2022.1934601.1296

Abstract
  Welding is known as one of the most popular attaching methods for different hollow section components. However, local concentrated heating, distortion, and residual stresses at welded joints are unavoidable. In this article, the welding simulation for rectangular hollow (RHS) sections for the front axle ...  Read More

11. Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft

saeid Hashemian; Peyman Mashhadi Keshtiban; Abuzar Es'haghi Oskui

Volume 15, Issue 1 , March 2022, Pages 115-124

http://dx.doi.org/10.30495/admt.2022.1933346.1290

Abstract
  The present study investigates the production process by closed die forging method of one of the sensitive and safe parts of KIA car brake, which is affected by various mechanical and thermal stresses in its operating conditions; therefore, in the present research, the application of this forming method ...  Read More

12. Optimization of Location and Stiffness of an Intermediate Support to Maximize the First Natural Frequency of a Beam with Tip Mass-With Application

Hossein Ebrahimi; Farshad Kakavand; Hassan Seidi

Volume 15, Issue 1 , March 2022, Pages 125-132

http://dx.doi.org/10.30495/admt.2022.1933790.1291

Abstract
  The optimal position and minimum stiffness of an intermediate support is implemented to maximize the fundamental natural frequency of a vibrating cantilever Euler-Bernoulli beam with tip mass. According to Courant’s maximum-minimum theorem, maximum value of the first natural frequency of a beam ...  Read More

13. Dimensional and Geometrical Tolerance Analysis of Two Flexible Curved Sheet Metal Parts Assembly

Parisa Omidvar; Maryam Gh. Saryazdi

Volume 15, Issue 1 , March 2022, Pages 133-142

http://dx.doi.org/10.30495/admt.2022.1934277.1295

Abstract
  Sheet metal assemblies are widely used in the automobile, aerospace, and shipbuilding industries. Sheet metals deform during the manufacturing and assembly process due to their high flexibility. Traditional tolerance analysis approaches were developed for rigid assemblies; however, new approaches of ...  Read More

1. The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures

Alireza Arghavan; Ali Ghoddosian; Ehsan Jamshidi

Volume 14, Issue 2 , June 2021, , Pages 1-14

http://dx.doi.org/10.30495/admt.2021.1921979.1248

Abstract
  The Non-destructive vibration based structural damage detection techniques have been developed in the recent decades. They are usually converted into a mathematical optimization problem that should be solved using optimization algorithms. In this paper, a new hybrid algorithm, using a particle swarm ...  Read More

2. Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process

Masoud Yavari Nouri; S. M. Hossein Seyedkashi; Moosa Sajed

Volume 14, Issue 3 , September 2021, , Pages 1-7

http://dx.doi.org/10.30495/admt.2021.1911339.1220

Abstract
  In this paper, a new production method of aluminium/steel double-layered wire is proposed using a modified friction stir extrusion process. The core and coating were made of St37 steel and aluminium alloy, respectively. For extruded specimens, the effects of the main process parameters including tool ...  Read More

3. Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength

Majid Farhang; Mohammadreza Farahani; Moein Enami

Volume 14, Issue 4 , December 2021, , Pages 105-112

http://dx.doi.org/10.30495/admt.2021.1922979.1280

Abstract
  In this study, effects of process parameters of Friction Stir Spot Welding were investigated on Al2024T3 which has poor weldability. Several spot welds were performed by the FSSW process on the 2mm aluminium sheets. The effects of main process parameters such as tool Rotational Speed (RS), Normal Plunge ...  Read More

4. Design and Analysis of Metal-Composite Vessel under Internal Pressure

Ghasem - Amraee Rad; Gholamhossien Rahimi

Volume 14, Issue 4 , December 2021, , Pages 1-10

http://dx.doi.org/10.30495/admt.2021.1918180.1234

Abstract
  This paper, firstly, investigates the behavior of a pressure vessel designed based on the netting analysis method. Then, the strain measurement result performed to examine the behavior of the vessel is presented. It has been observed that the reverse strain is occurred at the joint of the vessel cylindrical ...  Read More

5. Experimental and Numerical Study of Lateral Loadings on the Composite Tubes with SMA and Aluminum Wires and Without Wire

sajjad dehghanpour; Mohsen Rahmani

Volume 14, Issue 2 , June 2021, , Pages 15-22

http://dx.doi.org/10.30495/admt.2021.1921230.1244

Abstract
  In this paper, crushing length, deformations and energy absorption of thin walled square and rectangular composite tubes which are reinforced with Aluminium and SMA wires and without wire have been investigated under a quasi-static lateral load, both experimentally and numerically. To experimental study, ...  Read More

1. Analysis of time–varying mesh stiffness for the planetary gear system with analytical and finite element methods

Ali Shahabi; Amir Hosein Kazemian

Articles in Press, Accepted Manuscript, Available Online from 22 December 2021

http://dx.doi.org/10.30495/admt.2021.1906469.1210

Abstract
  In dynamic model of planetary gears, one of the key design parameters and one of the main sources of vibration is time–varying mesh stiffness of meshing gears. According to previous researches, the finite element method and analytical method are two techniques to estimate the mesh stiffness of ...  Read More

2. Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods

Hadi Salimi; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari Jam; Majid Eskandari Shahraki

Articles in Press, Accepted Manuscript, Available Online from 22 December 2021

http://dx.doi.org/10.30495/admt.2021.1908459.1215

Abstract
  In this paper, free vibration of laminated composite cylindrical shells reinforced with circumferential rings, are investigated with experimental, analytical and finite element methods and natural frequencies are obtained. The analysis is carried out for clamp-free and clamp-clamp boundary conditions ...  Read More

3. Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load

Mahdi Farhadi; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari Jam

Articles in Press, Accepted Manuscript, Available Online from 22 December 2021

http://dx.doi.org/10.30495/admt.2021.1908801.1217

Abstract
  Thanks to their high strength-to-weight ratio, lightweightness, and excellent energy absorption, composite lattice panels can be used in the aerospace, marine, automotive, and other industries. These structures can be used as an alternative to string-reinforced structures, honeycomb (core) sandwich panels, ...  Read More

4. Dynamic response of FGM plates under blast load

reza azarafza; puya pirali; Ali Davar; majid ghadimi

Articles in Press, Accepted Manuscript, Available Online from 22 December 2021

http://dx.doi.org/10.30495/admt.2021.1920150.1239

Abstract
  The present study investigates the deformation of FGM plates under blast load. Hamilton's principle is used to obtain the dynamic equations. The two constituent phases, ceramic and metal, vary across the wall thickness according to a prescribed power law. Boundary conditions are assumed to be simply ...  Read More

5. Mechanical properties of materially and geometrically gradient cellular structures manufactured with SLS 3d printer applicable as a bone implant

Ali Salehi; Alireza Daneshmehr; Kiyarash Aminfar

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1930119.1283

Abstract
  Cellular structures are broadly used because of their exclusive properties in tissue engineering. This research proposes a new method, both in design and manufacturing, to engineer their mechanical properties considering gradient material and geometrical features and evaluate the possibility of using ...  Read More

6. Leaching of metals from dental silveralloy wastes

Razieh Khoshhal; Hojjat Mirzaei-Ghasabeh; Mohammad Asadrokht; Ali Hosseinzadeh

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1934796.1297

Abstract
  Environmental issues of hazardous metal wastes as well as growing demand for metals has increased focus on the forthcoming provision of metals. Therefore, the recovery and recycling processes of precious metals from secondary resources have become more prominent in the last years. Silver is one of the ...  Read More

7. Magnetic Field Effect on Ferro-Nanofluid Heat Transfer in a Shell and Tube Heat Exchanger with Seven Twisted Oval Tubes

Mansour Talebi; Mehran Tabibian

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1937049.1300

Abstract
  This article investigates the effect of magnetic field on the performance of a special shell-and-tube heat exchanger using ferro-nanofluid. The heat exchanger comprises seven twisted oval tubes with triangular array mounted on a hexagonal cross section. Water/iron oxide nanofluid with a volume ratio ...  Read More

8. Behaviour of Lightweight Smart Sandwich Panels Subjected to Tensile and Bending Loads- An Experimental Study

sameera Khalili; s. Mohammad Reza Khalili; Reza Eslami Farsani

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1937484.1302

Abstract
  In this research work, sandwich composite panels made by fiber metal laminate (FML) as the facesheets and polymer foams as the core material are investigated in tensile and bending loads. To change or enhance the behaviour of sandwich panels in tensile and bending loads, shape memory alloy wires with ...  Read More

9. Redesign and Accuracy Improvement of Disposable Infusion Pumps

sajjad pakzad; ahad shah hoseini; Hossein Rashid Myab; Amirhossein Vazirpanah

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1938173.1308

Abstract
  Nowadays, disposable injection pumps are widely used in hospitals and home care settings to provide various therapies such as chemotherapy, antimicrobial, analgesic, and anesthetic treatments, as well as for postoperative pain control and chronic pain control. Since the accuracy of the injection is very ...  Read More

10. Stability Enhancement of In-Wheel-Motor Drive Electric Vehicle Using Adaptive Sliding Mode Control

Majid Majidi; Aria noori Asiabar

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1938721.1311

Abstract
  A multi-layer controller of direct yaw moment for electric vehicles is developed in this study. In the upper layer, the yaw moment are obtained using Adaptive Sliding Mode Control (ASMC) with adaptation gain to track the desired vehicle yaw rate. The corrective yaw moments are applied by four in-wheel ...  Read More

11. Numerical study of the flow field and heat transfer of a non-Newtonian magnetic nanofluid in a vertical channel affected by a magnetic field

amireh nourbakhsh; amirreza sadeghi

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1939334.1312

Abstract
  The present paper examines thermal and hydrodynamic behavior of the incompressible laminar flow of a non-Newtonian magnetic nanofluid in a vertical rectangular channel numerically using two-phase mixture model, Carreau model, and finite volume method. The non-uniform transverse magnetic field is created ...  Read More

12. Investigation effect of adding a Styrene-butadiene rubber damper to a sled sample and extraction of its equivalent stiffness and damping

Mohammad Reza Najafi; Saied Mahjoub Moghadas

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1939798.1313

Abstract
  Protection of sled systems from destructive vibrations is inevitably under attraction due to the importance of sled testing in the aerospace industry. A pair of SBR dampers were used between the slipper and the sled body to reduce vertical vibrations, so a design of the sled model was studied. Both equivalent ...  Read More

13. FA-ABC: A novel combination of firefly optimization algorithm and artificial bee colony for mathematical test functions and real-world problems

Ali reza Shafiee sarvestany; Mohammadjavad Mahmoodabadi

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1940026.1314

Abstract
  In this research study, an attempt is made to present a new optimization scheme by combination of the firefly algorithm and artificial bee colony (FA-ABC) to solve mathematical test functions and real-world problems as best as possible. In this regard, the main operators of the two meta-heuristic algorithms ...  Read More

14. A New Visual Servoing method for grasping and assembling objects Using Stereo Image Based Feedback

mahmoud jeddi; ahmad reza khoogar

Articles in Press, Accepted Manuscript, Available Online from 15 March 2022

http://dx.doi.org/10.30495/admt.2022.1924605.1256

Abstract
  In this paper, an eye-in-hand stereo image-based visual serving controller for industrial 6 degrees of freedom manipulator robots is presented. The visual control algorithms mostly use the relationship between camera speed and changes in image features, to determine the end-effector movement path. One ...  Read More

15. Mass and Stiffness Matrices and Frequencies of Simple Beam Elements Based on Real Shape Functions

Pedram Abouzari; Karen Khanlari; Reza Esmaeilabadi

Articles in Press, Accepted Manuscript, Available Online from 05 May 2022

http://dx.doi.org/10.30495/admt.2022.1949656.1336

Abstract
  In this research we investigate and compare the natural frequency values of simple beams and their mass and stiffness matrices of the two methods; classic shape functions and real shape functions, which are achieved by solving the beam motion equation and applying boundary conditions. The frequency values ...  Read More

Keywords Cloud