Author Index

A

  • Abbasgholipour, M. Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [Volume 10, Issue 4, 2017, Pages 63-73]
  • AbbasiRad, Reza Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM [Volume 10, Issue 3, 2017, Pages 31-40]
  • Abdi Behnagh, Reza Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Abdi Behnagh, Reza Recycling of Magnesium Machining Chips via Shear Consolidation Processing [Volume 12, Issue 1, 2019, Pages 95-99]
  • Abdi Behnagh, Reza Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining [Volume 13, Issue 2, 2020, Pages 23-31]
  • Abdollah, Amir Culling Force Investigation in Turning Process via Ultrasonic Assisted Turning on Al7075 Workpiece [Volume 3, Issue 4, 2010]
  • Abdollahi, Hadi Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM [Volume 10, Issue 3, 2017, Pages 31-40]
  • Abdollahi, Hadi An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Abdollahi, Hadi Recycling of Magnesium Machining Chips via Shear Consolidation Processing [Volume 12, Issue 1, 2019, Pages 95-99]
  • Abdollahzadeh Bina, F. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Abdullah, Amir Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming [Volume 13, Issue 3, 2020, Pages 1-8]
  • Abedi, Afshin The Effect of Type and Location of a Phase Change Material (PCM) Layer in a Building Wall on Energy Consumption using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 33-46]
  • Abedini, Vahid Feature Recognition of Sheet Metal Components and Strip Layout Design in Bending Progressive Dies using Fuzzy Set Theory [Volume 2, Issue 3, 2009]
  • Abedinzadeh, Reza Study on the Wettability and Optical Properties of Polydimethylsiloxane-SiO2 Nano-composite Surfaces [Volume 13, Issue 4, 2020, Pages 21-29]
  • Aboutalebi, M. R. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Abram, Tom N Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Abrinia, Caren An Investigation in the Deformation Zone of the ECAE Process by the Upper Bound Theorem [Volume 2, Issue 3, 2009]
  • Abrinia, K. Microstructure and Mechanical Properties of AZ91 Magnesium Cup Processed by a Combined Backward Extrusion and Constrained Ironing Method [Volume 10, Issue 1, 2017, Pages 23-30]
  • Adami, Mahmood The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Adami, Mahmood Effect of Aerodynamic Blade Change of Two-Stage Axial Subsonic Turbine on Design Point [Volume 12, Issue 2, 2019, Pages 63-73]
  • Adamian, Arman Comparison of Neural Networks and Fuzzy System for Estimation of Heat Transfer Between Contacting Surfaces [Volume 12, Issue 2, 2019, Pages 91-101]
  • Adamian, Armen Studying the Effect of Different Vortex Generator Geometries and Arrangements on Heat Transfer Performance of Heat Sinks [Volume 13, Issue 3, 2020, Pages 21-31]
  • Adeleye, A. Olurotimi Picard Iteration Method to Kinetic Analysis of Thermal Inactivation of Enzyme as Applied in Biotechnology [Volume 11, Issue 4, 2018, Pages 53-59]
  • Adibnazari, S. Multi layered finite element analysis of graded coatings in frictional rolling contact [Volume 8, Issue 1, 2015, Pages 1-12]
  • Adibnazari, Saeed Analysis of Effective Factors on Rail Failure and Exerted Stress on Rail and Wheel [Volume 4, Issue 2, 2011]
  • Adib Nazari, Saeed The Effect of Operational Cutting Parameters in the Wire Electro Discharge Machining (WEDM) on Micro Hardness of Alloy Surface Layer [Volume 2, Issue 4, 2009]
  • Adnani Salehi, Seyed Adnan Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]
  • Afrasiab, Hamed Accuracy Improvement of Upper Bound Analysis of Bimetallic Rods Extrusion Using a New Velocity Field [Volume 9, Issue 4, 2016, Pages 99-107]
  • Afrasiab, M. Severe Plastic Deformation of Nanostructured Cu-30%Zn Tubes at Increased Temperatures [Volume 9, Issue 3, 2016, Pages 85-91]
  • Afsari, Ahmad Machining Parameters Optimization of Self – Rotating Turing Tools Via Taguchi Method [Volume 1, Issue 3, 2008]
  • Afshari, Davood Optimization of AZ61 Mg Alloy Resistance Spot Welding using Response Surface Method [Volume 12, Issue 3, 2019, Pages 35-41]
  • Afshari, Samira Design, Modeling and Adaptive Force Control of a New Mobile Manipulator with Backlash Disturbances [Volume 12, Issue 2, 2019, Pages 1-16]
  • Afsharjahanshahi, Puya Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Aghadavoudi, farshid Investigation of CNT Defects on Mechanical Behavior of Cross linked Epoxy based Nanocomposites by Molecular Dynamics [Volume 9, Issue 1, 2016]
  • Aghadavoudi, farshid Thermomechanical Properties of the Polymeric Nanocomposite Predicted by Molecular Dynamics [Volume 12, Issue 4, 2019, Pages 25-32]
  • Aghajani, Hamed Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]
  • Aghajani Derazkola, Hamed Study on heat generation and distribution during friction stir welding of AA1100 aluminum alloy [Volume 8, Issue 3, 2015]
  • Aghajani Derazkola, Hamed Effects of friction stir welding tool plunge depth on microstructure and texture evolution of AA1100 to A441 AISI joint [Volume 9, Issue 1, 2016]
  • Agha Mohammad Pour, Mohsen Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining [Volume 13, Issue 2, 2020, Pages 23-31]
  • Aghanajafi, Cirus Exergy Analysis for Heat Pipe over a Permeable Vertical Thin Cylinder In a Porous Medium [Volume 2, Issue 1, 2008]
  • Aghanajafi, Cirus Two-Phase Heat Transfer and Pressure Drop of Carbon Dioxide in Pipes [Volume 2, Issue 2, 2009]
  • Aghanajafi, Cirus Investigation of Effects of Stress Relieving Parameters on Reduction of Austenitic Spring Free Length During Periodic Loading [Volume 2, Issue 3, 2009]
  • Aghanajafi, Crus Laboratory Investigation of Austenitic Stress Relieved Spring [Volume 2, Issue 4, 2009]
  • Aghanajafi, Cyrus Study of Nucleation and Meta Stable Phenomena’s and Applications [Volume 1, Issue 1, 2007]
  • Aghanajafi, Cyrus The Effects of Local Variation in Thermal Conductivity on Heat Transfer of a Micropolar Fluid Flow Over a Porous Sheet [Volume 9, Issue 2, 2016, Pages 19-25]
  • Aghanajafi, Cyrus Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]
  • Aghanajafi, Cyrus Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method [Volume 14, Issue 4, 2021, Pages 19-25]
  • Agha Seyed Mirzabozorg, Mohsen The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Ahi, Majid Optimal Design of a Novel Two-Branch Spray Painting Robot for Prescribed Process Space [Volume 12, Issue 1, 2019, Pages 13-21]
  • Ahmadi, Babak Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [Volume 11, Issue 4, 2018, Pages 31-46]
  • Ahmadi, Ehsan Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Ahmadi, Mehdi Laboratory Investigation of Austenitic Stress Relieved Spring [Volume 2, Issue 4, 2009]
  • Ahmadi, Negar Study of Skin Friction in Channels by Lattice Boltzmann Method [Volume 6, Issue 3, 2013]
  • Ahmadian, Mohammad Taghi Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Ahmadi Balootaki, Mohammad Studying the Effect of Pulse Shape on Dynamic Stress Intensity Factor at the Finite Crack Tip using Displacement Fields [Volume 13, Issue 2, 2020, Pages 109-117]
  • Ahmadi Balootaki, Mohammad Design an Adaptive Sliding Mode Controller for a Class of Underactuated Systems [Volume 14, Issue 4, 2021, Pages 37-44]
  • Ahmadi Balootaki, Mohammd Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Ahmadi-Brooghani, Seyed Yousef Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Ahmadi Nadooshan, Afshin Numerical Simulation of Turbulent Nano-fluidFlow in a Circular Elbow [Volume 9, Issue 1, 2016]
  • Ahmadi Nadooshan, Afshin Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Ahmadi Nadooshan, Afshin The Effect of Type and Location of a Phase Change Material (PCM) Layer in a Building Wall on Energy Consumption using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 33-46]
  • Ahmadi Nadooshan, Afshin Effect of Injection Velocity on Heat Transfer of Water/Alumina Nano Fluid in A Rectangular Microchannel [Volume 13, Issue 2, 2020, Pages 41-49]
  • Ahmadi Nadooshan, Afshin Numerical Study on Forced Convection of Slip Flow in A Microchannel with Smooth and Sinusoidal Walls [Volume 14, Issue 4, 2021, Pages 59-71]
  • Ahmadi Najafabadi, Mehdi Investigation of Effects of Stress Relieving Parameters on Reduction of Austenitic Spring Free Length During Periodic Loading [Volume 2, Issue 3, 2009]
  • Ahmadi Najafabadi, Mehdi Finite Element Simulation of Plasma Arc Welding Process for Ferrite Stainless Steel [Volume 4, Issue 3, 2011]
  • Ahmadpour, M. The Impact of Die Corner Radius and Friction Coefficient on Bulge Forming of T-Shaped Copper Tubes using Finite-Element Method and Experimental Analysis [Volume 10, Issue 1, 2017, Pages 31-38]
  • Ahmadpour, M. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Akbari, Javad Ultrasonic Assisted Drilling of Bone [Volume 1, Issue 4, 2008]
  • Akbari, Javad Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements [Volume 13, Issue 4, 2020, Pages 39-47]
  • Akbari, Mahmuod Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Akbari, Mohammad Temperature Distribution Analysis in a Laser Heating With Different Values of Cross Section and Beam Intensities [Volume 1, Issue 2, 2008]
  • Akbari*, A. A. Attitude Control of Unmanned Aerial Vehicle Based on Sliding Mode Technique with Parameter Estimation [Volume 10, Issue 2, 2017, Pages 49-60]
  • Akbari Alashti, Reza Vibration Analysis of Laminated Composite Plates Carrying Rotating Circular Mass [Volume 7, Issue 3, 2014]
  • Akbarinia, Farzad The Case Examination of Detection of Structural Damages on a Plate using Wavelet Transform [Volume 13, Issue 2, 2020, Pages 91-97]
  • Akbari Roknabadi, Saeed Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites [Volume 5, Issue 4, 2012]
  • Akbarzadeh, Alireza Prismatic Series of Elastic Actuator: Modelling and Control by ICA and PSO-tuned Fractional Order PID [Volume 8, Issue 4, 2015]
  • Akhondzadeh, Mohammad Simulation of Air Gap Thickness on Air Spindle Vibrations in Ultra Precision Machine Tools [Volume 6, Issue 2, 2013]
  • Akhondzadeh, Mohammad Simulation of Air Pad Shape on Pressure Distribution in Air Gap of Air Table in Ultra Precision Machine Tools [Volume 7, Issue 1, 2014]
  • Alaee, Mohammad Hossein Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Alafzadeh, Mina Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM [Volume 5, Issue 2, 2012]
  • Alavi, Majid Numerical Analysis of Rectangular Isotropic and Orthotropic Thin Plates Based on the Radial Point Interpolation Method (RPIM) [Volume 3, Issue 3, 2010]
  • Alavi, Sayed Mahmoud AbolHasan Numerical Analyses of Steady Non-Newtonian Flow over Flat Plate on Intermediate Reynolds Numbers by Finite Volume Method [Volume 1, Issue 4, 2008]
  • AlaviFazel, seyed ali Development of A New Correlation for Estimating Pressure Gradient of Oil- Water Two Phase Flow in A Horizontal Pipe [Volume 14, Issue 4, 2021, Pages 51-58]
  • Aliabbasi, Reza Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Alian Moghadam, Hossein Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Alibakhshi, Reza Trajectory Optimization of Spherical Parallel Robots Using Artificial Neural Network [Volume 7, Issue 1, 2014]
  • Alibakhshi, Reza Vibration Analysis of Laminated Composite Plates Carrying Rotating Circular Mass [Volume 7, Issue 3, 2014]
  • Aliheidar, Masoud A New Approach for Determining the Optimum Pressure–Time Diagram in Superplastic Forming Process [Volume 6, Issue 3, 2013]
  • Alimirzaloo, V. Optimization of the Forging Process of a Gas Turbine Blade using the Finite Element Analysis and Response Surface Method [Volume 8, Issue 1, 2015, Pages 35-44]
  • Alimirzaloo, V. Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods [Volume 10, Issue 2, 2017, Pages 101-108]
  • Alimirzaloo, Vali Numerical and Analytical Investigation of the Sandwich sheet Rolling Process ConsideringCoulomb Friction [Volume 8, Issue 3, 2015]
  • Alimirzaloo, Vali Multi-Objective Optimization of the Stamping of Titanium Bipolar Plates for Fuel Cell [Volume 12, Issue 4, 2019, Pages 1-8]
  • Alipour, AliAkbar Frequency Analysis of a Cable with Variable Tension and Variable Rotational Speed [Volume 4, Issue 4, 2011]
  • Alipour, Mohamad Design and Weight Optimization of Pin Loaded Composite Plates [Volume 1, Issue 1, 2007]
  • Alipour, Roozbeh Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Alipour, Rouzbeh Investigation of Drawing Ratio Effect on Chart Rupture in Hydroforming Process [Volume 3, Issue 4, 2010]
  • Alizadeh, Ebrahim Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell [Volume 3, Issue 4, 2010]
  • Alizadeh, Javad Prediction of the Subsurface Crack Growth Lifetime in Railroad Wheel of the Iranian Railway System [Volume 4, Issue 1, 2010]
  • Alizadeh Saravi, Leila Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [Volume 8, Issue 3, 2015]
  • Al Taha, Amin Numerical Study of Non-Gray Radiative Heat Transfer in a T-shaped Furnace [Volume 13, Issue 1, 2020, Pages 39-49]
  • Altan, Mirigül Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]
  • Amelian, Sayed Shahabodin Adaptive Control of Chaotic Nonlinear Gyros with Uncertain Coefficients of Dynamical Model [Volume 4, Issue 2, 2011]
  • Ameri, Mehran Using Adaptive Meshing for Solving the Transonic Flow around Airfoils [Volume 1, Issue 3, 2008]
  • Amini, Kamran Investigating the Effect of Manganese Content on the Properties of High Manganese Austenitic Steels [Volume 10, Issue 1, 2017, Pages 75-83]
  • Amini, Kamran Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode [Volume 12, Issue 1, 2019, Pages 77-83]
  • Amini, S. Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology [Volume 8, Issue 1, 2015, Pages 13-23]
  • Amini, S. Attitude Control of Unmanned Aerial Vehicle Based on Sliding Mode Technique with Parameter Estimation [Volume 10, Issue 2, 2017, Pages 49-60]
  • Amini, S. Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects [Volume 10, Issue 4, 2017, Pages 37-44]
  • Amini, Saeed Culling Force Investigation in Turning Process via Ultrasonic Assisted Turning on Al7075 Workpiece [Volume 3, Issue 4, 2010]
  • Amini, Saeed Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Aminian, Ehsan Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [Volume 11, Issue 4, 2018, Pages 31-46]
  • Amininejad, Reza Free Vibration Analysis of S-FGM-Coated and S-FGM-Undercoated Plates with Classical Boundary Conditions [Volume 3, Issue 1, 2009]
  • Amininejad, Shahab Free Vibration Analysis of S-FGM-Coated and S-FGM-Undercoated Plates with Classical Boundary Conditions [Volume 3, Issue 1, 2009]
  • Aminzadeh, Nasrin Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]
  • Amirabadi, Hosein Abrasive flow machining: A review on new developed hybrid AFM process [Volume 9, Issue 1, 2016]
  • Amiri, Alireza Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Amiri, M. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Amiri, MohammadMahdi A New Method for Measuring Perforated Surface by Coordinate Measuring Machine (CMM) [Volume 9, Issue 4, 2016, Pages 89-97]
  • Amiri, MohammadMahdi Non Destructive Evaluation of Glass-Epoxy Composite using Impact-echo Method [Volume 10, Issue 1, 2017, Pages 85-91]
  • Amiri, MohammadMahdi Fatigue Crack Growth in Thin-Wall Pipes Subjected to Bending [Volume 12, Issue 2, 2019, Pages 83-90]
  • Amirimighadam, A. Proportional-derivative Fuzzy Control of Conjugated Polymer Actuators [Volume 5, Issue 2, 2012]
  • Amirshekari, Mojtaba Investigation of Oxygen Enriched air intake on diesel engine exhaust emissions [Volume 5, Issue 3, 2012]
  • Amraee Rad, Ghasem - Design and Analysis of Metal-Composite Vessel under Internal Pressure [Volume 14, Issue 4, 2021, Pages 1-10]
  • Ansari, Mohammad Ali Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Aosati, S. Experimental Study of the Effect of Impeller Geometrical Parameters on Fluid Hydrodynamics in Copper Solvent Extraction Mixer [Volume 10, Issue 4, 2017, Pages 21-25]
  • Arab, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Arab, Najmeddin Analytical and Experimental Analysis of Axisymmetric Deep Drawing Process [Volume 7, Issue 2, 2014]
  • Ardakani, Mohsen Dashti Using the Bees Algorithm with the Boundary Elements Method to Solve the Inverse Problem of Transient Heat Conduction [Volume 5, Issue 2, 2012]
  • Arezou, Behrouz Feature Recognition of Sheet Metal Components and Strip Layout Design in Bending Progressive Dies using Fuzzy Set Theory [Volume 2, Issue 3, 2009]
  • Arezou, Behrouz Investigation of Process Parameters, Gate Position and its Shape Effect on Dimensional Accuracy of Injected Plastic Part [Volume 2, Issue 4, 2009]
  • Arghavan, Alireza The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]
  • Asadi, Esmail Analytical and Numerical Buckling Analysis of Carbon Nanotube Reinforced Annular Composite Plates [Volume 7, Issue 2, 2014]
  • Asadollahi-Yazdi, H. Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method [Volume 10, Issue 3, 2017, Pages 41-48]
  • Asadzadeh, Mahmoud Bending Properties of Date Palm Fiber and Jute Fiber Reinforced Polymeric Composite [Volume 5, Issue 4, 2012]
  • Asgarikia, Mehdi Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Asghari, Mansour The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [Volume 11, Issue 2, 2018, Pages 85-93]
  • Asghari, Mehdi Exergy Analysis for Heat Pipe over a Permeable Vertical Thin Cylinder In a Porous Medium [Volume 2, Issue 1, 2008]
  • Asheghi Bonabi, I. Bone Surface Model Development Based on Point Clouds Extracted From CT Scan Images [Volume 10, Issue 2, 2017, Pages 61-70]
  • Ashna, Mostafa Numerical investigation of Electrohydrodynamic effect on Lift and Drag Forces on an airfoil in low Reynolds air flow [Volume 7, Issue 4, 2014]
  • Ashouri, Hojjat Improving High Cycle Fatigue Life in A Gasoline Engine Piston using Oil Gallery with Considering Stress Gradient [Volume 14, Issue 4, 2021, Pages 73-82]
  • Ashouri, R. Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets [Volume 10, Issue 3, 2017, Pages 127-135]
  • Ashourian, Mohsen Design and Implementation of Embedded Direct Drive SCARA Robot Controller with Resolved Motion Rate Control Method [Volume 13, Issue 3, 2020, Pages 83-90]
  • Ashrafi, Nariman Heat transfer of Nano-fluids as working fluids of swimming pool heat exchangers [Volume 7, Issue 1, 2014]
  • Ashrafi, Nariman Development of Boundary Layer of Highly Elastic Flow of the Upper Convected Maxwell Fluid over a Stretching Sheet [Volume 9, Issue 2, 2016, Pages 35-44]
  • Ashrafi Khorasani, Nariman Stability of Shear-Thickening and Shear-Thinning Fluids in Narrow Gap between Rotating Cylinders [Volume 4, Issue 2, 2011]
  • Ashrafi Tafreshi, َAmin Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods [Volume 11, Issue 4, 2018, Pages 99-106]
  • Asiaban, Naser Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Asiaei, Sasan Studying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic EffectsStudying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic Effects [Volume 9, Issue 4, 2016, Pages 81-87]
  • Assareh, Ehsanolah Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Atashafrooz, Meysam Effects of baffle on separated convection step flow of radiating gas in a duct [Volume 8, Issue 3, 2015]
  • Atashafrooz, Meysam Numerical Study of Coupled Non-Gray Radiation and Separation Convection Flow in a Duct using FSK Method [Volume 9, Issue 4, 2016, Pages 23-38]
  • Atashafrooz, Meysam Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]
  • Atrian, A. Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique [Volume 11, Issue 1, 2018, Pages 33-41]
  • Atrian, Amir Free Vibration Analysis of Nanoplates using Differential Transformation Method [Volume 10, Issue 1, 2017, Pages 39-49]
  • Attar, Mohammadmahdi Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates [Volume 13, Issue 2, 2020, Pages 119-127]
  • Azadeh, Mohsen Aerodynamic Parameter Corrections for Surface to Air Missiles Using Tail Flap Vibration Feedback [Volume 2, Issue 1, 2008]
  • Azadi, Davood Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding [Volume 9, Issue 3, 2016, Pages 41-47]
  • Azarafza, Reza Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Azari, Abbas Design and Analysis of a New Dental Implant using Finite Element Method [Volume 6, Issue 3, 2013]
  • Azimifar, Farhad Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]
  • Azizi, Abdolhamid Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]
  • Azizi, MeharanAli Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle [Volume 1, Issue 3, 2008]
  • Azizi, T. Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [Volume 8, Issue 2, 2015, Pages 47-54]
  • Azizzadeh, Turaj Combining Magnetic Flux Leakage and Optical Inspection Technique for Identification of Nearby Pittings [Volume 11, Issue 4, 2018, Pages 73-80]

B

  • Babaei, Ali reza Constrained Optimization of a Commercial Aircraft Wing Using Non-dominated Sorting Genetic Algorithms (NSGA) [Volume 8, Issue 4, 2015]
  • Babaei, Hashem High-Velocity Compaction of Aluminum Powder by Gas Detonation Forming Technique [Volume 13, Issue 1, 2020, Pages 17-29]
  • Babaiyan, Vahide Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Bahari, MohamadAmin Investigation of Drawing Ratio Effect on Chart Rupture in Hydroforming Process [Volume 3, Issue 4, 2010]
  • Baharvand, Mohammad Ultrasonic Assisted Equal Channel Angular ‎Extrusion Process ‎‎(UAECAE)‎ [Volume 10, Issue 1, 2017, Pages 13-22]
  • Baharvandi, HamidReza Study and Analysis of Al2O3-SiC Nanocomposite Ceramics’ Fracture Toughness using Vickers Indenter [Volume 4, Issue 3, 2011]
  • Baharvandi, H. R. Synthesis of B4C - Nano TiB2 Composite Nano Powder by the Chemical Precipitation Method [Volume 10, Issue 4, 2017, Pages 55-61]
  • Bahonar, Majid Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Bahrambeigi, Mohammad Reza A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Bahrami, Alireza The effect of orientation on optimum insulation position in the wall of a building with natural ventilation in hot and dry climate [Volume 5, Issue 3, 2012]
  • Bahrami, DAriush Numerical Study on Forced Convection of Slip Flow in A Microchannel with Smooth and Sinusoidal Walls [Volume 14, Issue 4, 2021, Pages 59-71]
  • Bahrami, Moslem Analytical and Numerical Investigation of the Deformation Length in Roll Forming Process of Circular Tubes [Volume 3, Issue 2, 2010]
  • Bahrami, Pooya Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]
  • Bahrani, S. A. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]
  • Bakhshi, Mohamad Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die [Volume 1, Issue 2, 2008]
  • Bakhshi, Mohammad An Experimental/Numerical study on the effect of forming parameters in sheet hydrodynamic deep drawing [Volume 6, Issue 1, 2013]
  • Bakhshi-Jooybari, mohamad Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Bakhtiari, Sajad Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets [Volume 13, Issue 3, 2020, Pages 51-57]
  • Bakhtiari-Nejad, Firooz Vibration Sensitivity Analysis of Nano-mechanical Piezo-Laminated Beams with Consideration of Size Effects [Volume 13, Issue 4, 2020, Pages 57-68]
  • Bak Khoshnevis, Amir An investigation of Reynolds number effect on the aerodynamics of bluff body with sharp edges [Volume 8, Issue 3, 2015]
  • Bamdad, Mahdi The Effects of Joint Clearance on the Dynamics of the 3-RPR Planar Parallel Manipulator [Volume 11, Issue 2, 2018, Pages 120-113]
  • Bamdad, Mehdi Determining Maximum Dynamic Load Carrying Capacity of Cable Robots Between Two End Points of Workspace [Volume 3, Issue 1, 2009]
  • Baniamerian, Zahara Two-Phase Heat Transfer and Pressure Drop of Carbon Dioxide in Pipes [Volume 2, Issue 2, 2009]
  • Bani Mostafa Arab, Nasrollah The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91 [Volume 12, Issue 4, 2019, Pages 9-16]
  • Banitalebi, Hooman A New Approach for Non Contact Measuring of Tension in Fixed and Moving Wires [Volume 5, Issue 4, 2012]
  • Baradaran, GholamHosein Analysis of Two Dimensional Steady-State Heat Conduction Problems by MLPG Method [Volume 4, Issue 4, 2011]
  • Baraheni, Mohammad Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Barati, Farzan Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates [Volume 13, Issue 2, 2020, Pages 119-127]
  • Barmaki, Mohsen Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode [Volume 12, Issue 1, 2019, Pages 77-83]
  • Barsoum, Zuheir Optimization of AZ61 Mg Alloy Resistance Spot Welding using Response Surface Method [Volume 12, Issue 3, 2019, Pages 35-41]
  • Barzanooni, V. Experimental study of the characteristics of the wake and drag coefficient changes of a car model in unsteady flow [Volume 8, Issue 1, 2015, Pages 55-65]
  • Barzanooni, Vahid Experimental Investigation of Turbulence Promoters effect on Characteristics of Wake related to Linear Compressor Cascade [Volume 7, Issue 2, 2014]
  • Barzegar, R. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Barzekar, Esmaeil Creep and Creep-Rupture Characteristics of Lead and Sn70%-30% Lead Alloy [Volume 3, Issue 3, 2010]
  • Barzenoni, V. Experimental Investigation of the Flow Control of Wake Cylinder by a Plate with Different Geometrical Ends [Volume 9, Issue 2, 2016, Pages 1-10]
  • Bashirzadeh, Yashar Heat transfer of Nano-fluids as working fluids of swimming pool heat exchangers [Volume 7, Issue 1, 2014]
  • Basiri, Masoud Quick and Effective Modal and Flutter Analyses for Low Aspect Ratio Wings [Volume 13, Issue 4, 2020, Pages 89-97]
  • Basohbat Novinzaddeh, Alireza Injection into Orbit Optimization using Orthogonal Polynomials [Volume 9, Issue 3, 2016, Pages 65-75]
  • Bayareh, Morteza Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Bayareh, Morteza Effect of Injection Velocity on Heat Transfer of Water/Alumina Nano Fluid in A Rectangular Microchannel [Volume 13, Issue 2, 2020, Pages 41-49]
  • Bayareh, Morteza Evaluation of ANN and ANFIS Methods in Study of the Motion of a Bubble in A Combined Couette-Poiseuille Flow [Volume 14, Issue 1, 2021, Pages 33-42]
  • Bayati Chaleshtori, Behzad Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Behagh, Amir Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Behagh, Amir Masoud Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process [Volume 13, Issue 3, 2020, Pages 75-82]
  • Behagh, Omid Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Behagh, Omid Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process [Volume 13, Issue 3, 2020, Pages 75-82]
  • Beheshtian, Saeed Experimental and Numerical Analysis of Bevel Gear Forge Method and Comparing it with Machining Method [Volume 2, Issue 3, 2009]
  • Behravesh, Amihosein Flow Balance of an Extrusion Die for Production of a U-Shaped Profile [Volume 2, Issue 4, 2009]
  • Behravesh, AmirHosein Investigation on Microstructure and Production of Coaxial Cable Foam Insulation using Butane Gas [Volume 2, Issue 1, 2008]
  • Behravesh, AmirHosein Investigation of Process Parameters, Gate Position and its Shape Effect on Dimensional Accuracy of Injected Plastic Part [Volume 2, Issue 4, 2009]
  • Behzad Mehr, Amin Effects of Cooling Air Direction and Velocity on a Branwheat Biscuit’s Temperature in the Cooling Line of Razavi Food Industries Company [Volume 2, Issue 4, 2009]
  • Beigzadeh, Borhan Studying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic EffectsStudying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic Effects [Volume 9, Issue 4, 2016, Pages 81-87]
  • Beiranvand, Peyman The Case Examination of Detection of Structural Damages on a Plate using Wavelet Transform [Volume 13, Issue 2, 2020, Pages 91-97]
  • Belhocine, Ali Finite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact [Volume 7, Issue 4, 2014]
  • Bellala, S. Murthy Qualification of Propeller by Experimental and Analytical Methods [Volume 12, Issue 1, 2019, Pages 31-39]
  • Bennett, Graham R Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Beryani, Negin Modeling and Simulation of Nano Structures with Using Molecular Dynamics [Volume 2, Issue 3, 2009]
  • Betkhoodu, Annette Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections [Volume 11, Issue 2, 2018, Pages 15-25]
  • Bidabadi, Mehdi Combustion Modeling of Lycopodium Particles by Assuming the Temperature Difference Between Gas and Particle [Volume 1, Issue 4, 2008]
  • Biglari, F. R. Optimization of the Forging Process of a Gas Turbine Blade using the Finite Element Analysis and Response Surface Method [Volume 8, Issue 1, 2015, Pages 35-44]
  • Binanejad, Jamaledin Efficiency Estimation of Olefin Furnaces in Order to Provide Methods for Increasing the Efficiency [Volume 12, Issue 3, 2019, Pages 51-62]
  • Bolandi, Hossein Design, Manufacture and Environmental Tests of Battery Pack for Spacecraft Freights [Volume 9, Issue 3, 2016, Pages 77-84]
  • Boomeri, vahid Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm [Volume 14, Issue 1, 2021, Pages 1-17]
  • Borhani, M. Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum [Volume 5, Issue 2, 2012]
  • Borhani, SeyyedAbdolSajjad Investigation of the Effect of V-Clamp Band Design Parameters on the Bending and Axial Stiffness of the Flanged Joints [Volume 12, Issue 4, 2019, Pages 17-23]
  • Boroomand, Farzad Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method [Volume 11, Issue 2, 2018, Pages 95-101]
  • Bostanian, M. Fuzzy-GSA Based Control Approach for Developing Adaptive Cruise Control [Volume 10, Issue 4, 2017, Pages 7-19]
  • Botshekanan Dehkordi, Mohsen Free Vibration Analysis of Nanoplates using Differential Transformation Method [Volume 10, Issue 1, 2017, Pages 39-49]
  • Boujari Aliabadi, M. Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining [Volume 10, Issue 1, 2017, Pages 101-107]
  • Bozorgan, Nariman Evaluation of the Heat and Mass Transfer and Exergy in the Counter Flow Wet Cooling Tower of Khuzestan Steel Company (KSC) [Volume 5, Issue 3, 2012]
  • Bozorgan, Navid THE ENERGY AND EXERGY ANALYSIS OF SINGLE EFFECT ABSORPTION CHILLER [Volume 4, Issue 4, 2011]
  • Bozorgan, Navid Evaluation of the using Al2O3/EG and TiO2/EG nanofluids as coolants in the double-tube heat exchanger [Volume 5, Issue 2, 2012]
  • Bozorgan, Navid Evaluation of the Heat and Mass Transfer and Exergy in the Counter Flow Wet Cooling Tower of Khuzestan Steel Company (KSC) [Volume 5, Issue 3, 2012]
  • Bozorgan, Navid Evaluation of γ-Al2O3/n-decane Nanofluid Performance in Shell and Tube Heat Recovery Exchanger in a Biomass Heating Plant [Volume 9, Issue 2, 2016, Pages 69-77]
  • Bozorgan, Navid Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]

C

  • Chalamalasetti, Srinivasa Rao Investigation of Pitting Corrosion Rate on Micro Plasma Arc Welded Dissimilar Weld Joints of AISI 304 and AISI 430 Stainless Steel Sheets [Volume 13, Issue 3, 2020, Pages 59-66]
  • CHALAMALASETTI, SRINIVASA RAO Application of Grey Relational Analysis for Optimizing Weld pool geometry parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L stainless steel sheets [Volume 6, Issue 1, 2013]
  • Chamoret, D. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]
  • Cherukuri, Tarasasanka Failure and Stress Analysis of Glass Fiber Reinforced Laminated Composite Pinned Joints [Volume 6, Issue 2, 2013]
  • Chockalingam, K. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]
  • Choupani, Naghdali Characterization and Determination of Critical Interlaminar Fracture Toughness of Carbon- Epoxy with Arcan Specimen [Volume 2, Issue 3, 2009]

D

  • Daeinabi, Kh. Sliding Mode Control of AFM in Cantact Mode during Manipulation of Nano-particle [Volume 6, Issue 4, 2013]
  • Daghigh, H. Thermo-Elastic and Time-Dependent Creep Evolution Behaviour of Ferritic Steel Rotating Disks using Theta Projection Concept [Volume 10, Issue 3, 2017, Pages 65-79]
  • Daghigh, V. Aging Influence on Charpy Impact Behavior of Basalt Fiber Reinforced Epoxy Composites [Volume 6, Issue 2, 2013]
  • Daghigh, V. Thermo-Elastic and Time-Dependent Creep Evolution Behaviour of Ferritic Steel Rotating Disks using Theta Projection Concept [Volume 10, Issue 3, 2017, Pages 65-79]
  • Dalayeli, H. Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [Volume 8, Issue 1, 2015, Pages 25-33]
  • DAMERA, NAGESWARA RAO Application of Grey Relational Analysis for Optimizing Weld pool geometry parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L stainless steel sheets [Volume 6, Issue 1, 2013]
  • Damircheli, M. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [Volume 8, Issue 2, 2015, Pages 37-46]
  • Damircheli, M. Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [Volume 8, Issue 2, 2015, Pages 81-90]
  • Damircheli, Mehrnoosh Geometrical Parameters of Rectangular AFM Cantilevers Producing Highest Sensitivity in Excitation of Second Mode in Air Environment [Volume 10, Issue 3, 2017, Pages 49-56]
  • Daneshmand, S. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Daneshmand, Saeed Modeling and Simulation of Nano Structures with Using Molecular Dynamics [Volume 2, Issue 3, 2009]
  • Daneshmand, Saeed The Effect of Operational Cutting Parameters in the Wire Electro Discharge Machining (WEDM) on Micro Hardness of Alloy Surface Layer [Volume 2, Issue 4, 2009]
  • Daneshmand, Saeed Investigation of Surface Roughness on Aerodynamic Characteristics of Missiles [Volume 4, Issue 1, 2010]
  • Daneshmand, Saeed Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Darabi, Hadi Modeling and Simulation of 6DOF robot Manipulators with Tactile Position-Force control [(Articles in Press)]
  • Darvishhashemi, M. Impact of Energy Dampers in Improvement of Impulsive Response of Double Layer Grids Space Structures [Volume 10, Issue 4, 2017, Pages 27-35]
  • Darvishvand, Leila A hybrid approach based on the genetic algorithm and Monte Carlo method to optimize the 3-D radiant furnaces [Volume 8, Issue 3, 2015]
  • Dashti, Asghar Multi Purpose Optimization for Design of Circular Hydrostatic Axial Bearings Using Genetic Algorithm [Volume 2, Issue 4, 2009]
  • Dashti, Mohsen Application of the Inverse Heat Conduction Method in Identifying a Cavity Inside Materials [Volume 2, Issue 2, 2009]
  • Dashti, Mohsen Multi Purpose Optimization for Design of Circular Hydrostatic Axial Bearings Using Genetic Algorithm [Volume 2, Issue 4, 2009]
  • Dashti, Saeid Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming [Volume 13, Issue 3, 2020, Pages 1-8]
  • Dashti, Shahram Design and Implementation of Embedded Direct Drive SCARA Robot Controller with Resolved Motion Rate Control Method [Volume 13, Issue 3, 2020, Pages 83-90]
  • Dashtian Gerami, N. Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [Volume 8, Issue 2, 2015, Pages 81-90]
  • DashtiArdakani, Mohsen Investigating the Effect of Different Boundary Conditions on the Identification of a Cavity Inside Solid Bodies [Volume 4, Issue 4, 2011]
  • Dass, kali Effects of tool material on the machinability of titanium (Grade-5) alloy by using RSM [Volume 6, Issue 3, 2013]
  • Davar, A. Free Vibrations of Functionally Graded Circular Cylindrical Shells under Internal Pressure [Volume 6, Issue 4, 2013]
  • Davar, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Davar, Ali Numerical and experimental static bending analysis of composite sandwich panels with grid-stiffened cores before and after transverse impact loading [(Articles in Press)]
  • Davar, Ali Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods [(Articles in Press)]
  • Davar, Ali Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load [(Articles in Press)]
  • Davar, Ali Dynamic response of FGM plates under blast load [(Articles in Press)]
  • Davari, Ali Reza VISCOUS DRAG REDUCTION ON AXISYMMETRIC BODIES USING HELICAL RIBLETS [Volume 7, Issue 4, 2014]
  • Davoodabadi, Ali Asghar Numerical and experimental static bending analysis of composite sandwich panels with grid-stiffened cores before and after transverse impact loading [(Articles in Press)]
  • Davoodi, Behnam Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]
  • Dehghan, GholamHosein Investigation of Machining Parameters in Wire Electrical Discharge Machining (WEDM) on the Surface Roughness & Cutting Speed of Tungsten Carbide [Volume 2, Issue 2, 2009]
  • Dehghani, Maryam Design and Analysis of Bicycle Helmet Made of PETg and ABS with Honeycomb Structure Against External Impacts using Abaqus Software [Volume 14, Issue 1, 2021, Pages 83-90]
  • Dehghani Rorani, M. Design and Control of a 3 DOF Hand Skeleton for Rehabilitation after Stroke [Volume 8, Issue 2, 2015, Pages 17-28]
  • Dehghanpour, Sajjad Energy Absorption by Thin-Walled Tubes with various Thicknesses in Rectangular and Square Sections under Different Quasi-Static Conditions: Experimental and Numerical Studies [Volume 9, Issue 2, 2016, Pages 11-18]
  • Dirisala, Venkatratnam Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels [Volume 13, Issue 2, 2020, Pages 51-64]
  • Djavanroodi, Faramarz Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]
  • Djavanroodi, Faramarz A Practical Approach to Analysis of Hydromechanical Deep Drawing of Superalloy Sheet Metals by Using Finite Element Method [Volume 6, Issue 1, 2013]
  • Djavanroodi, Faramarz Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]
  • Doniavi, A. Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods [Volume 10, Issue 2, 2017, Pages 101-108]
  • Doniavi, Ali Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method [Volume 9, Issue 3, 2016, Pages 19-29]

E

  • EbnodinHamidi, Hesamodin Extracting Lateral Transfer Function of a Remotely Piloted Helicopter by System Identification Method Using 3-DOF Test Stand [Volume 4, Issue 2, 2011]
  • Ebrahimi, Farzad An Analytical Model for Free Vibration Analysis of Smart Annular FGM Plates Integrated with Piezoelectric Layers [Volume 4, Issue 2, 2011]
  • Ebrahimi, Farzad Vibration Analysis of an Initially Pre-stressed Rotating Carbon Nanotube Employing Differential Transform Method [Volume 8, Issue 4, 2015]
  • Ebrahimi, Jamshid Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Ebrahimi, Mahmoud Comparative Investigation in a Turbine Blade Passage Flows with Several Different Turbulence Models [Volume 4, Issue 4, 2011]
  • Ebrahimi, Mehdi Numerical Investigation of Laser Bending of Perforated Sheets [Volume 9, Issue 2, 2016, Pages 53-60]
  • Ebrahimi, Reza Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation [Volume 10, Issue 1, 2017, Pages 57-74]
  • Ebrahimi, Saeed Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Ebrahimi, Saeed Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]
  • Ebrahimi Keshmarzi, Hamed Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis [Volume 12, Issue 1, 2019, Pages 51-58]
  • Ebrahimpour, A. Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [Volume 10, Issue 4, 2017, Pages 75-83]
  • Ebrahimzadeh, Mahdi Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies [Volume 11, Issue 2, 2018, Pages 1-13]
  • Eftekhari, Mohammad Comparison of Neural Networks and Fuzzy System for Estimation of Heat Transfer Between Contacting Surfaces [Volume 12, Issue 2, 2019, Pages 91-101]
  • Eftekhari, Mohammad Studying the Effect of Different Vortex Generator Geometries and Arrangements on Heat Transfer Performance of Heat Sinks [Volume 13, Issue 3, 2020, Pages 21-31]
  • Eftekhari, Sayyed Ali Incremental Forming of Polymeric Sheet Printed by Fused Deposition Modeling [Volume 12, Issue 3, 2019, Pages 85-91]
  • Ehsani, amirhossein Design of different geometry structures tissue scaffolds for additive manufacturing [(Articles in Press)]
  • Ehteshamzadeh, Maryam An Investigation on Hydrogen Embrittlement of the Cr-Si Spring Steel Using Slow Strain Rate Test and Weibull Model [Volume 8, Issue 4, 2015]
  • Eivazi bagheri, Hadi Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Ekhteraei Toussi, Hamid Atomistic and Continuum Simulations on Tensile Property of a Single Crystal Metal with Nano-holes [Volume 1, Issue 1, 2007]
  • Elhami, MohamadReza Vibration Analysis and Design of Dynamic Absorber in a Vertical Drilling Machine [Volume 2, Issue 2, 2009]
  • Elhami, MohamadReza Analysis of Off-road Performance for a Tracked Vehicle [Volume 9, Issue 4, 2016, Pages 109-119]
  • Elhami, Mohammad Reza Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Elyasi, Majid Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]
  • Elyasi, Majid Effects of friction stir welding tool plunge depth on microstructure and texture evolution of AA1100 to A441 AISI joint [Volume 9, Issue 1, 2016]
  • Elyasi, Majid Multi-Objective Optimization of the Stamping of Titanium Bipolar Plates for Fuel Cell [Volume 12, Issue 4, 2019, Pages 1-8]
  • Emam, MohamadReza Investigation and Analysis of CNG Tank Mass Effects On Main Components of Vehicle Performance [Volume 1, Issue 4, 2008]
  • Emam, Sayed MohamadReza Parametric Analysis of Square Thin Walled Section in Energy Absorption due to Oblique Load [Volume 3, Issue 3, 2010]
  • Enami, Moein Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on the AL2024T3 Joint Strength [(Articles in Press)]
  • Eryildiz, Meltem Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]
  • Esfahanian, Mohamad Vehicle Interior Structure Borne Noise Calculation Using Finite Element Method [Volume 2, Issue 4, 2009]
  • Esfandiar, H. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Esfandiar, Habib Analysis of Effective Factors on Rail Failure and Exerted Stress on Rail and Wheel [Volume 4, Issue 2, 2011]
  • Esfandiar, Habib Optimal Trajectory Planning for Flexible Mobile Manipulators under Large Deformation Using Meta-heuristic Optimization Methods [Volume 9, Issue 1, 2016]
  • Esfandiary, Esmaeil Analysis of Liquid - Fuel Vortex [Volume 1, Issue 3, 2008]
  • Eskafi, Mohamad Reza modeling and normal stress analysis in viscoelastic damper [Volume 6, Issue 1, 2013]
  • Eskandari Jam, Jafar Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Eskandari Jam, Jafar Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Eskandari Jam, Jafar Numerical and experimental static bending analysis of composite sandwich panels with grid-stiffened cores before and after transverse impact loading [(Articles in Press)]
  • Eskandari Jam, Jafar Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods [(Articles in Press)]
  • Eskandari Jam, Jafar Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load [(Articles in Press)]
  • Eskandari shahraki, Majid Bending and Buckling Analysis of a Nth-Order Shear Deformation Nanoplate using Modified Couple Stress Theory [Volume 14, Issue 4, 2021, Pages 27-36]
  • Eskandari Shahraki, Majid Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Eskandari Shahraki, Majid Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Eskandari Shahraki, Majid Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods [(Articles in Press)]
  • Eskandari Shahraki, Majid Bending and vibration analysis of a Mindlin rectangular nanoplate using modified couple stress theory and Navier's solution [(Articles in Press)]
  • Eskandarzadeh, Mehdi Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method [Volume 12, Issue 1, 2019, Pages 41-50]
  • Eslami Farsani, R. Aging Influence on Charpy Impact Behavior of Basalt Fiber Reinforced Epoxy Composites [Volume 6, Issue 2, 2013]
  • Eslami-Farsani, Reza The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]
  • Esmaeili, Hosein Machining Parameters Optimization of Self – Rotating Turing Tools Via Taguchi Method [Volume 1, Issue 3, 2008]
  • Esmaeili, Saeid Incremental Forming of Polymeric Sheet Printed by Fused Deposition Modeling [Volume 12, Issue 3, 2019, Pages 85-91]
  • Esmaeili, Saeid Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Esmaeilzadeh, Peyman Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining [Volume 13, Issue 2, 2020, Pages 23-31]
  • Esmaili, Qadir A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]
  • Esmailian, Mojtaba Abrasive flow machining: A review on new developed hybrid AFM process [Volume 9, Issue 1, 2016]
  • Etemadi Haghighi, Shahram Dynamic Modelling and Control of a Dielectric Elastomer Actuator with Two Degrees of Freedom [Volume 11, Issue 3, 2018, Pages 93-99]
  • Etemadi Haghighi, Shahram Evaluating the effect of the second invariant of deformation tensor in the axial and azimuthal shear deformations [(Articles in Press)]
  • Etemadi Haghighi, Shahram Design of different geometry structures tissue scaffolds for additive manufacturing [(Articles in Press)]
  • Etminan, Amin Fluctuating Flow Characteristics and Heat Transfer from Two in-Tandem Square Cylinders [Volume 3, Issue 1, 2009]
  • Etminan, Amin Flow and Heat Transfer over two Bluff Bodies from Very Low to High Reynolds Numbers in the Laminar and Turbulent Flow Regimes [Volume 6, Issue 2, 2013]
  • Ettefagh, Mir Mohammad Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]

F

  • Fadaei, Abbas Optimizing the Parameters Contributing to Riveting Quality Using Imperialist Competitive Algorithm and Predicting the Objective Function via the Three Models MLR, RBF, and ANN-GA [Volume 9, Issue 1, 2016]
  • Fadaei, Abbas Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections [Volume 11, Issue 2, 2018, Pages 15-25]
  • Fadaei, Abbas Effect of TID-dressing on Fatigue Life Stress Concentration Factor in St37-2Butt Weldments [Volume 12, Issue 1, 2019, Pages 115-123]
  • Fallah, M.M. Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation [Volume 11, Issue 1, 2018, Pages 43-50]
  • Fallah, Mohammad Meghdad Investigating the Effect of Cutting Condition on the Plastic Energy in Turning Process of AISI 1050 [Volume 12, Issue 3, 2019, Pages 1-8]
  • Farahani, M. Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure [Volume 10, Issue 2, 2017, Pages 133-141]
  • Farahani, M. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Farahani, Mohammadreza Determination of Local Constitutive Properties of Aluminum using Digital Image Correlation: A Comparative Study Between Uniform Stress and Virtual Fields [Volume 12, Issue 1, 2019, Pages 67-75]
  • Farahani, Mohammadreza Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on the AL2024T3 Joint Strength [(Articles in Press)]
  • Farahat, Said Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Farahmand, F. Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects [Volume 10, Issue 4, 2017, Pages 37-44]
  • Farahmand, Farzam Ultrasonic Assisted Drilling of Bone [Volume 1, Issue 4, 2008]
  • Farahmandian, Mahdi Theoretical and Experimental Study on Vibration of Cracked Shafts Using Order Analysis [Volume 7, Issue 2, 2014]
  • Farahnakian, Masoud Experimental Study on Surface Roughness and Flatness in Lapping of AISI 52100 Steel [Volume 9, Issue 2, 2016, Pages 61-68]
  • Farahnakian, Masoud Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Farahnakian, Masoud Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process [Volume 13, Issue 3, 2020, Pages 75-82]
  • Faraji, Ghader Severe Plastic Deformation of Nanostructured Cu-30%Zn Tubes at Increased Temperatures [Volume 9, Issue 3, 2016, Pages 85-91]
  • Faraji, Ghader Microstructure and Mechanical Properties of AZ91 Magnesium Cup Processed by a Combined Backward Extrusion and Constrained Ironing Method [Volume 10, Issue 1, 2017, Pages 23-30]
  • Faraji, Ghader Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method [Volume 12, Issue 1, 2019, Pages 41-50]
  • Farazi, Sima Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle [Volume 1, Issue 3, 2008]
  • Fardaghaie, Ata Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness) [Volume 11, Issue 2, 2018, Pages 131-139]
  • Fardaghaie, Ata The application of the extended isogeometric analysis (XIGA) with K-refinement approach for the prediction of fatigue life in linear elastic fracture mechanic [(Articles in Press)]
  • Farhadi, Mahdi Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load [(Articles in Press)]
  • Farhadi, Mousa Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell [Volume 3, Issue 4, 2010]
  • Farhadipour, P. Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution [Volume 10, Issue 4, 2017, Pages 91-98]
  • Farhang, Majid Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on the AL2024T3 Joint Strength [(Articles in Press)]
  • Farhangdoost, Khalil Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Farokhi Nejad, Ali Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Farrokhfal, Hamid Quick and Effective Modal and Flutter Analyses for Low Aspect Ratio Wings [Volume 13, Issue 4, 2020, Pages 89-97]
  • FARROKHI, MOHAMMAD Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem [Volume 5, Issue 2, 2012]
  • Farsijani, Hassan Design of Cellular Manufacturing using Mathematical Programming: a comparative study with simulation modelling [Volume 6, Issue 2, 2013]
  • Farzin, Mahmoud Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die [Volume 1, Issue 2, 2008]
  • Farzin, Mahmoud A New Approach for Determining the Optimum Pressure–Time Diagram in Superplastic Forming Process [Volume 6, Issue 3, 2013]
  • Farzin, Mahmoud Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks [Volume 12, Issue 2, 2019, Pages 119-132]
  • Fasihbeygi, Masoud Heat Exchangers in A C3MR LNG Plant, Cooling Curves and Their Effects on Efficiency [Volume 3, Issue 3, 2010]
  • Fathi, A. R. Trajectory Path Planning of Cable Driven Parallel Manipulators, Considering Masses and Flexibility of the Cables [Volume 9, Issue 3, 2016, Pages 57-64]
  • Fathi, Arman Determining the Optimal Size and Operation Sensitivity Analysis of a CCHP System Implemented in a Residential unit in Tehran [Volume 6, Issue 3, 2013]
  • Fathi, Shayan Comparison of Neural Networks and Fuzzy System for Estimation of Heat Transfer Between Contacting Surfaces [Volume 12, Issue 2, 2019, Pages 91-101]
  • Fathi, Shayan Studying the Effect of Different Vortex Generator Geometries and Arrangements on Heat Transfer Performance of Heat Sinks [Volume 13, Issue 3, 2020, Pages 21-31]
  • Fathollahi, Reza Investigation and Analysis of CNG Tank Mass Effects On Main Components of Vehicle Performance [Volume 1, Issue 4, 2008]
  • Fatouraee, Nasser Design and Development of Limits of Stability and Postural Stability Protocols for a Computerized Dynamic Posturography [Volume 7, Issue 2, 2014]
  • Fazeli, AhmadReza Statistical Control of Root Dimensions of Gas Turbine Blade in Creep Feed Grinding Process [Volume 4, Issue 2, 2011]
  • Fazeli, Mohammad Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Fazli, Ali Investigation of The Effects of Process Parameters on The Welding Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 9, Issue 2, 2016, Pages 45-52]
  • Foorginejad, Abolfazl Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]
  • Foorginejad, Abolfazl Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Forouzan, MohamadReza Creep and Creep-Rupture Characteristics of Lead and Sn70%-30% Lead Alloy [Volume 3, Issue 3, 2010]
  • Forouzan, MohammadReza Investigation of Process Parameters on Hot Ring Rolling by Coupled Thermo-Mechanical 3D-FEA [Volume 4, Issue 4, 2011]

G

  • G, Uma Maheswara Rao Investigation of Pitting Corrosion Rate on Micro Plasma Arc Welded Dissimilar Weld Joints of AISI 304 and AISI 430 Stainless Steel Sheets [Volume 13, Issue 3, 2020, Pages 59-66]
  • Galehdari, Ali Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies [Volume 11, Issue 2, 2018, Pages 1-13]
  • Galloway, Greg Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Gandjalikhan Nassab, S. A. Effects of baffle on separated convection step flow of radiating gas in a duct [Volume 8, Issue 3, 2015]
  • Gandjalikhan Nassab, Seyyed Abdolreza Numerical Study of Coupled Non-Gray Radiation and Separation Convection Flow in a Duct using FSK Method [Volume 9, Issue 4, 2016, Pages 23-38]
  • Ganjalian Nasab, AbdoReza Heat Transfer Characteristics and Optimization of a Porous Radiant Air Heater, Using DOM, under the Influence of 2-D Rectangular Radiative Field [Volume 3, Issue 4, 2010]
  • Ganjefar, Soheil Optimization, Controller and Observer Design of a Reconfigurable Mobile Robot Using Genetic Algorithm and Neural Network [Volume 3, Issue 2, 2010]
  • Ghadami, Farid Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts [Volume 7, Issue 1, 2014]
  • Ghaderi, Reza Dynamic Modeling and Sensitivity Analysis of the Spherical Nanoparticle Topography using Piezoelectric Microcantilevers [Volume 9, Issue 1, 2016]
  • Ghaderi, Reza Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Ghaderi, Reza Vibration Analysis and Sensitivity Analysis of Semi-Submerged Multilayer Piezoelectric Microcantilever [Volume 14, Issue 4, 2021, Pages 11-18]
  • Ghadimi, Morteza Effects of Mechanical Alloying on microstructure and microhardness of Nanocrystalline Ni–50at.% Ti Shape Memory Alloy’ [Volume 5, Issue 5, 2012]
  • Ghadimi, Morteza Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]
  • Ghadiri, Younes Experimental Investigation of Maximum Achievable Convolution Height of Metallic Bellows in Hydroforming Process [Volume 11, Issue 2, 2018, Pages 69-74]
  • Ghadirinejad, Mazyar Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Ghafouri, Ashkan Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Ghafouri Sayyad, Amir Evaluating the effect of the second invariant of deformation tensor in the axial and azimuthal shear deformations [(Articles in Press)]
  • Ghahraei, Omid The Impact of Die Corner Radius and Friction Coefficient on Bulge Forming of T-Shaped Copper Tubes using Finite-Element Method and Experimental Analysis [Volume 10, Issue 1, 2017, Pages 31-38]
  • Ghahramani, Zahra Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Ghahremani Darvish, Moharram Design, Manufacture and Environmental Tests of Battery Pack for Spacecraft Freights [Volume 9, Issue 3, 2016, Pages 77-84]
  • Ghaitani, Mohammad Mehdi Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Ghajar, Mohsen Simulation of Mode I Strain Energy Release Rate for Rectangular Laminated Composite Plate Using a Simple Finite Element Model [Volume 3, Issue 4, 2010]
  • Ghajar, Rahmatollah Prediction of the Subsurface Crack Growth Lifetime in Railroad Wheel of the Iranian Railway System [Volume 4, Issue 1, 2010]
  • Ghajar, Rahmatollah Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Ghanavati, Mehdi Control and Guidance of an Underwater Robot via Fuzzy Control Method [Volume 4, Issue 1, 2010]
  • Ghanbarzadeh, Afshin Control and Guidance of an Underwater Robot via Fuzzy Control Method [Volume 4, Issue 1, 2010]
  • Ghannad, Mehdi A thermoelasticity solution for thick cylinders subjected to thermo-mechanical loads under various boundary conditions [Volume 8, Issue 4, 2015]
  • Gharavi, Farhad Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints [Volume 11, Issue 1, 2018, Pages 87-94]
  • Gharavi, Farhad Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode [Volume 12, Issue 1, 2019, Pages 77-83]
  • Gharavi, Farhad Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding [Volume 13, Issue 4, 2020, Pages 109-120]
  • Gharib, Morteza Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Ghasemi, Abbas Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Ghasemi, AhmadReza Analytical and Numerical Determination of Residual Stresses in Thick Composite Laminated Plates [Volume 4, Issue 3, 2011]
  • Ghasemi, Amir Hossein Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Ghasemi, Behzad Laminar Mixed Convection Flow in a Shallow Two-Sided Lid-Driven Rectangular Enclosure [Volume 1, Issue 2, 2008]
  • Ghasemi, Behzad Natural Convection in an Inclined Partitioned Enclosure with Local Heat Source [Volume 3, Issue 2, 2010]
  • Ghasemi, Bouzar Analysis of Liquid - Fuel Vortex [Volume 1, Issue 3, 2008]
  • Ghasemi, Jalal Finite Volume-Lattice Boltzmann Modeling of Viscous Flows [Volume 4, Issue 2, 2011]
  • Ghasemian, Kasra A Novel Approach for Optimization of Vehicle Noise Insulators [Volume 13, Issue 3, 2020, Pages 9-20]
  • Ghassemi, Aazam Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Ghassemi, Aazam Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation [Volume 10, Issue 1, 2017, Pages 57-74]
  • Ghatee, M. Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method [Volume 10, Issue 3, 2017, Pages 41-48]
  • Ghayour, Mostafa Dynamic Analysis and Path Control of a Snake Like Robot [Volume 2, Issue 2, 2009]
  • Ghazanfari, Valiyolah Thermal-hydraulic Analysis of Helical Coil Steam Generator of The Multi-Application Small Light Water Reactor (MASLWR) Test Loop Using Drift Flux Model [Volume 11, Issue 3, 2018, Pages 83-91]
  • Ghazikhani, M. Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [Volume 8, Issue 1, 2015, Pages 97-106]
  • Ghazikhani, Mohsen Investigation of water balance in water recovery of closed steam injection gas turbine cycles [Volume 6, Issue 3, 2013]
  • Gheibi, Ali Thermodynamic Analysis of a Modified Two-Stage Trans-Critical CO2 Refrigeration Cycle with Multi Inter-Cooling System [Volume 10, Issue 3, 2017, Pages 97-104]
  • Gheisari, AmirHossein Investigation of Process Parameters on Hot Ring Rolling by Coupled Thermo-Mechanical 3D-FEA [Volume 4, Issue 4, 2011]
  • Ghezavati, J. Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [Volume 10, Issue 4, 2017, Pages 63-73]
  • Ghiasvand, Amir The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Ghoddosian, Ali The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]
  • GHodousian, Ali Influence of Element Order in Various Aspect of Evolutionary Structural Optimization [Volume 3, Issue 2, 2010]
  • Gholami, Adel Determining the Optimal Size and Operation Sensitivity Analysis of a CCHP System Implemented in a Residential unit in Tehran [Volume 6, Issue 3, 2013]
  • Gholami, Mostafa Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Gholipoor, A. Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method [Volume 9, Issue 3, 2016, Pages 19-29]
  • Gholipoor, Ahad Experimental investigations of microstructure of Al 1100 alloys welded by friction stir welding process [Volume 8, Issue 3, 2015]
  • Ghorbanhosseini, Sadegh Implementation of the Quasi-Brittle Damage Model for 2024 Aluminum Alloy under Periodic Loading [Volume 12, Issue 2, 2019, Pages 111-118]
  • Ghorbanhosseini, Sadegh A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Ghorbani, Mohammad Taghi A semi-analytical solution for time-variant thermoelastic creep analysis of functionally graded rotating disks with variable thickness and properties. [Volume 5, Issue 2, 2012]
  • Ghorbani, M. T. Path Following of a High Speed Planing Boat Based on Gauss Pseudospectral Method [Volume 7, Issue 1, 2014]
  • Ghorbanpour Arani, Ali Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Ghoreishi, Majid Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM [Volume 10, Issue 3, 2017, Pages 31-40]
  • Gibson, Ian Developing a 3D Multi-Body Model of the Scoliotic Spine with Lateral Bending Motion for Comparison of Ribcage Flexibility [Volume 6, Issue 1, 2013]
  • Giradkar, K. V. Investigations on Surface Integrity and Electrochemical Behavior of Machined Co-Cr-Mo Bio-implant Alloy [Volume 9, Issue 4, 2016, Pages 51-58]
  • Giri, V. K. Analysis and Interpretation of Bearing Vibration Data Using Principal Component Analysis and Self - Organizing Map [Volume 9, Issue 1, 2016]
  • Golabi, Sa'id Reducing stress concentration factor around a hole on a plate by piezoelectric patch [Volume 6, Issue 4, 2013]
  • Golbakhshi, Hossein Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]
  • Golbakhshi, Hossein Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Golestanian, Edvin Numerical Study of Effective Parameters on Cold Rolling of Tri-layers Al/St/Al and Cu/Al/Cu [Volume 3, Issue 1, 2009]
  • Golestanian, Hossein Free Vibration of Defective Nanographene using Molecular Dynamics Simulation and Differential Quadrature Method [Volume 14, Issue 4, 2021, Pages 83-90]
  • Golestanian*, Hossein Investigation of CNT Defects on Mechanical Behavior of Cross linked Epoxy based Nanocomposites by Molecular Dynamics [Volume 9, Issue 1, 2016]
  • Golmakani, M.E. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Golmakani, Mohammad Esmaeil Buckling Analysis of Orthotropic Annular Graphene Sheet with Various Boundary Conditions in an Elastic Medium [Volume 13, Issue 2, 2020, Pages 73-90]
  • Gong, Ningning Approximate model and clonal selection algorithm based optimization of heating channels for variotherm injection mold [Volume 6, Issue 4, 2013]
  • Gorbanpour, Allahyar Optimizing the Parameters Contributing to Riveting Quality Using Imperialist Competitive Algorithm and Predicting the Objective Function via the Three Models MLR, RBF, and ANN-GA [Volume 9, Issue 1, 2016]
  • Gorji, Abdolhamid An Experimental/Numerical study on the effect of forming parameters in sheet hydrodynamic deep drawing [Volume 6, Issue 1, 2013]
  • Gorji, Hamid Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Gorji-Bandpy, Mofid Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [Volume 8, Issue 3, 2015]
  • Goshayeshi, HamidReza Numerical Simulation of Laminar and Turbulent Mixed Convection in Rectangular Enclosure with Hot upper Moving Wall [Volume 3, Issue 2, 2010]
  • Goshayeshi, HamidReza The Effect of Packing on Temperature and Pressure Drop in Mechanical Counter Flow Cooling Tower [Volume 4, Issue 3, 2011]
  • Goshayeshi, Hamid Reza Experimental Investigation of Pool Boiling of Single Wall Carbon Nanotubes (SWCNTs) with Different Grooved Surfaces [Volume 12, Issue 3, 2019, Pages 77-84]
  • Goudarzi, Marjan Finite Volume Solutions of 2-D Steady Incompressible Navier-Stokes Equations in Driven Skewed Cavity Flow with Non-Orthogonal Grid Mesh [Volume 1, Issue 1, 2007]
  • Goudarzi, Marjan Numerical Studies of Laminar Natural Convection in a Square Cavity with Orthogonal Grid Mesh by Finite Volume Method [Volume 1, Issue 2, 2008]
  • Goudarzi, Marjan Numerical Investigation of Heat Transfer in Circular Perforated Plates Exposed to Parallel Flow and Suction [Volume 1, Issue 3, 2008]
  • Guang Li, Wen Impeller trimming of an Industrial Centrifugal Viscous Oil Pump [Volume 5, Issue 1, 2011]

H

  • Habibalahi, Abbas Application of Pulsed eddy current technique to stress and residual stress measurement [Volume 7, Issue 1, 2014]
  • Habibi Sooha, Yousef Investigation of the AFM Indenter’s Geometry Effect On Micro/Nano Biological Cells’ Indentation [Volume 13, Issue 4, 2020, Pages 99-108]
  • Habibnejad, Moharam Determining Maximum Dynamic Load Carrying Capacity of Cable Robots Between Two End Points of Workspace [Volume 3, Issue 1, 2009]
  • Habibnejad, Moharam Frequency Analysis of a Cable with Variable Tension and Variable Rotational Speed [Volume 4, Issue 4, 2011]
  • Habibnejad, Moharam Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [Volume 8, Issue 3, 2015]
  • Habibnejad, Moharam Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Habibnejad, Moharam Investigation of the AFM Indenter’s Geometry Effect On Micro/Nano Biological Cells’ Indentation [Volume 13, Issue 4, 2020, Pages 99-108]
  • Habibnejad korayem, Moharam Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]
  • Habibnejad korayem, Moharam Design and Manufacturing the Torque Gauge of ICaSbot and Implementing its Data Transfer Protocol [Volume 6, Issue 2, 2013]
  • Habibnejad Korayem, A. Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Habibnejad Korayem, Amin Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Habibnejad Korayem, Moharam Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Habibnejad Korayem, Moharam Frequency Response of AFM Nano Robot in Liquid by considering the effect of Cantilever's dimension and Environmental Parameters [Volume 7, Issue 4, 2014]
  • Habibnejad Korayem, Moharam Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [Volume 8, Issue 3, 2015]
  • Habibnejad Korayem, Moharam Optimal Trajectory Planning for Flexible Mobile Manipulators under Large Deformation Using Meta-heuristic Optimization Methods [Volume 9, Issue 1, 2016]
  • Hadavi, S. M. M. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Hadavinia, H. Free Vibrations of Functionally Graded Circular Cylindrical Shells under Internal Pressure [Volume 6, Issue 4, 2013]
  • Haddadi, Elyas The Choice of Automatic Welding Process and Technology by using WELD-EXP. Software [Volume 1, Issue 1, 2007]
  • Haddadpour, H. Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [Volume 8, Issue 1, 2015, Pages 45-54]
  • Hadipeykani, Majid Thermomechanical Properties of the Polymeric Nanocomposite Predicted by Molecular Dynamics [Volume 12, Issue 4, 2019, Pages 25-32]
  • Hadipour, Mojtaba Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]
  • Haghani, A. Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [Volume 8, Issue 1, 2015, Pages 67-75]
  • Haghani, Ahmad Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Haghpanahi, Mohammad Optimal Trajectory Planning for Flexible Mobile Manipulators under Large Deformation Using Meta-heuristic Optimization Methods [Volume 9, Issue 1, 2016]
  • Haghpanahi, Mohammad Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements [Volume 13, Issue 4, 2020, Pages 39-47]
  • Haghpanahi, Mohammad Design of different geometry structures tissue scaffolds for additive manufacturing [(Articles in Press)]
  • Hajiahmad, Ali Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Haji Mohamadi, Sayad The Finite Element Method and Genetic Algorithm Approaches on Shape Optimization of Prosthesis According to Fatigue Behavior [Volume 3, Issue 3, 2010]
  • Hajipour, Alireza Comparison of performances of air standard Atkinson, Diesel and Otto cycles with constant specific heats [Volume 6, Issue 3, 2013]
  • Hajizadeh, Iman Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Hajizadeh, khatereh Developing a 3D Multi-Body Model of the Scoliotic Spine with Lateral Bending Motion for Comparison of Ribcage Flexibility [Volume 6, Issue 1, 2013]
  • Hamedi, Mohsen Study of the Resonant Frequency of Unimorph Triangular V-shaped Piezoelectric Cantilever Energy Harvester [Volume 8, Issue 4, 2015]
  • Hamidizadeh, Hadi Numerical Study of Microbeam with Geometric Discontinuity Under Electrostatic Load using Strain Gradient Theory [Volume 13, Issue 1, 2020, Pages 59-68]
  • Hamzeloo, Seyyed Reza Investigating the Effect of Cutting Condition on the Plastic Energy in Turning Process of AISI 1050 [Volume 12, Issue 3, 2019, Pages 1-8]
  • Harirbafan, Ebrahim Estimation of Thrust Stand Structure Fatigue Life Under Solid Motors Random Vibrations Effects [Volume 1, Issue 4, 2008]
  • Harirbafan, Ebrahim Dynamic Design Principles of a Thrust Stand and Methods of Improving Frequency Response [Volume 2, Issue 1, 2008]
  • Harirbafan, Ebrahim Analytical and Simulation of Free-Free Beam Subjected to Concentrated Impact Loadings [Volume 2, Issue 1, 2008]
  • Harirbafan, Ebrahim Analytical Solution and Simulation of Flexible Joint in Thrust Vector Control System under Bending [Volume 2, Issue 2, 2009]
  • Hasanian, M. Gas Pipeline Corrosion Mapping Using Pulsed Eddy Current Technique [Volume 5, Issue 1, 2011]
  • Hasanian, Masoud Design, Manufacture and Environmental Tests of Battery Pack for Spacecraft Freights [Volume 9, Issue 3, 2016, Pages 77-84]
  • Hasanpour, Kourosh Finite Element Analysis of Self Destruction Mechanism in a Mechanical Controller [Volume 3, Issue 2, 2010]
  • Hasanpour, Kourosh Analysis of the Dynamical Behavior of the Delay Mechanism in a Projectile Motion Controller, Using 3D Finite Element Simulation [Volume 3, Issue 3, 2010]
  • Hasanzadeh, Hasan Numerical Analysis of Plate’s Vibration Behavior with Non-linear Edge under Various Boundary Conditions [Volume 1, Issue 2, 2008]
  • Hasanzadeh, Hasan Numerical Study of Increasing Error Order in Finite Difference Method Used for Analyzing the Rectangular Isotropic Plate's Vibration Behavior [Volume 1, Issue 3, 2008]
  • Hasanzadeh, Hasan On Using the Fourth Order Finite Difference Method in Studying Orthotropic Rectangular Plate's Vibration Behavior [Volume 1, Issue 4, 2008]
  • Hashemi, Ramin Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis [Volume 12, Issue 1, 2019, Pages 51-58]
  • Hashemi, Sayed Alireza Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Hashemi, Seyed Jalal Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets [Volume 13, Issue 3, 2020, Pages 51-57]
  • Hashemi, Seyed Jalal Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process [Volume 14, Issue 1, 2021, Pages 43-49]
  • Hashemi Ghiri, S. J. Experimental Investigation of Effective Parameters on a New Incremental Tube Bulging Method Using Rotary Tool [Volume 10, Issue 2, 2017, Pages 83-91]
  • Hashemzadeh, Majid The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Hassani, M. Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator [Volume 10, Issue 2, 2017, Pages 71-81]
  • Hatami, Amin Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [Volume 8, Issue 4, 2015]
  • Heidari, Ali Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method [Volume 12, Issue 3, 2019, Pages 25-33]
  • Heidari, Ali Evaluation of S/N Diagram in Welded Joints Based on Different Fatigue Failure Criteria [Volume 13, Issue 3, 2020, Pages 67-74]
  • Heidari, M. Prediction of Residual Stresses by Radial Basis Neural Network in HSLA-65 Steel Weldments [Volume 8, Issue 2, 2015, Pages 55-64]
  • Heidari, M. Genetic Algorithm and ANN for Estimation of SPIV of Micro Beams [Volume 10, Issue 4, 2017, Pages 45-54]
  • Heidari, Mohammad Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Hemmasian, MohamadMehdi Drag-Reduction Characteristics in Air Flow over the Iced Surface at Re>104 [Volume 1, Issue 2, 2008]
  • Hemmati, S. J. Bone Surface Model Development Based on Point Clouds Extracted From CT Scan Images [Volume 10, Issue 2, 2017, Pages 61-70]
  • Hesari, Yaser Dynamic Modelling and Control of a Dielectric Elastomer Actuator with Two Degrees of Freedom [Volume 11, Issue 3, 2018, Pages 93-99]
  • Heydari, A. Buckling of Functionally Graded Beams with Rectangular and Annular Sections Subjected to Axial Compression [Volume 5, Issue 1, 2011]
  • Heydari, Abbas Elasto-plastic Analysis of Thick Walled Tanks Subjected to Internal Pressure [Volume 3, Issue 1, 2009]
  • Heydari, Abbas Buckling Analysis of Discontinues Fractional Axially Graded Thin Beam with Piecewise Axial Load Function Rested on Rotational Spring Hinges [Volume 13, Issue 2, 2020, Pages 99-108]
  • Heydari, Mojtaba Estimation of Thrust Stand Structure Fatigue Life Under Solid Motors Random Vibrations Effects [Volume 1, Issue 4, 2008]
  • Heydari, Mojtaba Dynamic Design Principles of a Thrust Stand and Methods of Improving Frequency Response [Volume 2, Issue 1, 2008]
  • Heydari, Mojtaba Vibration Analysis and Design of Dynamic Absorber in a Vertical Drilling Machine [Volume 2, Issue 2, 2009]
  • Heydari, Mojtaba Analytical Solution and Simulation of Flexible Joint in Thrust Vector Control System under Bending [Volume 2, Issue 2, 2009]
  • Heydari, Vahid Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Heydari Beni, Mohsen Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Heydari Beni, Mohsen Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates [Volume 14, Issue 1, 2021, Pages 115-128]
  • Heydari Beni, Mohsen Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Heydari Beni, Mohsen Numerical and experimental static bending analysis of composite sandwich panels with grid-stiffened cores before and after transverse impact loading [(Articles in Press)]
  • Heydari Beni, Mohsen Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods [(Articles in Press)]
  • Heydari Beni, Mohsen Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load [(Articles in Press)]
  • Heydari Vini, M. A New Rolling Pressure Model for An Actual Reversing Cold Rolling Strip Mill [Volume 8, Issue 2, 2015, Pages 73-80]
  • Heydari Vini, M. Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution [Volume 10, Issue 4, 2017, Pages 91-98]
  • Heydari Vini, Mohammad Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding [Volume 9, Issue 4, 2016, Pages 13-22]
  • Hojjati Najafabadi, A. Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects [Volume 10, Issue 4, 2017, Pages 37-44]
  • HojjatKashani, Ata Experimental Examination of Intact and CFRP Retrofitted RC Beams under Monotonic and High Cycle Fatigue Loadings [Volume 6, Issue 3, 2013]
  • Homaei, Hadi Faults diagnosis of a girth gear using discrete wavelet transform and artificial neural networks [Volume 7, Issue 3, 2014]
  • Homami, Rasool Mokhtari Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Homayon Sadeghi, Morteza Theoretical and Experimental Study on Vibration of Cracked Shafts Using Order Analysis [Volume 7, Issue 2, 2014]
  • Homayon Sadeghi, Morteza Vibration based Assessment of Tool Wear in Hard Turning using Wavelet Packet Transform and Neural Networks [Volume 12, Issue 2, 2019, Pages 17-26]
  • Homayoun Sadeghi, Morteza Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • Honarpishe, Mahmoud Numerical Study of Effective Parameters on Cold Rolling of Tri-layers Al/St/Al and Cu/Al/Cu [Volume 3, Issue 1, 2009]
  • Honarvar, Farhang Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Hooshmand, Mehdi The Case Examination of Detection of Structural Damages on a Plate using Wavelet Transform [Volume 13, Issue 2, 2020, Pages 91-97]
  • Hoseini, Rouhollah Investigation into the Importance of Pre-Design Procedure in Vibration Absorbers Installations [Volume 4, Issue 1, 2010]
  • Hoseinipour, Sayed Jamal Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die [Volume 1, Issue 2, 2008]
  • Hoseini Sarvari, Sayed Masoud Effects of Cooling Air Direction and Velocity on a Branwheat Biscuit’s Temperature in the Cooling Line of Razavi Food Industries Company [Volume 2, Issue 4, 2009]
  • Hoseinpour Gollo, Mohammad The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91 [Volume 12, Issue 4, 2019, Pages 9-16]
  • Hoseinzadeh, Maryam Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [Volume 11, Issue 3, 2018, Pages 55-61]
  • Hoseinzadeh, Morteza Feasibility study on aluminum alloys and A441 AISI steel joints by friction stir welding [Volume 7, Issue 4, 2014]
  • Hoshiar, A. K. Developing a control strategy for AFM nano- micro manipulation [Volume 8, Issue 2, 2015, Pages 11-16]
  • Hosseingholi Pourasl, H. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Hosseini, MirAmin Kinematic Synthesis of a Novel Parallel Cable Robot as Artificial Leg [Volume 9, Issue 3, 2016, Pages 1-10]
  • Hosseini, Mir Amin Machine Tool Design Optimization of High Resolution Parallel Hexapod in Cartesian Workspace [Volume 4, Issue 3, 2011]
  • Hosseini, Mir Amin Kinematic Analysis of a Novel 3-CRS/PU Parallel Manipulator [Volume 5, Issue 5, 2012]
  • Hosseini, Rouhollah Study of the Resonant Frequency of Unimorph Triangular V-shaped Piezoelectric Cantilever Energy Harvester [Volume 8, Issue 4, 2015]
  • Hosseini Harat, Seyyed Mohammad Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Hosseinipour, Seyed Jamal Impact of Loading Rate in Hot Tube Gas Forming of AA6063 [Volume 12, Issue 1, 2019, Pages 59-66]
  • Hosseinzadeh, Ali Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]
  • Hossein zadeh, Ali Investigation of The Effect of Notch Tip Radius on Fracture Energy of Charpy in 7075 Aluminium Alloy [Volume 13, Issue 2, 2020, Pages 65-72]
  • Hossienzadeh, Morteza Effects of friction stir welding tool plunge depth on microstructure and texture evolution of AA1100 to A441 AISI joint [Volume 9, Issue 1, 2016]

I

  • Imam, A. Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method [Volume 10, Issue 3, 2017, Pages 41-48]
  • Imam, Ali Buckling analysis of cracked columns by XFEM [Volume 9, Issue 1, 2016]
  • Imam, Ali Preparation of Nitrogen-Doped Graphene Aerogel/Epoxy Nanocomposites and Experimental Study of Mechanical Properties [Volume 13, Issue 4, 2020, Pages 49-55]
  • Imam, Ali Evaluating the effect of the second invariant of deformation tensor in the axial and azimuthal shear deformations [(Articles in Press)]
  • Imani, Misagh Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Izgi, Batuhan Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study [Volume 14, Issue 2, 2021, Pages 123-130]

J

  • J., Praveen Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography [Volume 9, Issue 3, 2016, Pages 103-113]
  • Jabbari, A. H. Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]
  • Jafari, AliAsghar Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates [Volume 5, Issue 5, 2012]
  • Jafari, Saeed Taylor-Couette Flow Instabilities in Journal Bearings [Volume 4, Issue 1, 2010]
  • Jafarian, Farshid Thermal Loads and Surface Quality Evaluation in Machining of Hardened Die Steel under Dry and Cryogenic Machining [Volume 13, Issue 1, 2020, Pages 83-90]
  • Jafarian, Mehdi Investigation of Machining Parameters in Wire Electrical Discharge Machining (WEDM) on the Surface Roughness & Cutting Speed of Tungsten Carbide [Volume 2, Issue 2, 2009]
  • Jafarian, Mojtaba Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Jafarian Jam, N. Flow Study of Wood Plastic Composite Through a Circular Die in an Extrusion Process [Volume 10, Issue 2, 2017, Pages 37-47]
  • Jafari farsani, Marzieh Numerical Simulation of Turbulent Nano-fluidFlow in a Circular Elbow [Volume 9, Issue 1, 2016]
  • Jafari Fesharaki, Javad Reducing stress concentration factor around a hole on a plate by piezoelectric patch [Volume 6, Issue 4, 2013]
  • Jafari Nedoushan, Reza Effect of Mandrel, Its Clearance and Pressure Die on Tube Bending Process via Rotary Draw Bending Method [Volume 5, Issue 5, 2012]
  • Jafari Nedoushan, Reza A New Approach for Determining the Optimum Pressure–Time Diagram in Superplastic Forming Process [Volume 6, Issue 3, 2013]
  • Jagtap, K. A. Investigations on Surface Integrity and Electrochemical Behavior of Machined Co-Cr-Mo Bio-implant Alloy [Volume 9, Issue 4, 2016, Pages 51-58]
  • Jagtap, Ketan Experimental Investigation on the Influence of Cutting Parameters on Surface Quality obtained in SPDT of PMMA [Volume 7, Issue 2, 2014]
  • Jahanbakhshi, Akram Numerical Study on Forced Convection of Slip Flow in A Microchannel with Smooth and Sinusoidal Walls [Volume 14, Issue 4, 2021, Pages 59-71]
  • Jahanfarnia, Gholamreza Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor [Volume 11, Issue 2, 2018, Pages 39-45]
  • Jahangiri, Mehdi Investigation of Mechanical Property and Microstructure of Nanocomposite AZ31/SiC Fabricated by Friction Stir Process [Volume 9, Issue 2, 2016, Pages 27-34]
  • Jahangiri, Mehdi Effect of Non-Newtonian Models on Blood Flow in Artery with Different Consecutive Stenosis [Volume 11, Issue 1, 2018, Pages 79-86]
  • Jahani, Mahsa Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [Volume 8, Issue 3, 2015]
  • Jahanshahi, H. Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [Volume 8, Issue 2, 2015, Pages 1-9]
  • Jahedi, R. Multi layered finite element analysis of graded coatings in frictional rolling contact [Volume 8, Issue 1, 2015, Pages 1-12]
  • Jahedi Amlashi, Hamid An Experimental Study of Energy Charging and Discharging in a PCM Thermal Storage [Volume 6, Issue 2, 2013]
  • Jalali, Hasan Modal Coefficients Identification Using Wavelet Transform [Volume 4, Issue 3, 2011]
  • Jalali, M. Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]
  • Jalali Azizpour, M. Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature [Volume 10, Issue 2, 2017, Pages 109-120]
  • Jalali Azizpour, Mehdi Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness) [Volume 11, Issue 2, 2018, Pages 131-139]
  • Jalali Azizpour, Mehdi Evaluating the Effects of Overload and Welding Residual Stress in Fatigue Crack Propagation [Volume 12, Issue 1, 2019, Pages 85-93]
  • Jalalizadeh, Mostafa Effect of TID-dressing on Fatigue Life Stress Concentration Factor in St37-2Butt Weldments [Volume 12, Issue 1, 2019, Pages 115-123]
  • Jalili, Mohamad Mahdi Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Jalili, Mohammad Mahdi Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]
  • Jam, J. E. Analytical and Numerical Buckling Analysis of Carbon Nanotube Reinforced Annular Composite Plates [Volume 7, Issue 2, 2014]
  • Jamadi, Farnaz Forecasting Operational Parameters of a Solar Space Heating System using a Novel Multistage Artificial Neural Network [Volume 11, Issue 2, 2018, Pages 75-84]
  • Jamali, Behnam Forecasting Operational Parameters of a Solar Space Heating System using a Novel Multistage Artificial Neural Network [Volume 11, Issue 2, 2018, Pages 75-84]
  • Jamali, Jalil Geometric Optimization of APCs anti Explosion Blades using LS-DYNA Finite Element Software [Volume 13, Issue 4, 2020, Pages 79-87]
  • Jamshidi, Ehsan The Inverse Method of Damage Detection using Swarm Life Cycle Algorithm (SLCA) via Modal Parameters in Beam Like Structures [Volume 14, Issue 2, 2021, Pages 1-14]
  • Jamshidi Aval, Hamed Study on heat generation and distribution during friction stir welding of AA1100 aluminum alloy [Volume 8, Issue 3, 2015]
  • Jamshidi Aval, Hamed Impact of Loading Rate in Hot Tube Gas Forming of AA6063 [Volume 12, Issue 1, 2019, Pages 59-66]
  • Janaswamy, Purushottam Karthik Design and Optimization of Metal Matrix Composite (MMC’S) Spur Gear [Volume 9, Issue 3, 2016, Pages 49-56]
  • Janati Far, R. Two - dimensional modeling of a two - layer porous burner for household applications under the influence of a radiation field [Volume 6, Issue 1, 2013]
  • Janbakhsh, Milad Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]
  • Janbakhsh, Milad A Practical Approach to Analysis of Hydromechanical Deep Drawing of Superalloy Sheet Metals by Using Finite Element Method [Volume 6, Issue 1, 2013]
  • Janbakhsh, Milad Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]
  • Jandaghian, AliAkbar Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates [Volume 5, Issue 5, 2012]
  • Javabvar, Darush Experimental and Numerical Analysis of Bevel Gear Forge Method and Comparing it with Machining Method [Volume 2, Issue 3, 2009]
  • Javadi, Mehrdad Experimental Study of the Effect of Variable Pitch in Indexable Cutting Tool on AISI4140 Steel Surface Finish in Milling [Volume 13, Issue 3, 2020, Pages 99-105]
  • Javadifar, Faridodin Extracting Lateral Transfer Function of a Remotely Piloted Helicopter by System Identification Method Using 3-DOF Test Stand [Volume 4, Issue 2, 2011]
  • Javadinejad, Hamid Reza Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Javaherdeh, K. Exergy Analysis of a Trigeneration System Driven by Aninternal Combustion Engine with Asteam Ejector Refrigeration System [Volume 5, Issue 3, 2012]
  • Javam, N. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Javanroodi, F. Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum [Volume 5, Issue 2, 2012]
  • Jawahar, N. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]
  • Ji, Tingwei Approximate model and clonal selection algorithm based optimization of heating channels for variotherm injection mold [Volume 6, Issue 4, 2013]
  • Joudaki, Jalal Fabrication of a Complicated Specimen with Two Point Incremental Forming Process [Volume 12, Issue 4, 2019, Pages 83-88]
  • Jouzdani, Saeed Evaluation of S/N Diagram in Welded Joints Based on Different Fatigue Failure Criteria [Volume 13, Issue 3, 2020, Pages 67-74]

K

  • Kabir, Mohammad Zaman Experimental Examination of Intact and CFRP Retrofitted RC Beams under Monotonic and High Cycle Fatigue Loadings [Volume 6, Issue 3, 2013]
  • Kadkhodayan, Mehran An Analytical Study on Elastic Flange Wrinkling of Circular Plates in Deep Drawing Process [Volume 3, Issue 2, 2010]
  • Kafash Houshyar, Ali Modeling and Simulation of Nano Structures with Using Molecular Dynamics [Volume 2, Issue 3, 2009]
  • Kairav Patel, Neelsai Sharma Effect of Processing Parameters on Properties of Friction Stir Welded Joints of Aluminium Alloys AA7075- T651 and AA6061-T6 [Volume 10, Issue 2, 2017, Pages 93-99]
  • Kakavand, Farshad Vibration Analysis of Different Types of Porous FG Circular Sandwich Plates [Volume 12, Issue 3, 2019, Pages 63-75]
  • Kakavand, Farshad Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Kalaki, Ali Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method [Volume 12, Issue 1, 2019, Pages 41-50]
  • Kalami, Hamed Mold Less Casting, a New Method for Droplet Based Part Manufacturing [Volume 2, Issue 1, 2008]
  • Kalantar Neyestanaki, Mehrdad A Simple Method for Designing a Duct for a Multi-Component Ducted Propulsion System [Volume 10, Issue 3, 2017, Pages 57-64]
  • Kamkari, Babak A hybrid approach based on the genetic algorithm and Monte Carlo method to optimize the 3-D radiant furnaces [Volume 8, Issue 3, 2015]
  • Karami Fath, Iman Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Karami Khorramabadi, Mahdi Free Vibration of Functionally Graded Epoxy/Clay Nanocomposite Beams based on the First Order Shear Deformation Theory [Volume 12, Issue 2, 2019, Pages 45-51]
  • Karami Khorramabadi, Mahdi Theoretical Predictions on Mechanical Properties of Functionally Graded Epoxy/Clay Nanocomposites [Volume 13, Issue 1, 2020, Pages 31-37]
  • Karamooz-Ravari, M. R. Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method [Volume 10, Issue 4, 2017, Pages 85-90]
  • Karbaschi, Kasara Numerical Study of Increasing Error Order in Finite Difference Method Used for Analyzing the Rectangular Isotropic Plate's Vibration Behavior [Volume 1, Issue 3, 2008]
  • Karbaschi, Kasara On Using the Fourth Order Finite Difference Method in Studying Orthotropic Rectangular Plate's Vibration Behavior [Volume 1, Issue 4, 2008]
  • Karbaschi, Kasra Numerical Analysis of Plate’s Vibration Behavior with Non-linear Edge under Various Boundary Conditions [Volume 1, Issue 2, 2008]
  • Karbaschi, Kasra A New Method for Biomodelling and Rapid Prototyping of Human's Hard Tissues as Substituting Prostheses [Volume 6, Issue 3, 2013]
  • Kargarnovin, MohamadHosein Numerical Study of Increasing Error Order in Finite Difference Method Used for Analyzing the Rectangular Isotropic Plate's Vibration Behavior [Volume 1, Issue 3, 2008]
  • Kargarnovin, MohamadHosein On Using the Fourth Order Finite Difference Method in Studying Orthotropic Rectangular Plate's Vibration Behavior [Volume 1, Issue 4, 2008]
  • Kargar Razi, Maryam Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Kargar Sichani, Samaneh Investigation of Variance of Roller Burnishing Parameters on Surface Quality by Taguchi Approach [Volume 6, Issue 3, 2013]
  • Karimi, AliAkbar Analytical Solution and Simulation of Flexible Joint in Thrust Vector Control System under Bending [Volume 2, Issue 2, 2009]
  • Karimi, Mohammad Ali Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Karimian, S.M.H. Two Dimensional Simulation of Laminar Flow Around Two Bodies in Relative Motion [Volume 5, Issue 3, 2012]
  • KarimiHaghighi, Habibollah Stability of Shear-Thickening and Shear-Thinning Fluids in Narrow Gap between Rotating Cylinders [Volume 4, Issue 2, 2011]
  • Karimipour, Arash Laminar Mixed Convection Flow in a Shallow Two-Sided Lid-Driven Rectangular Enclosure [Volume 1, Issue 2, 2008]
  • Karthic, M. Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling [Volume 11, Issue 2, 2018, Pages 27-37]
  • Kasaei, Mohammad Mehdi Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method [Volume 14, Issue 4, 2021, Pages 19-25]
  • Kasiri- Asgarani, Masoud Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4 [Volume 9, Issue 2, 2016, Pages 93-100]
  • Katiraei, Shahin Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Kazemi, Amir The Finite Element Method and Genetic Algorithm Approaches on Shape Optimization of Prosthesis According to Fatigue Behavior [Volume 3, Issue 3, 2010]
  • Kazemi, MohamadTaghi Elasto-plastic Analysis of Thick Walled Tanks Subjected to Internal Pressure [Volume 3, Issue 1, 2009]
  • Kazemi, Mohammad Hosein Velocity Control of Nonlinear Unmanned Rotorcraft using Polytopic Modelling and State Feedback Control [Volume 13, Issue 3, 2020, Pages 33-49]
  • Kazemi, Mohammad Hosein Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Kazemi, Reza Optimal control with adaptive weighting coefficients for integrated vehicle dynamics control [Volume 7, Issue 1, 2014]
  • Kazemi, Reza Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]
  • Kazemian, Amir Hosein Analysis of time–varying mesh stiffness for the planetary gear system with analytical and finite element methods [(Articles in Press)]
  • Kazemian, Amir Hossein Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Kazeminia, Sarang Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Keimanesh, Reza The Effects of Local Variation in Thermal Conductivity on Heat Transfer of a Micropolar Fluid Flow Over a Porous Sheet [Volume 9, Issue 2, 2016, Pages 19-25]
  • Keshavarz, Arash Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Keshavarz Alamdari, E. Experimental Study of the Effect of Impeller Geometrical Parameters on Fluid Hydrodynamics in Copper Solvent Extraction Mixer [Volume 10, Issue 4, 2017, Pages 21-25]
  • Keshtkar, MohamadMehdi Heat Transfer Characteristics and Optimization of a Porous Radiant Air Heater, Using DOM, under the Influence of 2-D Rectangular Radiative Field [Volume 3, Issue 4, 2010]
  • Keshtkar, MohamadMehdi Numerical Investigation on Thermal Performance of a Composite Porous Radiant Burner under the Influence of a 2-D Radiation Field [Volume 5, Issue 1, 2011]
  • Keshtkar, MohamadMehdi Numerical Simulation of Fluid Flow in Random Granular Porous Media using Lattice Boltzmann Method [Volume 9, Issue 3, 2016, Pages 31-40]
  • Keshtkar, MohamadMehdi Numerical Study of Non-Gray Radiative Heat Transfer in a T-shaped Furnace [Volume 13, Issue 1, 2020, Pages 39-49]
  • Keshtksr, Mohammad Mehdi Two - dimensional modeling of a two - layer porous burner for household applications under the influence of a radiation field [Volume 6, Issue 1, 2013]
  • Khademi, Vahid Ultrasonic Assisted Drilling of Bone [Volume 1, Issue 4, 2008]
  • Khademizadeh, Hasan Nonlinear vibration and instability of embedded viscose-fluid-conveying pipes using DQM [Volume 7, Issue 1, 2014]
  • Khaki, Sajjad Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method [Volume 12, Issue 3, 2019, Pages 25-33]
  • Khakpash, Mohammad Saeed Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Khalid Hussain, Ahmed EVALUATION OF FATIGUE LIFE OF FRICTION STIR WELDED 7075-T651 ALUMINUM ALLOY JOINTS [Volume 6, Issue 1, 2013]
  • Khalili, HamidReza Simulation and Experimental Study of Modern Fiber Metal Laminate Panels Used in Auto Body to Reduce Vehicle Weight [Volume 4, Issue 3, 2011]
  • Khalili, Seyyed Mohammad Reza The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]
  • Khalili, S. Mohammad Reza Aging Influence on Charpy Impact Behavior of Basalt Fiber Reinforced Epoxy Composites [Volume 6, Issue 2, 2013]
  • Khalili, S. Mohammad Reza Free Vibrations of Functionally Graded Circular Cylindrical Shells under Internal Pressure [Volume 6, Issue 4, 2013]
  • Khalili, S.M.R. Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Khalilorahmani, Omid An Investigation on Effective Parameters in Cylindrical Surface Finishing of Hot Resistance Stainless Steel AISI 321 by Magnetic Abrasive Finishing (MAF) Method [Volume 8, Issue 4, 2015]
  • Khalkhali, A. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Khalkhali, Abolfazl Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Khalkhali, Abolfazl Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Khan, Zahid A. Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Khandan, Amirsalar Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Khani, Ali Multi-Stage Optimum Design for Composite Pressure Vessels [Volume 1, Issue 1, 2007]
  • Khayat, M. Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Khazraiyan, N. Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [Volume 8, Issue 2, 2015, Pages 81-90]
  • Kheirollahi, Hossein Design and Analysis of a New Dental Implant using Finite Element Method [Volume 6, Issue 3, 2013]
  • Kheirollahi, Hossein Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Kheradmandan, Hasan The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Khodadad, Mahmoud Application of the Inverse Heat Conduction Method in Identifying a Cavity Inside Materials [Volume 2, Issue 2, 2009]
  • Khodadad, Mahmud Investigating the Effect of Different Boundary Conditions on the Identification of a Cavity Inside Solid Bodies [Volume 4, Issue 4, 2011]
  • Khodaei, Mohammad Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation [Volume 10, Issue 1, 2017, Pages 57-74]
  • Khodsetan, M. Microstructure and Mechanical Properties of AZ91 Magnesium Cup Processed by a Combined Backward Extrusion and Constrained Ironing Method [Volume 10, Issue 1, 2017, Pages 23-30]
  • Khodsetan, Mohsen Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy [Volume 9, Issue 3, 2016, Pages 11-18]
  • Khoogar, Ahmad Reza A Novel Study of Penetration ‎into Concrete Targets by Ogive ‎Nose Projectiles [Volume 6, Issue 3, 2013]
  • Khoogar, Ahmad Reza Reducing Image Size and Noise Removal in Fast Object Detection using Wavelet Transform Neural Network [Volume 13, Issue 2, 2020, Pages 13-21]
  • Khoogar, Ahmad Reza Modeling and Simulation of 6DOF robot Manipulators with Tactile Position-Force control [(Articles in Press)]
  • Khoogar, A. R. Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [Volume 8, Issue 1, 2015, Pages 67-75]
  • Khorram, Ali An Experimental Investigation of the Effects of Fiber Laser Percussion Drilling: Influence of Process Parameters [Volume 9, Issue 4, 2016, Pages 7-12]
  • Khorram, Ali An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Khorram, Amir Vehicle Interior Structure Borne Noise Calculation Using Finite Element Method [Volume 2, Issue 4, 2009]
  • Khorram, Amir Natural Convection in an Inclined Partitioned Enclosure with Local Heat Source [Volume 3, Issue 2, 2010]
  • Khorshidnia, Hossein Investigating the Tribological Behavior of Diesel-biodiesel Blends with Nanoparticle Additives under Short-term Tests [Volume 12, Issue 3, 2019, Pages 19-24]
  • Khoshanjam, Ali Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM) [Volume 14, Issue 3, 2021, Pages 17-24]
  • Khoshnam, Farhad Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Khoshnevis, A.B. Experimental study of the characteristics of the wake and drag coefficient changes of a car model in unsteady flow [Volume 8, Issue 1, 2015, Pages 55-65]
  • Khoshnevis, A.B. Experimental Investigation of the Flow Control of Wake Cylinder by a Plate with Different Geometrical Ends [Volume 9, Issue 2, 2016, Pages 1-10]
  • Khosravi, Arezoo Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Khosravi, Mohamadreza Vibration Analysis and Sensitivity Analysis of Semi-Submerged Multilayer Piezoelectric Microcantilever [Volume 14, Issue 4, 2021, Pages 11-18]
  • Khougar, AhmadReza Aerodynamic Parameter Corrections for Surface to Air Missiles Using Tail Flap Vibration Feedback [Volume 2, Issue 1, 2008]
  • Kiani, Amir Hossein A Novel Approach for Optimization of Vehicle Noise Insulators [Volume 13, Issue 3, 2020, Pages 9-20]
  • Kogani, Mohsen Numerical Analysis of Rectangular Isotropic and Orthotropic Thin Plates Based on the Radial Point Interpolation Method (RPIM) [Volume 3, Issue 3, 2010]
  • Kolahdooz, Amin Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method [Volume 12, Issue 3, 2019, Pages 25-33]
  • Kolahdoozan, M. Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator [Volume 10, Issue 2, 2017, Pages 71-81]
  • Kolahdoozan, Mojtaba Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]
  • Kolasangiani, Kamal Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • KONDAPALLI, SIVAPRASAD Application of Grey Relational Analysis for Optimizing Weld pool geometry parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L stainless steel sheets [Volume 6, Issue 1, 2013]
  • Koofigar, HamidReza Adaptive Control of Chaotic Nonlinear Gyros with Uncertain Coefficients of Dynamical Model [Volume 4, Issue 2, 2011]
  • Koohi, R. Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [Volume 8, Issue 1, 2015, Pages 45-54]
  • Koohi, Reza Quick and Effective Modal and Flutter Analyses for Low Aspect Ratio Wings [Volume 13, Issue 4, 2020, Pages 89-97]
  • Korayem, A. H. Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments [Volume 12, Issue 1, 2019, Pages 23-29]
  • Korayem, M. H Sliding Mode Control of AFM in Cantact Mode during Manipulation of Nano-particle [Volume 6, Issue 4, 2013]
  • Korayem, M. H. Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments [Volume 12, Issue 1, 2019, Pages 23-29]
  • Korayem, M.H. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [Volume 8, Issue 2, 2015, Pages 37-46]
  • Korayem, Moharram Habibnejad Longitudinal and Lateral Vibration Analysis of Cables in a Cable Robot Using Finite Element Method [Volume 10, Issue 1, 2017, Pages 1-11]
  • Kordjamshidi, Alireza Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Kosari, A. Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [Volume 8, Issue 2, 2015, Pages 1-9]
  • Kournavand, Shahriyar 2D Model of Floor Surface Roughness in Micro Milling Operation [Volume 3, Issue 3, 2010]
  • Krishna, M.V.S. Murali Potential of a Low Heat Rejection Diesel Engine with Renewable Fuels [Volume 5, Issue 3, 2012]
  • Kumar, Surinder Predictive modeling of surface roughness and material removal rate in turning of UD-GFRP composites using carbide (K10) tool [Volume 6, Issue 2, 2013]
  • Kumar, Surinder Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics [Volume 10, Issue 3, 2017, Pages 19-30]
  • Kumarci, F. Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [Volume 8, Issue 1, 2015, Pages 67-75]
  • Kunjan, Chockalingam Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography [Volume 9, Issue 3, 2016, Pages 103-113]

L

  • Lari, Khosro Numerical Study of Coupled Non-Gray Radiation and Separation Convection Flow in a Duct using FSK Method [Volume 9, Issue 4, 2016, Pages 23-38]
  • Lashgari, Payman Exergy Analysis and Optimization of Combined Rankin Power and Ejector Refrigeration Cycle [Volume 3, Issue 4, 2010]
  • Li, Xiping Approximate model and clonal selection algorithm based optimization of heating channels for variotherm injection mold [Volume 6, Issue 4, 2013]
  • Liaghat, Gh. Non Destructive Evaluation of Glass-Epoxy Composite using Impact-echo Method [Volume 10, Issue 1, 2017, Pages 85-91]
  • Liaghat, Gh. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Lin, Dong Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [Volume 11, Issue 4, 2018, Pages 1-12]
  • Liravinia, B. Exergy Analysis of a Trigeneration System Driven by Aninternal Combustion Engine with Asteam Ejector Refrigeration System [Volume 5, Issue 3, 2012]
  • Liu, Gabriel Developing a 3D Multi-Body Model of the Scoliotic Spine with Lateral Bending Motion for Comparison of Ribcage Flexibility [Volume 6, Issue 1, 2013]
  • Loghmanian, S. M. R. Application of Different Hill’s Yield Criteria to Predict Limit Strains for Aerospace Titanium and Aluminum Sheet Alloys [Volume 7, Issue 1, 2014]
  • Lohmousavi, Mohsen Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die [Volume 1, Issue 2, 2008]
  • Lohmousavi, Mohsen Finite Element Simulation of C.V. Joint Forging of Prid Using Arbitrary Lagrangian-Eulerian Method [Volume 3, Issue 4, 2010]
  • Lohmousavi, Mohsen Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels [Volume 8, Issue 4, 2015]
  • Loh-Mousavi, Mohsen Incremental Forming of Polymeric Sheet Printed by Fused Deposition Modeling [Volume 12, Issue 3, 2019, Pages 85-91]
  • Lohrasbi, Ali Numerical Study on Propagation of Flame in Laminar Pre-Mixed Combustion [Volume 3, Issue 4, 2010]
  • Lotfi, Afshin Optimization of AZ61 Mg Alloy Resistance Spot Welding using Response Surface Method [Volume 12, Issue 3, 2019, Pages 35-41]
  • Lotfi, AliAkbar The Effect of Operational Cutting Parameters in the Wire Electro Discharge Machining (WEDM) on Micro Hardness of Alloy Surface Layer [Volume 2, Issue 4, 2009]
  • Lotfi, Amir Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [Volume 11, Issue 1, 2018, Pages 61-69]
  • Lotfi neyestanak, AliAkbar Investigation of the Effect of V-Clamp Band Design Parameters on the Bending and Axial Stiffness of the Flanged Joints [Volume 12, Issue 4, 2019, Pages 17-23]

M

  • M., Karthic Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography [Volume 9, Issue 3, 2016, Pages 103-113]
  • Maarefdoust, M. Proportional-derivative Fuzzy Control of Conjugated Polymer Actuators [Volume 5, Issue 2, 2012]
  • Madoliat, Reza Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis [Volume 12, Issue 1, 2019, Pages 51-58]
  • Maghmoumi, Yashar Numerical Analyses of Steady Non-Newtonian Flow over Flat Plate on Intermediate Reynolds Numbers by Finite Volume Method [Volume 1, Issue 4, 2008]
  • Maghrebi, Mohamad Javad Finite Volume-Lattice Boltzmann Modeling of Viscous Flows [Volume 4, Issue 2, 2011]
  • Mahboubkhah, M. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Mahboubkhah, Mehran Workspace Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 10, Issue 4, 2017, Pages 1-6]
  • Mahboubkhah, Mehran Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • Mahdavi, F. Two Dimensional Simulation of Laminar Flow Around Two Bodies in Relative Motion [Volume 5, Issue 3, 2012]
  • Mahdavinejad, R. A. Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology [Volume 8, Issue 1, 2015, Pages 13-23]
  • Mahdieh, Mohammad Sajjad Investigation of Variance of Roller Burnishing Parameters on Surface Quality by Taguchi Approach [Volume 6, Issue 3, 2013]
  • Mahdieh, Mohammad Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Mahdieh, Mohammad Sajjad Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process [Volume 13, Issue 3, 2020, Pages 75-82]
  • Mahdikhani, Behrouz Experimental Study of the Effect of Variable Pitch in Indexable Cutting Tool on AISI4140 Steel Surface Finish in Milling [Volume 13, Issue 3, 2020, Pages 99-105]
  • Mahdipour Jalilian, Maziar The Effect of Process Parameters and Tool Geometrical Parameters on the Tool Peak Temperature in Machining Process [Volume 14, Issue 3, 2021, Pages 75-83]
  • Mahjoub, Shoeib A hybrid approach based on the genetic algorithm and Monte Carlo method to optimize the 3-D radiant furnaces [Volume 8, Issue 3, 2015]
  • MahjoubMoghadas, Saeed Estimation of Thrust Stand Structure Fatigue Life Under Solid Motors Random Vibrations Effects [Volume 1, Issue 4, 2008]
  • Mahjoub Moghadas, Saeed Shock Suspension System Review and Analysis of Airplane During Landing [Volume 1, Issue 4, 2008]
  • Mahjoub Moghadas, Saied Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]
  • Mahmoodabadi, Mohammadjavad Pareto Optimal Design of Passive and Active Vehicle Suspension Models [Volume 9, Issue 4, 2016, Pages 59-73]
  • Mahmoodabadi, Mohammadjavad Optimal Robust Design of Sliding-mode Control Based on Multi-Objective Particle Swarm Optimization for Chaotic Uncertain Problems [Volume 10, Issue 3, 2017, Pages 115-126]
  • Mahmoodabadi, Mohammadjavad Pareto Optimum Design of Heat Exchangers based on the Imperialist Competitive Algorithm: A Case Study [Volume 11, Issue 3, 2018, Pages 75-82]
  • Mahmoodabadi, Mohammadjavad An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Mahmoodabadi, MohammadJavad Analysis of Two Dimensional Steady-State Heat Conduction Problems by MLPG Method [Volume 4, Issue 4, 2011]
  • Mahmoodi, Masoud Experimental and Numerical Study of Through Thickness Residual Stresses Distribution in Sheet Metals Produced by ECAR [Volume 5, Issue 4, 2012]
  • Mahmoudi, Mehdi Investigation of Process Parameters, Gate Position and its Shape Effect on Dimensional Accuracy of Injected Plastic Part [Volume 2, Issue 4, 2009]
  • Mahmoudpour, Ebrahim Nonlinear Vibration Analysis of FG Nano-Beams in Thermal Environment and Resting on Nonlinear Foundation based on Nonlocal and Strain-Inertia Gradient Theory [Volume 11, Issue 3, 2018, Pages 11-24]
  • Maleki, A. Impact of Energy Dampers in Improvement of Impulsive Response of Double Layer Grids Space Structures [Volume 10, Issue 4, 2017, Pages 27-35]
  • Maleki Moghadam Abyaneh, P. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [Volume 8, Issue 2, 2015, Pages 37-46]
  • Malekzadeh Fard, keramat Effect of Important Physical and Geometrical Parameters on the Dynamic Response of Thick Composite Plates with Smart Attached Mass [Volume 12, Issue 4, 2019, Pages 67-81]
  • Malpotra, Saurabh Data-based Probe for Bearing Balls using Design Expert with Biodegradable Media [Volume 12, Issue 3, 2019, Pages 43-50]
  • Mamouri, Amir Reza An investigation of Reynolds number effect on the aerodynamics of bluff body with sharp edges [Volume 8, Issue 3, 2015]
  • Mamouri, AmirReza The Effect of Packing on Temperature and Pressure Drop in Mechanical Counter Flow Cooling Tower [Volume 4, Issue 3, 2011]
  • Mamouri, AmirReza Experimental Investigation of the Flow Control of Wake Cylinder by a Plate with Different Geometrical Ends [Volume 9, Issue 2, 2016, Pages 1-10]
  • Mamouri, AmirReza Experimental Investigation of the Flow Control of Wake Cylinder by a Plate with Different Geometrical Ends [Volume 9, Issue 2, 2016, Pages 1-10]
  • Manafi, B. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [Volume 8, Issue 2, 2015, Pages 37-46]
  • Mankanteswar Rao, Chinthada Analysis of Stresses in Tapered Rectangular Utility Pole [Volume 11, Issue 1, 2018, Pages 15-25]
  • Manouchehrifard, Afshin The effect of carbon nanotubes on buckling analysis of embedded oil pipes resting on elastic medium [Volume 7, Issue 2, 2014]
  • Maracy, AbdolAli Investigation of Process Parameters on Hot Ring Rolling by Coupled Thermo-Mechanical 3D-FEA [Volume 4, Issue 4, 2011]
  • Maraki, Mohammad Reza Investigation of The Effect of Notch Tip Radius on Fracture Energy of Charpy in 7075 Aluminium Alloy [Volume 13, Issue 2, 2020, Pages 65-72]
  • Marashi, Pirouz Effect of Expulsion on Energy Absorption Capability of Low Carbon Steel Resistance Spot Welds [Volume 4, Issue 2, 2011]
  • Mardkhri, Farshid Study of Nucleation and Meta Stable Phenomena’s and Applications [Volume 1, Issue 1, 2007]
  • Maroufi, Arman Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method [Volume 14, Issue 4, 2021, Pages 19-25]
  • Marzbanrad, Javad Chaotic Motion and its Control for a non-Planar non-Linear Cantilever Beam with Parametric Excitation [Volume 1, Issue 1, 2007]
  • Mashhadi, Hesamaddin Analytical and Numerical Determination of Residual Stresses in Thick Composite Laminated Plates [Volume 4, Issue 3, 2011]
  • Mashhadi, M. M. Severe Plastic Deformation of Nanostructured Cu-30%Zn Tubes at Increased Temperatures [Volume 9, Issue 3, 2016, Pages 85-91]
  • Mashhadi Keshtiban, Peyman Recycling of Magnesium Machining Chips via Shear Consolidation Processing [Volume 12, Issue 1, 2019, Pages 95-99]
  • Mashhadi Keshtiban, Peyman Optimal Process Parameters in ECMAP of Al−3% Mg Alloy Strips [Volume 13, Issue 1, 2020, Pages 69-81]
  • Masoumi, A. Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method [Volume 12, Issue 1, 2019, Pages 41-50]
  • Massah, Mehdi Finite Element Analysis of Self Destruction Mechanism in a Mechanical Controller [Volume 3, Issue 2, 2010]
  • Matin, R. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Mazdak, S. Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process [Volume 10, Issue 2, 2017, Pages 121-131]
  • Mazinan, Amir Hooshang Velocity Control of Nonlinear Unmanned Rotorcraft using Polytopic Modelling and State Feedback Control [Volume 13, Issue 3, 2020, Pages 33-49]
  • Mazinan, Amir Hooshang Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Meghdadi Isfahani, Amir Homayoon Efficiency Estimation of Olefin Furnaces in Order to Provide Methods for Increasing the Efficiency [Volume 12, Issue 3, 2019, Pages 51-62]
  • Mehdipoor, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Mehdipoor Omrani, Ali Reducing Image Size and Noise Removal in Fast Object Detection using Wavelet Transform Neural Network [Volume 13, Issue 2, 2020, Pages 13-21]
  • Mehrdad Shokrieh, Mahmoud Design and Weight Optimization of Pin Loaded Composite Plates [Volume 1, Issue 1, 2007]
  • Mehrdadshokriyeh, Mahmoud Mechanical Properties of Basalt/Epoxy Composites [Volume 2, Issue 1, 2008]
  • Memar, Mehdi Mechanical Properties of Basalt/Epoxy Composites [Volume 2, Issue 1, 2008]
  • Meshabadi, Ramin The Finite Element Method and Genetic Algorithm Approaches on Shape Optimization of Prosthesis According to Fatigue Behavior [Volume 3, Issue 3, 2010]
  • Miandoabchi, Elyar Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Mir, Farzad An investigation of Reynolds number effect on the aerodynamics of bluff body with sharp edges [Volume 8, Issue 3, 2015]
  • Mirahamadi, Amin Design and Manufacturing Electrochemical Jet Turning Machine and Investigation of its Effective Parameters [Volume 2, Issue 2, 2009]
  • Mirghasemi, MohamadHosein Study of Metallurgical Properties Effects and Effective Parameters on Fracture Bio-Medical Stainless Steel 316L of Human's Body [Volume 4, Issue 1, 2010]
  • Mirnia, MohamadJavad An Investigation in the Deformation Zone of the ECAE Process by the Upper Bound Theorem [Volume 2, Issue 3, 2009]
  • Mirone, Giuseppe Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Mirzababaie Mostofi, Tohid High-Velocity Compaction of Aluminum Powder by Gas Detonation Forming Technique [Volume 13, Issue 1, 2020, Pages 17-29]
  • Mirzaei, Jaber Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]
  • Mirzaii, Iman Investigation of water balance in water recovery of closed steam injection gas turbine cycles [Volume 6, Issue 3, 2013]
  • Mizanadl, MohamadMehdi Application of the Inverse Heat Conduction Method in Identifying a Cavity Inside Materials [Volume 2, Issue 2, 2009]
  • MizanAdl, Seyd Mohammad Mehdi Using the Bees Algorithm with the Boundary Elements Method to Solve the Inverse Problem of Transient Heat Conduction [Volume 5, Issue 2, 2012]
  • Moarefzadeh, Ali Finite Element Simulation of Plasma Arc Welding Process for Ferrite Stainless Steel [Volume 4, Issue 3, 2011]
  • Moarefzadeh, Ali Evaluating the Effects of Overload and Welding Residual Stress in Fatigue Crack Propagation [Volume 12, Issue 1, 2019, Pages 85-93]
  • Moarefzadeh, Ali Removing Residual Stress and Increasing Fatigue Life by Ultrasonic Method [Volume 14, Issue 3, 2021, Pages 35-43]
  • Moarefzadeh, Mohammad Reza Time-Dependent Reliability Analysis of Mechanical Structures using an Analytical Approach [Volume 10, Issue 3, 2017, Pages 105-113]
  • Moayyedi, Mohammad Kazem A Surrogate Reduced Order Free Vibration Model of Linear and Non-Linear Beams using Modified Modal Coefficients and HOSVD Approaches [Volume 11, Issue 4, 2018, Pages 61-71]
  • Moayyedian, Farzad An Analytical Study on Elastic Flange Wrinkling of Circular Plates in Deep Drawing Process [Volume 3, Issue 2, 2010]
  • Moazemi goudarzi, Ali Design an Artificial Foot using Series Elastic Actuator [Volume 7, Issue 3, 2014]
  • Mobasher, Ismaeil Buckling Analysis of Orthotropic Annular Graphene Sheet with Various Boundary Conditions in an Elastic Medium [Volume 13, Issue 2, 2020, Pages 73-90]
  • Mobli, Hosein The Main Parameters Assessment of Clod and Stone Separation from Potato Crop (Inclined Belt Type) in Potato Harvester [Volume 3, Issue 2, 2010]
  • Modanloo, V. Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods [Volume 10, Issue 2, 2017, Pages 101-108]
  • Modanloo, Vahid Multi-Objective Optimization of the Stamping of Titanium Bipolar Plates for Fuel Cell [Volume 12, Issue 4, 2019, Pages 1-8]
  • Moeinkhah, Hossein Design an Adaptive Sliding Mode Controller for a Class of Underactuated Systems [Volume 14, Issue 4, 2021, Pages 37-44]
  • Moghani, Yaser Investigation of Effects of Stress Relieving Parameters on Reduction of Austenitic Spring Free Length During Periodic Loading [Volume 2, Issue 3, 2009]
  • Moghani, Yaser Laboratory Investigation of Austenitic Stress Relieved Spring [Volume 2, Issue 4, 2009]
  • Moghimian, Mohamad Numerical Investigation of Heat Transfer in Circular Perforated Plates Exposed to Parallel Flow and Suction [Volume 1, Issue 3, 2008]
  • Mohades, Mohamad Ali A Novel Study of Penetration ‎into Concrete Targets by Ogive ‎Nose Projectiles [Volume 6, Issue 3, 2013]
  • Mohajerani, AliReza Free Vibration Analysis of S-FGM-Coated and S-FGM-Undercoated Plates with Classical Boundary Conditions [Volume 3, Issue 1, 2009]
  • Mohajerzadeh, Saenoddin Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Mohamadali, Meysam Development of Boundary Layer of Highly Elastic Flow of the Upper Convected Maxwell Fluid over a Stretching Sheet [Volume 9, Issue 2, 2016, Pages 35-44]
  • Mohamadi, Ehsan Assessment of Foolad Mobarakeh ST14 Low Carbon Steel Sheet for Automobile Frames [Volume 1, Issue 1, 2007]
  • Mohamadipour, Reza Analytical and Simulation of Free-Free Beam Subjected to Concentrated Impact Loadings [Volume 2, Issue 1, 2008]
  • Mohamadipour, Reza Parametric Analysis of Square Thin Walled Section in Energy Absorption due to Oblique Load [Volume 3, Issue 3, 2010]
  • MOHAMMAD Hoseni, SAEED Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem [Volume 5, Issue 2, 2012]
  • Mohammadi, Meisam Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]
  • Mohammadi, Saber A Simple Method for Designing a Duct for a Multi-Component Ducted Propulsion System [Volume 10, Issue 3, 2017, Pages 57-64]
  • Mohammadi, Y. Energy Absorption by Thin-Walled Tubes with various Thicknesses in Rectangular and Square Sections under Different Quasi-Static Conditions: Experimental and Numerical Studies [Volume 9, Issue 2, 2016, Pages 11-18]
  • Mohammadi, Younes Vibration Analysis of Different Types of Porous FG Circular Sandwich Plates [Volume 12, Issue 3, 2019, Pages 63-75]
  • Mohammadi, Younes Numerical Study of Microbeam with Geometric Discontinuity Under Electrostatic Load using Strain Gradient Theory [Volume 13, Issue 1, 2020, Pages 59-68]
  • Mohammadi Alasti, B. Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [Volume 10, Issue 4, 2017, Pages 63-73]
  • Mohammadian, A. Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [Volume 8, Issue 1, 2015, Pages 97-106]
  • Mohammadian, Ali Investigation of water balance in water recovery of closed steam injection gas turbine cycles [Volume 6, Issue 3, 2013]
  • Mohammadi Daniali, HamidReza Machine Tool Design Optimization of High Resolution Parallel Hexapod in Cartesian Workspace [Volume 4, Issue 3, 2011]
  • Mohammadi Daniali, H. R. Trajectory Path Planning of Cable Driven Parallel Manipulators, Considering Masses and Flexibility of the Cables [Volume 9, Issue 3, 2016, Pages 57-64]
  • Mohammadi Hooyeh, H. Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [Volume 10, Issue 2, 2017, Pages 1-13]
  • Mohammadiun, Mohammad Estimation of the Time-Dependent Heat Flux Using Temperature Distribution at a Point in a Three Layer System with None Homogeneous Boundary Conditions [Volume 9, Issue 3, 2016, Pages 93-102]
  • Mohammad Zaheri, Faeze Effect of TID-dressing on Fatigue Life Stress Concentration Factor in St37-2Butt Weldments [Volume 12, Issue 1, 2019, Pages 115-123]
  • Mohammed, Reham Comparative Study and Robustness Analysis of Quadrotor Control in Presence of Wind Disturbances [Volume 12, Issue 2, 2019, Pages 27-37]
  • Mohazab Pak, Alireza An Experimental Investigation of the Effects of Fiber Laser Percussion Drilling: Influence of Process Parameters [Volume 9, Issue 4, 2016, Pages 7-12]
  • Mohseni, Emad Thermal Loads and Surface Quality Evaluation in Machining of Hardened Die Steel under Dry and Cryogenic Machining [Volume 13, Issue 1, 2020, Pages 83-90]
  • Mohseni, Mohsen Analytical and Simulation of Free-Free Beam Subjected to Concentrated Impact Loadings [Volume 2, Issue 1, 2008]
  • MohseniShakib, Sayed Mohsen Optimization of Composite Rotor Blade Using Merged Genetic Algorithm and Finite Element Method [Volume 4, Issue 3, 2011]
  • Mohseni Shakib, MOhsen Analytical Solution and Simulation of Flexible Joint in Thrust Vector Control System under Bending [Volume 2, Issue 2, 2009]
  • Mohtasebi, Seyed Saeid Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method [Volume 14, Issue 2, 2021, Pages 85-92]
  • Mokhtari, Abolghasem Designing an Impedance Control Algorithm for a Teleoperation System for Orthopedic Surgery [Volume 13, Issue 2, 2020, Pages 33-40]
  • Mokhtarian, S NUMERICAL SIMULATION OF RAYLEIGH-TAYLOR INSTABILITY [Volume 6, Issue 1, 2013]
  • Molla Ramezani, Navid Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]
  • Mollayi, Nader Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]
  • Mollayi, Nader Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Mondali, M. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Mondali, Mehdi Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding [Volume 9, Issue 4, 2016, Pages 13-22]
  • Monfared, Vahid Analysis of Effective Factors on Rail Failure and Exerted Stress on Rail and Wheel [Volume 4, Issue 2, 2011]
  • Montazerolghaem, Hamid Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks [Volume 12, Issue 2, 2019, Pages 119-132]
  • Moradi, Mahmoud An Experimental Investigation of the Effects of Fiber Laser Percussion Drilling: Influence of Process Parameters [Volume 9, Issue 4, 2016, Pages 7-12]
  • Moradi, Mahmoud Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM [Volume 10, Issue 3, 2017, Pages 31-40]
  • Moradi, Mahmoud An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [Volume 11, Issue 2, 2018, Pages 57-67]
  • Moradi, Mehran Analysis of Liquid - Fuel Vortex [Volume 1, Issue 3, 2008]
  • Moradi, Mojtaba Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]
  • Moradian, M. Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods [Volume 10, Issue 2, 2017, Pages 101-108]
  • Moradi dastjerdi, Rasool Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment [Volume 9, Issue 2, 2016, Pages 79-91]
  • Moradi-Dastjerdi, Rasool Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Moradi Haghighi, Saeed A Novel Approach for Optimization of Vehicle Noise Insulators [Volume 13, Issue 3, 2020, Pages 9-20]
  • Moradkhani, AliReza Study and Analysis of Al2O3-SiC Nanocomposite Ceramics’ Fracture Toughness using Vickers Indenter [Volume 4, Issue 3, 2011]
  • Moradkhani, Ali Reza Microstructure and Mechanical Properties of Al2O3-SiC Nanocomposites with 0.05% MgO and Different SiC Volume Fraction [Volume 5, Issue 3, 2012]
  • Mori, K.I Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die [Volume 1, Issue 2, 2008]
  • Morovat, Foozie Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]
  • Morovat, Foozieh Analytical Solution for Buckling of Composite Sandwich Truncated Conical Shells subject to Combined External Pressure and Axial Compression Load [Volume 8, Issue 4, 2015]
  • Mortazavi Yazdi, Seyed Mehdi Pareto Optimal Design of Passive and Active Vehicle Suspension Models [Volume 9, Issue 4, 2016, Pages 59-73]
  • Mortezaei, Hosein Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Mosadeghzad, Mohamad Optimization, Controller and Observer Design of a Reconfigurable Mobile Robot Using Genetic Algorithm and Neural Network [Volume 3, Issue 2, 2010]
  • Mosalanejad, Hosein The Main Parameters Assessment of Clod and Stone Separation from Potato Crop (Inclined Belt Type) in Potato Harvester [Volume 3, Issue 2, 2010]
  • Mosayebi, Masoud Quick and Effective Modal and Flutter Analyses for Low Aspect Ratio Wings [Volume 13, Issue 4, 2020, Pages 89-97]
  • Motahari-Nezhad, Mohsen Studying the Effect of Different Vortex Generator Geometries and Arrangements on Heat Transfer Performance of Heat Sinks [Volume 13, Issue 3, 2020, Pages 21-31]
  • Motakef Imani, Behnam 2D Model of Floor Surface Roughness in Micro Milling Operation [Volume 3, Issue 3, 2010]
  • Motallebi, AmirAlaedin Estimation of Thrust Stand Structure Fatigue Life Under Solid Motors Random Vibrations Effects [Volume 1, Issue 4, 2008]
  • Motallebi, Amir Alaedin Dynamic Design Principles of a Thrust Stand and Methods of Improving Frequency Response [Volume 2, Issue 1, 2008]
  • Mousavi, SayedAli Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding [Volume 9, Issue 3, 2016, Pages 41-47]
  • Mousavi, S. H. Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [Volume 8, Issue 2, 2015, Pages 47-54]
  • Mousavi, S. M. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]
  • Mousavi Mashhadi, Mahmoud Numerical Study of Microbeam with Geometric Discontinuity Under Electrostatic Load using Strain Gradient Theory [Volume 13, Issue 1, 2020, Pages 59-68]
  • Mozafari, Ali Study of the Early Development Factors of Failure in Valves of Reciprocating Compressors by Experimental and Numerical Simulation [Volume 12, Issue 3, 2019, Pages 9-18]
  • Mozafary, Vajiha Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]
  • Mozaffari, Ali Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]

N

  • N., Jawahar Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography [Volume 9, Issue 3, 2016, Pages 103-113]
  • Naddaf Oskouei, Alireza Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch [Volume 7, Issue 3, 2014]
  • Naddaf Oskouei, Alireza Study of the Early Development Factors of Failure in Valves of Reciprocating Compressors by Experimental and Numerical Simulation [Volume 12, Issue 3, 2019, Pages 9-18]
  • Naddaf Oskouei*, A. R. Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [Volume 10, Issue 2, 2017, Pages 1-13]
  • Nader, Saeid Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4 [Volume 9, Issue 2, 2016, Pages 93-100]
  • Naderi, Davoud Optimization, Controller and Observer Design of a Reconfigurable Mobile Robot Using Genetic Algorithm and Neural Network [Volume 3, Issue 2, 2010]
  • Naderi, Mahmood Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel [Volume 14, Issue 2, 2021, Pages 37-48]
  • Naderi, Reihane Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [Volume 8, Issue 4, 2015]
  • Naderi, Salman Analysis of the Dynamical Behavior of the Delay Mechanism in a Projectile Motion Controller, Using 3D Finite Element Simulation [Volume 3, Issue 3, 2010]
  • Naderpour, Payman Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Nadri, Hamidreza Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Najafi, Khaled Determining Maximum Dynamic Load Carrying Capacity of Cable Robots Between Two End Points of Workspace [Volume 3, Issue 1, 2009]
  • Najafi, M. Experimental and Analytical Study of Aluminum-oxide Nanofluid Implication for Cooling System of an Amphibious Engine [Volume 10, Issue 1, 2017, Pages 51-56]
  • Najafi, Mohamad Experimental and Analytical Study of Aluminum-oxide Nanofluid Implication for Cooling System of an Amphibious Engine [Volume 10, Issue 1, 2017, Pages 51-56]
  • Najafi, Mohammad Reza Effect of using a Dynamic Absorber On Vibrations of an Opposed-Piston Ultralight Aircraft Engine [Volume 14, Issue 1, 2021, Pages 91-99]
  • Najafi, Mohammad Reza Modeling and Simulation of 6DOF robot Manipulators with Tactile Position-Force control [(Articles in Press)]
  • Najafi, Moslem The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]
  • Najafi, Peyvand Design and Manufacture of Clutch Pedal Linkage with Clutch Cable [Volume 1, Issue 4, 2008]
  • Najafzadeh, MohamadMehdi Three Dimensional Free Vibration of FGM Circular Plates Using Semi-Analytical Method [Volume 3, Issue 1, 2009]
  • Najafzadeh, MohamadMehdi Numerical Analysis of Rectangular Isotropic and Orthotropic Thin Plates Based on the Radial Point Interpolation Method (RPIM) [Volume 3, Issue 3, 2010]
  • Nami, Bahram The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91 [Volume 12, Issue 4, 2019, Pages 9-16]
  • Namjoo, Moslem Stress Analysis of Tractor Tire Interaction whit Soft Soil using Non-linear 2D Finite Element Method [Volume 5, Issue 3, 2012]
  • Namjoo, Moslem Investigating the effect of temperature on mechanical behavior of rubber compounds embedded in composite structure of pneumatic tires [Volume 7, Issue 4, 2014]
  • Namjoo, Moslem Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Nankali, Naser Stress Analysis of Tractor Tire Interaction whit Soft Soil using Non-linear 2D Finite Element Method [Volume 5, Issue 3, 2012]
  • Naseri, Masab Investigating the Effect of Manganese Content on the Properties of High Manganese Austenitic Steels [Volume 10, Issue 1, 2017, Pages 75-83]
  • Nasiri, S. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Nategh, MohamadJavad Culling Force Investigation in Turning Process via Ultrasonic Assisted Turning on Al7075 Workpiece [Volume 3, Issue 4, 2010]
  • Navidfar, MohamadHosein Vehicle Interior Structure Borne Noise Calculation Using Finite Element Method [Volume 2, Issue 4, 2009]
  • Nayebpashaee, N. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Nazari, Farshad Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [Volume 11, Issue 4, 2018, Pages 91-97]
  • Nazari, Mohamad Reza Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Nazemi, Hamid An Investigation on Hydrogen Embrittlement of the Cr-Si Spring Steel Using Slow Strain Rate Test and Weibull Model [Volume 8, Issue 4, 2015]
  • Nazri, Mehdi Investigation on Microstructure and Production of Coaxial Cable Foam Insulation using Butane Gas [Volume 2, Issue 1, 2008]
  • Negahbani, Navid Dynamic Analysis and Path Control of a Snake Like Robot [Volume 2, Issue 2, 2009]
  • Nelson, Jack A Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Neyestanak, Ali Akbar Lotfi Exact Vibration and Buckling Solution of Levy Type Initially Stressed Rectangular Thin Plates [Volume 6, Issue 4, 2013]
  • Nezam Abadi, AliReza Numerical Analysis of Rectangular Isotropic and Orthotropic Thin Plates Based on the Radial Point Interpolation Method (RPIM) [Volume 3, Issue 3, 2010]
  • Nezamoleslami, Elyas Extracting Lateral Transfer Function of a Remotely Piloted Helicopter by System Identification Method Using 3-DOF Test Stand [Volume 4, Issue 2, 2011]
  • Niakan, Saeed Calculation of Elastic Modulus of Reinforced Nanocomposites by Carbon Nanotubes using Finite Element Method, Averaging Approach and Micromechanics Relations [Volume 4, Issue 1, 2010]
  • Nikbakht, Abbas Analysis of Nano-Particles Motion in 3D and Axisymmetric Models through a Multiple Aerodynamic Lens and Comparison with Applied Models [Volume 2, Issue 4, 2009]
  • Nikbakht, Masoud Characterization and Determination of Critical Interlaminar Fracture Toughness of Carbon- Epoxy with Arcan Specimen [Volume 2, Issue 3, 2009]
  • Nikforouz, Mehdi Investigating the Effect of Geometric Parameters on the Twist Angle in Roll-Forming of Non-Symmetric Channel Section, Using Finite Element Simulation [Volume 2, Issue 3, 2009]
  • Nikkhoo, Mohammad Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements [Volume 13, Issue 4, 2020, Pages 39-47]
  • Nikkhoo, Mohammad Design of different geometry structures tissue scaffolds for additive manufacturing [(Articles in Press)]
  • Niknam, Seyed Ali Simultaneous use of Acoustic Emission Signals and Statistical Analysis to Distinguish between Lubrication Modes in Rolling Element Bearings [Volume 11, Issue 4, 2018, Pages 81-90]
  • Nikoobin, Amin Optimal Balancing of Spatial Suspended Cable Robot in Point-to-Point Motion using Indirect Approach [Volume 10, Issue 3, 2017, Pages 87-96]
  • Nikoobin, Amin Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Nilsaz Dezfouli, Hamid Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [Volume 11, Issue 4, 2018, Pages 115-129]
  • Niroomand, Mohammad Reza Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method [Volume 11, Issue 2, 2018, Pages 95-101]
  • Niroumand, B. Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [Volume 8, Issue 1, 2015, Pages 85-95]
  • Niyavarani, Ensieh Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Noorian, M. T. Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]
  • Noorifar, E. Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [Volume 8, Issue 1, 2015, Pages 97-106]
  • Noroozi, M. Sliding Mode Control of AFM in Cantact Mode during Manipulation of Nano-particle [Volume 6, Issue 4, 2013]
  • Norouzi, A. R. Effect of AFM Cantilever Geometry on the DPL Nanomachining Process [Volume 9, Issue 4, 2016, Pages 75-80]
  • Norouzi, R. Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [Volume 8, Issue 1, 2015, Pages 25-33]
  • Norouzi Ghazbi, Somayeh Prismatic Series of Elastic Actuator: Modelling and Control by ICA and PSO-tuned Fractional Order PID [Volume 8, Issue 4, 2015]
  • Nourbakhsh, ahmad Studying the Behavior of a Variable Pitch “Hydro Screw” Micro Hydro Turbine, Numerical Analysis and Experimental Investigation [Volume 12, Issue 4, 2019, Pages 57-65]
  • Nourbakhsh, Amireh Evaluation of ANN and ANFIS Methods in Study of the Motion of a Bubble in A Combined Couette-Poiseuille Flow [Volume 14, Issue 1, 2021, Pages 33-42]
  • Nourbakhsh, Sayed Hassan Investigation of Mechanical Property and Microstructure of Nanocomposite AZ31/SiC Fabricated by Friction Stir Process [Volume 9, Issue 2, 2016, Pages 27-34]
  • Nourbakhsh, Sayed Hassan Free Vibration Analysis of Nanoplates using Differential Transformation Method [Volume 10, Issue 1, 2017, Pages 39-49]
  • Nourbakhsh, S. H. Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique [Volume 11, Issue 1, 2018, Pages 33-41]
  • Nouri, N. M. A Simple Method for Designing a Duct for a Multi-Component Ducted Propulsion System [Volume 10, Issue 3, 2017, Pages 57-64]
  • Nouri, Saeed Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]
  • Nourollahi, Iman Numerical Analyses of Steady Non-Newtonian Flow over Flat Plate on Intermediate Reynolds Numbers by Finite Volume Method [Volume 1, Issue 4, 2008]
  • Nourollahi, Iman An Investigation of Lid Driven Cavity Flow Using Large Eddy Simulation [Volume 2, Issue 1, 2008]
  • Nourouzi, Salman An Experimental/Numerical study on the effect of forming parameters in sheet hydrodynamic deep drawing [Volume 6, Issue 1, 2013]

O

  • Oloumi, Sayed AmirAbbas Using Adaptive Meshing for Solving the Transonic Flow around Airfoils [Volume 1, Issue 3, 2008]
  • Orak, Mohammad Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]

P

  • Padayodi, E. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]
  • Paidar, Moslem Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Pak, Abbas Determination of Material Properties Components used in FEM Modeling of Ultrasonic Piezoelectric Transducer [Volume 12, Issue 2, 2019, Pages 75-81]
  • Pak, Abbas Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming [Volume 13, Issue 3, 2020, Pages 1-8]
  • Pak, Abbas Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Paknejad, Masih Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming [Volume 13, Issue 3, 2020, Pages 1-8]
  • Pakzad, Sajjad Workspace Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 10, Issue 4, 2017, Pages 1-6]
  • Pakzad, Sajjad Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism [Volume 11, Issue 2, 2018, Pages 47-56]
  • PanahiZadeh, Farshad THE ENERGY AND EXERGY ANALYSIS OF SINGLE EFFECT ABSORPTION CHILLER [Volume 4, Issue 4, 2011]
  • Panchal, Hitesh N Performance Improvement of Solar Stills via Experimental Investigation [Volume 5, Issue 5, 2012]
  • Parhizkar, Janan Study on the Wettability and Optical Properties of Polydimethylsiloxane-SiO2 Nano-composite Surfaces [Volume 13, Issue 4, 2020, Pages 21-29]
  • Parhizkar Yaghoobi, Mohammad A thermoelasticity solution for thick cylinders subjected to thermo-mechanical loads under various boundary conditions [Volume 8, Issue 4, 2015]
  • Parsa, Hossein Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Parvizi, Fardin Modal Coefficients Identification Using Wavelet Transform [Volume 4, Issue 3, 2011]
  • Parvizi, S. Experimental Study of the Effect of Impeller Geometrical Parameters on Fluid Hydrodynamics in Copper Solvent Extraction Mixer [Volume 10, Issue 4, 2017, Pages 21-25]
  • Patel, Raj Kumar Analysis and Interpretation of Bearing Vibration Data Using Principal Component Analysis and Self - Organizing Map [Volume 9, Issue 1, 2016]
  • Patil, Chetan Effect of Processing Parameters on Properties of Friction Stir Welded Joints of Aluminium Alloys AA7075- T651 and AA6061-T6 [Volume 10, Issue 2, 2017, Pages 93-99]
  • Patil, H. S. An Experimental Study on Full Toroidal Continuously Variable Transmission System [Volume 5, Issue 1, 2011]
  • Patil, H. S. Effect of Processing Parameters on Properties of Friction Stir Welded Joints of Aluminium Alloys AA7075- T651 and AA6061-T6 [Volume 10, Issue 2, 2017, Pages 93-99]
  • Patil, H. S. Patil Influence of weld process parameters on material characterization of friction stir welded joints of aluminium alloy AA6061-T6 [Volume 6, Issue 4, 2013]
  • Patil, Sushil Sahebrao Vibration Suppression of Grass Trimmer Handle using Tunable Vibration Absorber [Volume 12, Issue 2, 2019, Pages 39-44]
  • Pavani, Gudla Investigation of Stresses in U-Shaped Metal Bellow Using EJMA Standards [Volume 10, Issue 2, 2017, Pages 25-35]
  • Pawade, R. S. Investigations on Surface Integrity and Electrochemical Behavior of Machined Co-Cr-Mo Bio-implant Alloy [Volume 9, Issue 4, 2016, Pages 51-58]
  • Payvandy, Pedram Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Improvement of the Mechanical Performance [Volume 7, Issue 4, 2014]
  • Payvandy, Pedram Non-linear simulation of drying of plain knitted fabric using mass-spring-damper model and genetic algorithm optimization [Volume 7, Issue 4, 2014]
  • Pazooki, Farshad Injection into Orbit Optimization using Orthogonal Polynomials [Volume 9, Issue 3, 2016, Pages 65-75]
  • Pazooki, Farshad Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Pezhman, Alireza An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Pouranvari, Majid Effect of Expulsion on Energy Absorption Capability of Low Carbon Steel Resistance Spot Welds [Volume 4, Issue 2, 2011]
  • Pourfarzaneh, Hossein Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Pourmoayed, Ali Effect of Important Physical and Geometrical Parameters on the Dynamic Response of Thick Composite Plates with Smart Attached Mass [Volume 12, Issue 4, 2019, Pages 67-81]
  • Pourmostaghimi, Vahid Tool Wear Modeling in Drilling Process of AISI1020 and AISI8620 Using Genetic Programming [Volume 10, Issue 1, 2017, Pages 93-100]
  • Poursafar, Amin Design of a Dynamically Balanced 2-DOF Planar Parallel Manipulator using Four-bar Legs [Volume 10, Issue 3, 2017, Pages 81-86]
  • Poursina, Mehrdad Finite Element Analysis of Self Destruction Mechanism in a Mechanical Controller [Volume 3, Issue 2, 2010]
  • Poursoltan, Afsaneh The Main Parameters Assessment of Clod and Stone Separation from Potato Crop (Inclined Belt Type) in Potato Harvester [Volume 3, Issue 2, 2010]
  • Prasad, Kondapalli Siva Analysis of Stresses in Tapered Rectangular Utility Pole [Volume 11, Issue 1, 2018, Pages 15-25]
  • Prasad, K. Siva Qualification of Propeller by Experimental and Analytical Methods [Volume 12, Issue 1, 2019, Pages 31-39]

Q

  • Qasemi-Mahallekolaei, Mojtaba Accuracy Improvement of Upper Bound Analysis of Bimetallic Rods Extrusion Using a New Velocity Field [Volume 9, Issue 4, 2016, Pages 99-107]

R

  • Rad, Manouchehr Drag-Reduction Characteristics in Air Flow over the Iced Surface at Re>104 [Volume 1, Issue 2, 2008]
  • RaeisiFard, H. Developing a control strategy for AFM nano- micro manipulation [Volume 8, Issue 2, 2015, Pages 11-16]
  • Raf'at, Mohsen Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]
  • Rafati, Ehsan Investigation of Variance of Roller Burnishing Parameters on Surface Quality by Taguchi Approach [Volume 6, Issue 3, 2013]
  • Rafee Nekoo, Saeed Engineering Design of the Guidance System of the 6R Tele-robot based on DTMF [Volume 7, Issue 3, 2014]
  • Rafee Nekoo, Saeed Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [Volume 8, Issue 3, 2015]
  • Rafee Nekoo, Saeed Determining Position and Orientation of 6R Robot using Image Processing [Volume 11, Issue 1, 2018, Pages 95-103]
  • Rafeeyan, M. Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [Volume 8, Issue 1, 2015, Pages 25-33]
  • Rafeeyan, Mansour A New Approach for Non Contact Measuring of Tension in Fixed and Moving Wires [Volume 5, Issue 4, 2012]
  • Raghebi, Mehdi Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [Volume 11, Issue 4, 2018, Pages 107-113]
  • Rahbari, AliReza Combustion Modeling of Lycopodium Particles by Assuming the Temperature Difference Between Gas and Particle [Volume 1, Issue 4, 2008]
  • Rahimi, GH Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]
  • Rahimi, Gholamhossien Design and Analysis of Metal-Composite Vessel under Internal Pressure [Volume 14, Issue 4, 2021, Pages 1-10]
  • Rahimi, Masoumeh Direct Kinematics Solution of 3-RCC Parallel Robot using a Semi-Analytical Homotopy Method [Volume 12, Issue 1, 2019, Pages 1-12]
  • Rahimi, Monavvar Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Rahimipour, Hassan The effect of carbon nanotubes on buckling analysis of embedded oil pipes resting on elastic medium [Volume 7, Issue 2, 2014]
  • Rahmani, F. Experimental Investigation of Effective Parameters on a New Incremental Tube Bulging Method Using Rotary Tool [Volume 10, Issue 2, 2017, Pages 83-91]
  • Rahmani, Hossein Studying the Effect of Pulse Shape on Dynamic Stress Intensity Factor at the Finite Crack Tip using Displacement Fields [Volume 13, Issue 2, 2020, Pages 109-117]
  • Rahmani, Hossein Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Rahmani, Mohsen Vibration Analysis of Different Types of Porous FG Circular Sandwich Plates [Volume 12, Issue 3, 2019, Pages 63-75]
  • Rahmani, Mohsen Experimental and Numerical Study of Lateral Loadings on the Composite Tubes with SMA and Aluminum Wires and Without Wire [Volume 14, Issue 2, 2021, Pages 15-22]
  • Rahmanian, Behnam Numerical Investigation of Heat Transfer in Circular Perforated Plates Exposed to Parallel Flow and Suction [Volume 1, Issue 3, 2008]
  • Rahmati, Ahmad Reza Thermodynamic Analysis of a Modified Two-Stage Trans-Critical CO2 Refrigeration Cycle with Multi Inter-Cooling System [Volume 10, Issue 3, 2017, Pages 97-104]
  • Rahmati, A. R. Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [Volume 8, Issue 2, 2015, Pages 47-54]
  • Rahmati, S. Design and Control of a 3 DOF Hand Skeleton for Rehabilitation after Stroke [Volume 8, Issue 2, 2015, Pages 17-28]
  • Rahmati, sadegh Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts [Volume 7, Issue 1, 2014]
  • Rahmati, Sadegh Multi-Stage Optimum Design for Composite Pressure Vessels [Volume 1, Issue 1, 2007]
  • Rahmati, Sadegh Shock Suspension System Review and Analysis of Airplane During Landing [Volume 1, Issue 4, 2008]
  • Rahmati, Sadegh Design and Manufacture of Clutch Pedal Linkage with Clutch Cable [Volume 1, Issue 4, 2008]
  • Rahmati, Sadegh Dynamic Design Principles of a Thrust Stand and Methods of Improving Frequency Response [Volume 2, Issue 1, 2008]
  • Rahmati, Sadegh Simulation and Experimental Study of Modern Fiber Metal Laminate Panels Used in Auto Body to Reduce Vehicle Weight [Volume 4, Issue 3, 2011]
  • Rahmati, Sadegh Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Rahmati, Sadegh Design and Analysis of a New Dental Implant using Finite Element Method [Volume 6, Issue 3, 2013]
  • Rahmati, Sadegh Experimental Investigation of Laser Power Effect on Growth Rate of Intermetallic Compound in Al/Cu Bimetal Produced by Laser Cladding Method [Volume 9, Issue 1, 2016]
  • Rahmati, Sadegh Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements [Volume 13, Issue 4, 2020, Pages 39-47]
  • Rajabi, Farshid Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method [Volume 14, Issue 4, 2021, Pages 19-25]
  • Rajabi, Iraj Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Rajabi, Parham Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution [Volume 14, Issue 2, 2021, Pages 49-63]
  • Rajabirad, M. J. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Rajaee, Mastafa Impact of Loading Rate in Hot Tube Gas Forming of AA6063 [Volume 12, Issue 1, 2019, Pages 59-66]
  • Rashidi, MohamadMehdi Exergy Analysis and Optimization of Combined Rankin Power and Ejector Refrigeration Cycle [Volume 3, Issue 4, 2010]
  • Rashidian, R. Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]
  • Rasouli, Mohammad Ali A New Approach for Determining the Optimum Pressure–Time Diagram in Superplastic Forming Process [Volume 6, Issue 3, 2013]
  • Rasouli, Sayed AliReza Measuring Vibration in the Air Slide Tables of Ultra Precision Machines With the Different Number of Air Pockets [Volume 3, Issue 1, 2009]
  • Rasouli, SeyedAlireza Evaluation of Parameters Affecting Magnetic Abrasive Finishing (MAF) of Superalloy Inconel 718 [Volume 10, Issue 3, 2017, Pages 1-10]
  • Rasouli Jazi, Saeid Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining [Volume 14, Issue 2, 2021, Pages 65-71]
  • Rastegar, Zahra Investigation of the AFM Indenter’s Geometry Effect On Micro/Nano Biological Cells’ Indentation [Volume 13, Issue 4, 2020, Pages 99-108]
  • Rastgoo, Abbas An Investigation in the Deformation Zone of the ECAE Process by the Upper Bound Theorem [Volume 2, Issue 3, 2009]
  • Rastgoo, Abbas An Analytical Model for Free Vibration Analysis of Smart Annular FGM Plates Integrated with Piezoelectric Layers [Volume 4, Issue 2, 2011]
  • RAVITEJA, GURRAM Stress and Strain Analysis in Cup Drawing Process for Different Materials using ANSYS Software [Volume 14, Issue 4, 2021, Pages 45-50]
  • Razavi, A. A. Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [Volume 8, Issue 2, 2015, Pages 1-9]
  • Razavi, Hamed Ultrasonic Assisted Equal Channel Angular ‎Extrusion Process ‎‎(UAECAE)‎ [Volume 10, Issue 1, 2017, Pages 13-22]
  • Reiszadeh, Farhad Analysis of Nano-Particles Motion in 3D and Axisymmetric Models through a Multiple Aerodynamic Lens and Comparison with Applied Models [Volume 2, Issue 4, 2009]
  • Rennie, Allan E W Effects of Scan Direction and Orientation on Mechanical Properties of Laser Sintered Polyamide-12 [Volume 7, Issue 3, 2014]
  • Rezaee Hajideh, Mojtaba Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling [Volume 11, Issue 3, 2018, Pages 1-9]
  • Rezaei, AliReza Genetic Algorithm Application in Guided Rockets [Volume 1, Issue 2, 2008]
  • Rezaei Farimani, Mehdi Atomistic and Continuum Simulations on Tensile Property of a Single Crystal Metal with Nano-holes [Volume 1, Issue 1, 2007]
  • Rezapour, Javad An Online Trajectory Tracking Control of a Double Flexible Joint Manipulator Robot by Considering the Parametric and Non-Parametric Uncertainty [Volume 14, Issue 2, 2021, Pages 93-110]
  • Riahi, Mohammad Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]
  • Riahi, Mohammad A Practical Approach to Analysis of Hydromechanical Deep Drawing of Superalloy Sheet Metals by Using Finite Element Method [Volume 6, Issue 1, 2013]
  • Rismani Yazdi, Saeed Finite element investigation and optimization of tool wear in drilling process of difficult-to-cut nickel base superalloy using response surface methodology [Volume 7, Issue 2, 2014]
  • Riyahi Vezvari, Mojtaba Optimal Balancing of Spatial Suspended Cable Robot in Point-to-Point Motion using Indirect Approach [Volume 10, Issue 3, 2017, Pages 87-96]
  • Roohi, Amir H. Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process [Volume 14, Issue 1, 2021, Pages 43-49]
  • Roohi, Amir Hossein Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets [Volume 13, Issue 3, 2020, Pages 51-57]
  • Roshanian, Jafar Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]
  • Rostami, Majid Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM [Volume 10, Issue 3, 2017, Pages 31-40]
  • Rouhani Esfahani, A. Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator [Volume 10, Issue 2, 2017, Pages 71-81]
  • Rouholamin, Iman Taylor-Couette Flow Instabilities in Journal Bearings [Volume 4, Issue 1, 2010]
  • Rousta, Ali Mohammad The Case Examination of Detection of Structural Damages on a Plate using Wavelet Transform [Volume 13, Issue 2, 2020, Pages 91-97]
  • Rouzbahani, MohammadHosein Comparative Investigation in a Turbine Blade Passage Flows with Several Different Turbulence Models [Volume 4, Issue 4, 2011]

S

  • Saberi Varzaneh, Ali Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel [Volume 14, Issue 2, 2021, Pages 37-48]
  • Saber-Samandari, Saeed Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Sadat Behineh, E. Effects of baffle on separated convection step flow of radiating gas in a duct [Volume 8, Issue 3, 2015]
  • Sadegh Amalnik, Morteza An Intelligent Knowledge Based System for CO2 Laser Beam Machining for Optimization of Design and Manufacturing [Volume 9, Issue 4, 2016, Pages 39-50]
  • Sadegh Amalnik, Morteza Expert System Approach for Optimization of Design and Manufacturing Process for Rotary Ultrasonic Machining [Volume 11, Issue 1, 2018, Pages 1-13]
  • Sadegh Amalnik*, M. Expert System Approach for Manufacturability Evaluation of Nd: YAG Laser Beam Machining Process [Volume 10, Issue 2, 2017, Pages 15-24]
  • Sadeghi, Babak Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics [Volume 14, Issue 3, 2021, Pages 25-33]
  • Sadeghi, MohamadAli Experimental and Numerical Analysis of Bevel Gear Forge Method and Comparing it with Machining Method [Volume 2, Issue 3, 2009]
  • Sadidi, Mohsen Investigation of The Effect of Notch Tip Radius on Fracture Energy of Charpy in 7075 Aluminium Alloy [Volume 13, Issue 2, 2020, Pages 65-72]
  • Sadidi, Mohsen Investigation of the Stability of the Ball and Beam by the PID Controller [Volume 14, Issue 1, 2021, Pages 51-58]
  • Sadodin, Seyfollah Influence of Element Order in Various Aspect of Evolutionary Structural Optimization [Volume 3, Issue 2, 2010]
  • Sadraee Far, M.N. Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading [Volume 14, Issue 1, 2021, Pages 101-113]
  • Sadrnezhaad, Seyed Khatiboleslam Intermetallic phase formation during combustion synthesis of mechanically activated Ni-Ti alloy [Volume 7, Issue 4, 2014]
  • Saeedi, Mohammad Amin A New Robust Strategy to Improve the Transient Dynamic of a Vehicle [Volume 12, Issue 2, 2019, Pages 53-61]
  • Saeedi Heydari, M. Synthesis of B4C - Nano TiB2 Composite Nano Powder by the Chemical Precipitation Method [Volume 10, Issue 4, 2017, Pages 55-61]
  • Safaei, MohamadReza Numerical Investigation of Heat Transfer in Circular Perforated Plates Exposed to Parallel Flow and Suction [Volume 1, Issue 3, 2008]
  • Safaei, MohamadReza Numerical Analyses of Steady Non-Newtonian Flow over Flat Plate on Intermediate Reynolds Numbers by Finite Volume Method [Volume 1, Issue 4, 2008]
  • Safaei, Parnian Natural Convection in an Inclined Partitioned Enclosure with Local Heat Source [Volume 3, Issue 2, 2010]
  • Safaei, Sahar Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [Volume 8, Issue 4, 2015]
  • Safaiy, MohammadReza Finite Volume Solutions of 2-D Steady Incompressible Navier-Stokes Equations in Driven Skewed Cavity Flow with Non-Orthogonal Grid Mesh [Volume 1, Issue 1, 2007]
  • Safaiy, MohammadReza Numerical Studies of Laminar Natural Convection in a Square Cavity with Orthogonal Grid Mesh by Finite Volume Method [Volume 1, Issue 2, 2008]
  • Safaiy, MohammadReza Numerical Simulation of Laminar and Turbulent Mixed Convection in Rectangular Enclosure with Hot upper Moving Wall [Volume 3, Issue 2, 2010]
  • Safari, Hamid Heat Exchangers in A C3MR LNG Plant, Cooling Curves and Their Effects on Efficiency [Volume 3, Issue 3, 2010]
  • Safari, K. Hoseini Energy Absorption by Thin-Walled Tubes with various Thicknesses in Rectangular and Square Sections under Different Quasi-Static Conditions: Experimental and Numerical Studies [Volume 9, Issue 2, 2016, Pages 11-18]
  • Safari, Mehdi Numerical Investigation of Laser Bending of Perforated Sheets [Volume 9, Issue 2, 2016, Pages 53-60]
  • Safari, Mehdi Experimental Investigation of Maximum Achievable Convolution Height of Metallic Bellows in Hydroforming Process [Volume 11, Issue 2, 2018, Pages 69-74]
  • Safari, Mehdi Fabrication of a Complicated Specimen with Two Point Incremental Forming Process [Volume 12, Issue 4, 2019, Pages 83-88]
  • Safari, Saman Optimization of the Manufacturing Process of Natural Fibre Thermoplastic Composites in order to Minimize Warpage [Volume 2, Issue 3, 2009]
  • Safarian, I. Designing an Artificial Neural Network Based Model for Online Prediction of Tool Life in Turning [Volume 8, Issue 2, 2015, Pages 65-71]
  • Safarpour Erfani, Pedram Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Safieddin Ardebili, Seyed Mohammad Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm [Volume 14, Issue 3, 2021, Pages 55-64]
  • Safizadeh, Mir Saeed Combining Magnetic Flux Leakage and Optical Inspection Technique for Identification of Nearby Pittings [Volume 11, Issue 4, 2018, Pages 73-80]
  • Safizadeh, M. S. Gas Pipeline Corrosion Mapping Using Pulsed Eddy Current Technique [Volume 5, Issue 1, 2011]
  • Safizadeh, M. S. Application of Pulsed eddy current technique to stress and residual stress measurement [Volume 7, Issue 1, 2014]
  • SAINI, VINOD KUMAR Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Sajed, Moosa A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets [Volume 12, Issue 4, 2019, Pages 47-56]
  • Sajed, Moosa Analysis of Material Flow and Phase Transformation in Friction Hydro-Pillar Processing of 1045 Steel [Volume 13, Issue 4, 2020, Pages 31-37]
  • Sajed, Moosa Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]
  • Salahshoor, Esmaeil Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint [Volume 11, Issue 3, 2018, Pages 35-44]
  • Salarpour, Amir Optimizing the Parameters Contributing to Riveting Quality Using Imperialist Competitive Algorithm and Predicting the Objective Function via the Three Models MLR, RBF, and ANN-GA [Volume 9, Issue 1, 2016]
  • Saleh, Sayed Reza Finite Volume Solutions of 2-D Steady Incompressible Navier-Stokes Equations in Driven Skewed Cavity Flow with Non-Orthogonal Grid Mesh [Volume 1, Issue 1, 2007]
  • Saleh, Sayed Reza Numerical Studies of Laminar Natural Convection in a Square Cavity with Orthogonal Grid Mesh by Finite Volume Method [Volume 1, Issue 2, 2008]
  • Salehi, Farzaneh Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Salehi, M. Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature [Volume 10, Issue 2, 2017, Pages 109-120]
  • Salehi, Maral Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Salehi, Mehdi Modal Analysis of Complex Structures via a Sub-Structuring Approach [Volume 14, Issue 1, 2021, Pages 59-71]
  • Salehi, Mohsen Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite [Volume 11, Issue 1, 2018, Pages 27-32]
  • Salehi Marzijarani, Hosain Chaotic Motion and its Control for a non-Planar non-Linear Cantilever Beam with Parametric Excitation [Volume 1, Issue 1, 2007]
  • Salehipour, Hamzeh Investigation into the Importance of Pre-Design Procedure in Vibration Absorbers Installations [Volume 4, Issue 1, 2010]
  • Salehipour, Hessam Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle [Volume 1, Issue 3, 2008]
  • Salimi, A. Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [Volume 10, Issue 4, 2017, Pages 75-83]
  • Salimi, Hadi Frequency Analysis of Ring-Stiffened Composite Cylindrical Shells Using Experimental, Analytical and Finite Element Methods [(Articles in Press)]
  • Salimiasl, A. Designing an Artificial Neural Network Based Model for Online Prediction of Tool Life in Turning [Volume 8, Issue 2, 2015, Pages 65-71]
  • Salmani, Mehdi Finite Element Analysis of Self Destruction Mechanism in a Mechanical Controller [Volume 3, Issue 2, 2010]
  • Salmani, MohamadReza Study of Metallurgical Properties Effects and Effective Parameters on Fracture Bio-Medical Stainless Steel 316L of Human's Body [Volume 4, Issue 1, 2010]
  • SalmaniTehrani, Mehdi Investigating the Effect of Geometric Parameters on the Twist Angle in Roll-Forming of Non-Symmetric Channel Section, Using Finite Element Simulation [Volume 2, Issue 3, 2009]
  • SalmaniTehrani, Mehdi Analytical and Numerical Investigation of the Deformation Length in Roll Forming Process of Circular Tubes [Volume 3, Issue 2, 2010]
  • SalmaniTehrani, Mehdi Analysis of the Dynamical Behavior of the Delay Mechanism in a Projectile Motion Controller, Using 3D Finite Element Simulation [Volume 3, Issue 3, 2010]
  • Sam Daliri, O. Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure [Volume 10, Issue 2, 2017, Pages 133-141]
  • Sami, Saeed Frequency Response of AFM Nano Robot in Liquid by considering the effect of Cantilever's dimension and Environmental Parameters [Volume 7, Issue 4, 2014]
  • Samsami, AliReza Free Vibration Analysis of S-FGM-Coated and S-FGM-Undercoated Plates with Classical Boundary Conditions [Volume 3, Issue 1, 2009]
  • Sanayeei, Ali Effects of Cooling Air Direction and Velocity on a Branwheat Biscuit’s Temperature in the Cooling Line of Razavi Food Industries Company [Volume 2, Issue 4, 2009]
  • Saraeian, Payam Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel [Volume 9, Issue 4, 2016, Pages 1-6]
  • Saraeian, Payam Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Saraeiyan, Payam Machining Parameters Optimization of Self – Rotating Turing Tools Via Taguchi Method [Volume 1, Issue 3, 2008]
  • Sarhaddi, Faramarz Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Sarpoolaky, H. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Sattar, S. Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process [Volume 10, Issue 2, 2017, Pages 121-131]
  • Sattari, Sajjad Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [Volume 8, Issue 3, 2015]
  • Sayadi, H Numerical simulation of turbulent flow around an airfoil with blunt trailing edge aerodynamic characteristics modification of this airfoil with base and aerodynamic cavity [Volume 6, Issue 1, 2013]
  • Sayahbadkhor, Mostafa Study of the Early Development Factors of Failure in Valves of Reciprocating Compressors by Experimental and Numerical Simulation [Volume 12, Issue 3, 2019, Pages 9-18]
  • Sayah Badkhor, M. Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [Volume 10, Issue 2, 2017, Pages 1-13]
  • Sayah Badkhor, Mostafa High-Velocity Compaction of Aluminum Powder by Gas Detonation Forming Technique [Volume 13, Issue 1, 2020, Pages 17-29]
  • Sayed Nasrollah, Sayed Mehdi Analysis and Optimization of Reducing Steady State Time for Heating Systems [Volume 2, Issue 2, 2009]
  • Sazesh, Sina Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation [Volume 10, Issue 1, 2017, Pages 57-74]
  • Sebghatollahi, Farhad Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Sedaghat, Ahmad Taylor-Couette Flow Instabilities in Journal Bearings [Volume 4, Issue 1, 2010]
  • Sedaghat, Ahmad NUMERICAL SIMULATION OF RAYLEIGH-TAYLOR INSTABILITY [Volume 6, Issue 1, 2013]
  • Sedighi, Kourosh Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell [Volume 3, Issue 4, 2010]
  • Sedighi, M. Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding [Volume 9, Issue 4, 2016, Pages 13-22]
  • Sedighi, Mohamad Numerical Study of Effective Parameters on Cold Rolling of Tri-layers Al/St/Al and Cu/Al/Cu [Volume 3, Issue 1, 2009]
  • Sedighi, Mohammad Experimental and Numerical Study of Through Thickness Residual Stresses Distribution in Sheet Metals Produced by ECAR [Volume 5, Issue 4, 2012]
  • Sedighi, Mohammad Effects of Geometrical Tolerances on Residual Stresses in a Compound Shrink Fitted Pressure Vessel [Volume 7, Issue 2, 2014]
  • Seidi, E. Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [Volume 10, Issue 4, 2017, Pages 75-83]
  • Seidi, Hasan Increasing the Fundamental Frequency of the Cantilever Rotating Beam by Placing the Intermediate Elastic Support with Minimum Stiffness at the Optimum Point Based on the Courant’s Maximum–Minimum Theorem using Finite-Element Analysis Software [Volume 14, Issue 3, 2021, Pages 65-73]
  • Selahi, Ehsan Non-linear Analysis of Adhesive Joints in Composite Structures [Volume 9, Issue 1, 2016]
  • Sepahi-Boroujeni, S. Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy [Volume 9, Issue 3, 2016, Pages 11-18]
  • Setayandeh, Mohammad reza Constrained Optimization of a Commercial Aircraft Wing Using Non-dominated Sorting Genetic Algorithms (NSGA) [Volume 8, Issue 4, 2015]
  • Seydi, MohamadReza Finite Element Simulation of C.V. Joint Forging of Prid Using Arbitrary Lagrangian-Eulerian Method [Volume 3, Issue 4, 2010]
  • Seyedein, S. H. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Seyedi, Morteza Chaotic Motion and its Control for a non-Planar non-Linear Cantilever Beam with Parametric Excitation [Volume 1, Issue 1, 2007]
  • Seyedkashi, S. M. H. Experimental Investigation of Effective Parameters on a New Incremental Tube Bulging Method Using Rotary Tool [Volume 10, Issue 2, 2017, Pages 83-91]
  • Seyedkashi, S. M. Hossein A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets [Volume 12, Issue 4, 2019, Pages 47-56]
  • Seyedkashi, S. M. Hossein Analysis of Material Flow and Phase Transformation in Friction Hydro-Pillar Processing of 1045 Steel [Volume 13, Issue 4, 2020, Pages 31-37]
  • Seyedkashi, S. M. Hossein Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]
  • Seyfali, E. Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method [Volume 10, Issue 4, 2017, Pages 85-90]
  • Seyyedbarzani, Seyyed Amin Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Shaban, Mahdi Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer [Volume 14, Issue 1, 2021, Pages 73-81]
  • Shabani, A. Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining [Volume 10, Issue 1, 2017, Pages 101-107]
  • Shabgard, MohamadReza The Choice of Automatic Welding Process and Technology by using WELD-EXP. Software [Volume 1, Issue 1, 2007]
  • Shabgard, Mohammad Reza Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface [Volume 14, Issue 3, 2021, Pages 9-15]
  • Shadkam, A. Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [Volume 10, Issue 4, 2017, Pages 63-73]
  • Shafaghat, Ruzbeh A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]
  • Shafahi, Maryam Evaluation of γ-Al2O3/n-decane Nanofluid Performance in Shell and Tube Heat Recovery Exchanger in a Biomass Heating Plant [Volume 9, Issue 2, 2016, Pages 69-77]
  • Shafiei Nikabadi, Mohsen Design of Cellular Manufacturing using Mathematical Programming: a comparative study with simulation modelling [Volume 6, Issue 2, 2013]
  • Shaghaghi, Gholam Reza Vibration Analysis of an Initially Pre-stressed Rotating Carbon Nanotube Employing Differential Transform Method [Volume 8, Issue 4, 2015]
  • Shah, P. K. Performance Improvement of Solar Stills via Experimental Investigation [Volume 5, Issue 5, 2012]
  • Shahab, Ebrahim Optimal Swing up of Double Inverted Pendulum using Indirect Method [Volume 11, Issue 3, 2018, Pages 101-108]
  • Shahabi, Ali Vehicle’s Dynamic Behavior in Fishhook Maneuver by Considering the Engine Dynamics [Volume 14, Issue 2, 2021, Pages 23-35]
  • Shahabi, Ali Analysis of time–varying mesh stiffness for the planetary gear system with analytical and finite element methods [(Articles in Press)]
  • Shahabi, Ebrahim Kinematic Synthesis of a Novel Parallel Cable Robot as Artificial Leg [Volume 9, Issue 3, 2016, Pages 1-10]
  • Shahabi, Mehdi Optimization of Composite Rotor Blade Using Merged Genetic Algorithm and Finite Element Method [Volume 4, Issue 3, 2011]
  • Shahali, Hessam Study of the Effect of Lubricant Emulsion Percentage and Tool Material on Surface Roughness in Machining of EN AC 48000 Alloy [Volume 3, Issue 3, 2010]
  • ShahAli, Hessam Study on Effective Parameters on Machining Power and Presenting the Predictive Models in Machining of EN-AC 48000 Aluminum Alloy [Volume 1, Issue 3, 2008]
  • Shahbazi Karami, J. Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy [Volume 9, Issue 3, 2016, Pages 11-18]
  • Shahi, Payman Investigation on Microstructure and Production of Coaxial Cable Foam Insulation using Butane Gas [Volume 2, Issue 1, 2008]
  • Shahi, Payman Investigation of Process Parameters, Gate Position and its Shape Effect on Dimensional Accuracy of Injected Plastic Part [Volume 2, Issue 4, 2009]
  • Shahmirzaee Jeshvaghany, Sedigheh Injection into Orbit Optimization using Orthogonal Polynomials [Volume 9, Issue 3, 2016, Pages 65-75]
  • Shahmirzaloo, Ali Determination of Local Constitutive Properties of Aluminum using Digital Image Correlation: A Comparative Study Between Uniform Stress and Virtual Fields [Volume 12, Issue 1, 2019, Pages 67-75]
  • Shahrajabian, H. Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets [Volume 10, Issue 3, 2017, Pages 127-135]
  • Shahrajabian, Hamzeh Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304 [Volume 11, Issue 2, 2018, Pages 121-129]
  • Shahriari, B. Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method [Volume 10, Issue 4, 2017, Pages 85-90]
  • Shahriari, Behrooz Investigating Cooling Effect with Compound Angle on the Combustion Chamber Wall Temperature [Volume 11, Issue 3, 2018, Pages 63-73]
  • Shahriari, Behrooz Effect of Aerodynamic Blade Change of Two-Stage Axial Subsonic Turbine on Design Point [Volume 12, Issue 2, 2019, Pages 63-73]
  • Shahriari, Behrooz Vibration Sensitivity Analysis of Nano-mechanical Piezo-Laminated Beams with Consideration of Size Effects [Volume 13, Issue 4, 2020, Pages 57-68]
  • Shahrooi, Shahram Evaluating the Effects of Overload and Welding Residual Stress in Fatigue Crack Propagation [Volume 12, Issue 1, 2019, Pages 85-93]
  • Shahrooi, Shahram The application of the extended isogeometric analysis (XIGA) with K-refinement approach for the prediction of fatigue life in linear elastic fracture mechanic [(Articles in Press)]
  • Shahverdi, H. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]
  • Shahverdi, H. Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [Volume 8, Issue 1, 2015, Pages 45-54]
  • Shahverdi, Hossein Buckling analysis of cracked columns by XFEM [Volume 9, Issue 1, 2016]
  • Shaik Dawood1, A.K. A New method for Production of Porous Aluminum Castings [Volume 5, Issue 3, 2012]
  • Shakeri, Mohsen Feature Recognition of Sheet Metal Components and Strip Layout Design in Bending Progressive Dies using Fuzzy Set Theory [Volume 2, Issue 3, 2009]
  • Shakeri, Mohsen Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell [Volume 3, Issue 4, 2010]
  • Shalian, Hamid Reza Design and Fabrication of a Composite Energy Absorber [Volume 13, Issue 4, 2020, Pages 1-12]
  • Shalvandi, M. Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [Volume 10, Issue 4, 2017, Pages 75-83]
  • Shamanian, M. Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [Volume 8, Issue 1, 2015, Pages 85-95]
  • Shamanian, Morteza Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4 [Volume 9, Issue 2, 2016, Pages 93-100]
  • Shams, Shahrooz The effect of carbon nanotube waviness and aspect ratio on the buckling of cross-ply laminated FG-CNTRC plates using EFG Method [Volume 9, Issue 1, 2016]
  • Shamsmohammadi, M. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Shamsolhoseinian, Hamidreza Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment [Volume 9, Issue 2, 2016, Pages 79-91]
  • Shamsolhoseinian, H. R. Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Sharafi, Nader Design and Manufacturing Electrochemical Jet Turning Machine and Investigation of its Effective Parameters [Volume 2, Issue 2, 2009]
  • Shariati, M. Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method [Volume 10, Issue 3, 2017, Pages 41-48]
  • Shariati, Mahmoud Bending and vibration analysis of a Mindlin rectangular nanoplate using modified couple stress theory and Navier's solution [(Articles in Press)]
  • Sharifi, E. Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process [Volume 10, Issue 2, 2017, Pages 121-131]
  • Sharifi, Ebrahim Statistical Control of Root Dimensions of Gas Turbine Blade in Creep Feed Grinding Process [Volume 4, Issue 2, 2011]
  • Sharifitabar, Mahmood Microstructure Investigation and Mechanical Properties of Resistance Upset Butt Welded Ti-6Al-4V Alloy [Volume 13, Issue 3, 2020, Pages 91-97]
  • Shariyat, M. Experimental Bending Analysis of Strip Sandwich and Laminated Composite Plates [Volume 7, Issue 4, 2014]
  • Sheikhalishahi, Hamed A New Approach for Determining the Optimum Pressure–Time Diagram in Superplastic Forming Process [Volume 6, Issue 3, 2013]
  • Sheikhbahaei, Erfan Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone [Volume 13, Issue 1, 2020, Pages 51-58]
  • Sheikhi, M. M. Stress distribution in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube [Volume 7, Issue 4, 2014]
  • Sheikhi, Mohammad morad Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment [Volume 9, Issue 2, 2016, Pages 79-91]
  • Sheth, Anant Jitendrakumar Design and performance evaluation of Tuned Vibration Absorber for the vibration control of a centrifugal pump [Volume 7, Issue 1, 2014]
  • Shirani, Amir Hossein Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels [Volume 8, Issue 4, 2015]
  • Shirazizadeh, Mohammad Reza Buckling analysis of cracked columns by XFEM [Volume 9, Issue 1, 2016]
  • Shirbakht, F. Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [Volume 10, Issue 2, 2017, Pages 1-13]
  • Shirian, Hamid Study on the Wettability and Optical Properties of Polydimethylsiloxane-SiO2 Nano-composite Surfaces [Volume 13, Issue 4, 2020, Pages 21-29]
  • Shiriny, Afshin Effect of Injection Velocity on Heat Transfer of Water/Alumina Nano Fluid in A Rectangular Microchannel [Volume 13, Issue 2, 2020, Pages 41-49]
  • Shirneshan, A. Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [Volume 10, Issue 4, 2017, Pages 63-73]
  • Shirneshan, Alireza Investigating the Tribological Behavior of Diesel-biodiesel Blends with Nanoparticle Additives under Short-term Tests [Volume 12, Issue 3, 2019, Pages 19-24]
  • Shishehsaz, Mohammad The application of the extended isogeometric analysis (XIGA) with K-refinement approach for the prediction of fatigue life in linear elastic fracture mechanic [(Articles in Press)]
  • Shoghi, Payman Three Dimensional Free Vibration of FGM Circular Plates Using Semi-Analytical Method [Volume 3, Issue 1, 2009]
  • Shojaeefard, Mohammad Hasan Multi-objective Suspension Optimization of a 5-DOF Vehicle Vibration Model Excited by Random Road Profile [Volume 7, Issue 1, 2014]
  • Shojaeefard, Mohammad Hasan Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel [Volume 7, Issue 2, 2014]
  • Shokrieh, Mahmood Mehrdad Calculation of Elastic Modulus of Reinforced Nanocomposites by Carbon Nanotubes using Finite Element Method, Averaging Approach and Micromechanics Relations [Volume 4, Issue 1, 2010]
  • Shokrieh, Mahmood Mehrdad Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites [Volume 5, Issue 4, 2012]
  • Shokrieh, Mahmoud Mehrdad Optimization of the Manufacturing Process of Natural Fibre Thermoplastic Composites in order to Minimize Warpage [Volume 2, Issue 3, 2009]
  • Shokrieh, Mahmoud Mehrdad Simulation of Mode I Strain Energy Release Rate for Rectangular Laminated Composite Plate Using a Simple Finite Element Model [Volume 3, Issue 4, 2010]
  • Shokuhfar, Ali Effects of Mechanical Alloying on microstructure and microhardness of Nanocrystalline Ni–50at.% Ti Shape Memory Alloy’ [Volume 5, Issue 5, 2012]
  • Siddiquee, Arshad Noor Developments in Conventional Machining of Aluminum Matrix Composite Material: A Review [Volume 7, Issue 3, 2014]
  • Sinclair, Anthony N Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Singu, Sai Praneeth Design and Optimization of Metal Matrix Composite (MMC’S) Spur Gear [Volume 9, Issue 3, 2016, Pages 49-56]
  • Siva Prasad, Kondapalli Investigation of Stresses in U-Shaped Metal Bellow Using EJMA Standards [Volume 10, Issue 2, 2017, Pages 25-35]
  • Sobamowo, M. Gbeminiyi Picard Iteration Method to Kinetic Analysis of Thermal Inactivation of Enzyme as Applied in Biotechnology [Volume 11, Issue 4, 2018, Pages 53-59]
  • Soheili, Farshid Design and Implementation of Embedded Direct Drive SCARA Robot Controller with Resolved Motion Rate Control Method [Volume 13, Issue 3, 2020, Pages 83-90]
  • Soheili, M Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Sohrabi, Amir Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [Volume 8, Issue 4, 2015]
  • Sohrabi, Sobhan Trajectory Path Planning of Cable Driven Parallel Manipulators, Considering Masses and Flexibility of the Cables [Volume 9, Issue 3, 2016, Pages 57-64]
  • Soleimani, Ahmad Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires [Volume 11, Issue 3, 2018, Pages 45-53]
  • Soleimani Dashtaki, Arezoo The Effect of Type and Location of a Phase Change Material (PCM) Layer in a Building Wall on Energy Consumption using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 33-46]
  • Soleimany, Hossain Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding [Volume 13, Issue 4, 2020, Pages 109-120]
  • Soleimanzadeh, M. Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation [Volume 11, Issue 1, 2018, Pages 43-50]
  • Solhjoei, Nosratollah Prediction of Rupture Using Ductile and MSFLD Damage in T- Shape Tube Hydro-Forming Process [Volume 5, Issue 3, 2012]
  • Solhjoei, Nosratollah Nonlinear bending analysis of thick functionally graded plates based on third-order shear deformation plate theory [Volume 7, Issue 2, 2014]
  • Solhjoei, Nosratollah Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding [Volume 9, Issue 3, 2016, Pages 41-47]
  • Soltani, Behzad The effect of carbon nanotube waviness and aspect ratio on the buckling of cross-ply laminated FG-CNTRC plates using EFG Method [Volume 9, Issue 1, 2016]
  • Soltani, Esmaeil Study on Effective Parameters on Machining Power and Presenting the Predictive Models in Machining of EN-AC 48000 Aluminum Alloy [Volume 1, Issue 3, 2008]
  • Soltani, Esmaeil Study of the Effect of Lubricant Emulsion Percentage and Tool Material on Surface Roughness in Machining of EN AC 48000 Alloy [Volume 3, Issue 3, 2010]
  • Soltani, M. Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [Volume 8, Issue 1, 2015, Pages 85-95]
  • Sotoodehnia, Shima Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [Volume 11, Issue 3, 2018, Pages 25-34]
  • Soury, E. Flow Study of Wood Plastic Composite Through a Circular Die in an Extrusion Process [Volume 10, Issue 2, 2017, Pages 37-47]
  • Subramanian, Karthikeyan Design Enhancement of EGR System for Improved Vibration Performance on Truck Diesel Engine [Volume 7, Issue 1, 2014]

T

  • Tabasi, Abbas Influence of Element Order in Various Aspect of Evolutionary Structural Optimization [Volume 3, Issue 2, 2010]
  • Tabatabaee Ghomi, M. Non Destructive Evaluation of Glass-Epoxy Composite using Impact-echo Method [Volume 10, Issue 1, 2017, Pages 85-91]
  • Tabatabaee Ghomi, M. Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [Volume 11, Issue 1, 2018, Pages 71-78]
  • Tabatabaei, S.Hamed A Novel Approach for Optimization of Vehicle Noise Insulators [Volume 13, Issue 3, 2020, Pages 9-20]
  • Tabatabaei Oreh, S. Hamed Optimal control with adaptive weighting coefficients for integrated vehicle dynamics control [Volume 7, Issue 1, 2014]
  • Tadi Beni, Yaghoub Investigation of CNT Defects on Mechanical Behavior of Cross linked Epoxy based Nanocomposites by Molecular Dynamics [Volume 9, Issue 1, 2016]
  • Tadi Beni, Yaghoub Ultrasonic Assisted Equal Channel Angular ‎Extrusion Process ‎‎(UAECAE)‎ [Volume 10, Issue 1, 2017, Pages 13-22]
  • Taeibi-Rahni, M. Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Tafazoli Harandi, Mohammad Study of Composite Pressure Vessel CNG with Nonmetal Liner Under Low Velocity Impact [Volume 1, Issue 3, 2008]
  • Taghizade, Mitra Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments [Volume 12, Issue 1, 2019, Pages 23-29]
  • Taheri, Hossein The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Taheri, Mehdi Assessment of Foolad Mobarakeh ST14 Low Carbon Steel Sheet for Automobile Frames [Volume 1, Issue 1, 2007]
  • Taheri, Morteza Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy [Volume 11, Issue 4, 2018, Pages 13-22]
  • Taheri, Morteza Comparative Study of LS-SVM, RVM and ELM for Modelling of Electro-Discharge Coating Process [Volume 14, Issue 1, 2021, Pages 19-32]
  • Taherifar, Davood Optimization of Composite Rotor Blade Using Merged Genetic Algorithm and Finite Element Method [Volume 4, Issue 3, 2011]
  • Taherkhorsandi, Milad Optimal Robust Design of Sliding-mode Control Based on Multi-Objective Particle Swarm Optimization for Chaotic Uncertain Problems [Volume 10, Issue 3, 2017, Pages 115-126]
  • Tahmasebipour, M. Effect of AFM Cantilever Geometry on the DPL Nanomachining Process [Volume 9, Issue 4, 2016, Pages 75-80]
  • Tahmasebipour, Mohammad Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining [Volume 10, Issue 1, 2017, Pages 101-107]
  • Tahmasebipour, Mohammad Micro Wire Electrical Discharge Machining of MEMS Structures with Optimized Dimensional Deviation [Volume 12, Issue 2, 2019, Pages 103-109]
  • Tahmasebipour, Y. Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining [Volume 10, Issue 1, 2017, Pages 101-107]
  • Tahmasebipour, Younes Micro Wire Electrical Discharge Machining of MEMS Structures with Optimized Dimensional Deviation [Volume 12, Issue 2, 2019, Pages 103-109]
  • Tajdari, Mehdi Study and Analysis of Al2O3-SiC Nanocomposite Ceramics’ Fracture Toughness using Vickers Indenter [Volume 4, Issue 3, 2011]
  • Tajdari, Mehdi Microstructure and Mechanical Properties of Al2O3-SiC Nanocomposites with 0.05% MgO and Different SiC Volume Fraction [Volume 5, Issue 3, 2012]
  • Tajik, A. Design and Manufacturing the Torque Gauge of ICaSbot and Implementing its Data Transfer Protocol [Volume 6, Issue 2, 2013]
  • Talebi, Farhad Analysis and Optimization of Reducing Steady State Time for Heating Systems [Volume 2, Issue 2, 2009]
  • Talebi, Mansour Simulation of Laminar and Turbulent Flow around Tube Bundles and Effect of Rynolds Number [Volume 3, Issue 1, 2009]
  • Talebi, Mansour Thermal-hydraulic Analysis of Helical Coil Steam Generator of The Multi-Application Small Light Water Reactor (MASLWR) Test Loop Using Drift Flux Model [Volume 11, Issue 3, 2018, Pages 83-91]
  • Talebi, Shahram Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM [Volume 5, Issue 2, 2012]
  • Tarighi, Reza Velocity Control of Nonlinear Unmanned Rotorcraft using Polytopic Modelling and State Feedback Control [Volume 13, Issue 3, 2020, Pages 33-49]
  • Tarighi, Reza Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping [Volume 14, Issue 2, 2021, Pages 111-122]
  • Tavakkoli, V. Microstructure and Mechanical Properties of AZ91 Magnesium Cup Processed by a Combined Backward Extrusion and Constrained Ironing Method [Volume 10, Issue 1, 2017, Pages 23-30]
  • Tavakoli, V. Severe Plastic Deformation of Nanostructured Cu-30%Zn Tubes at Increased Temperatures [Volume 9, Issue 3, 2016, Pages 85-91]
  • Teimouri, Farhad Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks [Volume 12, Issue 2, 2019, Pages 119-132]
  • Toghraie, Davood Thermomechanical Properties of the Polymeric Nanocomposite Predicted by Molecular Dynamics [Volume 12, Issue 4, 2019, Pages 25-32]
  • Torabi, M. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Torabi, Seyyed Amin Investigating the Effect of Manganese Content on the Properties of High Manganese Austenitic Steels [Volume 10, Issue 1, 2017, Pages 75-83]
  • Tourajizadeh, H. Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]
  • Tourajizadeh, H. Design and Manufacturing the Torque Gauge of ICaSbot and Implementing its Data Transfer Protocol [Volume 6, Issue 2, 2013]
  • Tourajizadeh, Hami Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [Volume 8, Issue 3, 2015]
  • Tourajizadeh, Hami Longitudinal and Lateral Vibration Analysis of Cables in a Cable Robot Using Finite Element Method [Volume 10, Issue 1, 2017, Pages 1-11]
  • Tourajizadeh, Hami Design, Modeling and Adaptive Force Control of a New Mobile Manipulator with Backlash Disturbances [Volume 12, Issue 2, 2019, Pages 1-16]
  • Tourajizadeh, Hami A New Optimal Method for Calculating the Null Space of a Robot using NOC Algorithm; Application on Parallel 3PRS Robot [Volume 13, Issue 1, 2020, Pages 1-15]
  • Tourajizadeh, Hami Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm [Volume 14, Issue 1, 2021, Pages 1-17]
  • Tourajizadeh, Hami Modelling and Control of Mutation Dynamics of the Cancer Cells Employing Chemotherapy [(Articles in Press)]
  • Towsyfyan, Hossein Application of Imperialist Competitive Algorithm to optimization problems arising in welding process [Volume 7, Issue 3, 2014]
  • Tunuguntla, Rohith Sai Design and Optimization of Metal Matrix Composite (MMC’S) Spur Gear [Volume 9, Issue 3, 2016, Pages 49-56]

U

  • U., Chandrasekhar Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography [Volume 9, Issue 3, 2016, Pages 103-113]

V

  • Vaezinejad, Mohamad Shock Suspension System Review and Analysis of Airplane During Landing [Volume 1, Issue 4, 2008]
  • Vafaeenezhad, H. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [Volume 8, Issue 2, 2015, Pages 29-36]
  • Vafaeesefat, Abbas Numerical and experimental study of parameters affecting metal forming using rubber pads, on parts with radius of curvature [Volume 6, Issue 1, 2013]
  • Vafaee Sefat, Abbas Study and Analysis of Al2O3-SiC Nanocomposite Ceramics’ Fracture Toughness using Vickers Indenter [Volume 4, Issue 3, 2011]
  • Vafaeisefat, Abbas Study of Composite Pressure Vessel CNG with Nonmetal Liner Under Low Velocity Impact [Volume 1, Issue 3, 2008]
  • Vafaeisefat, Abbas Investigation of Machining Parameters in Wire Electrical Discharge Machining (WEDM) on the Surface Roughness & Cutting Speed of Tungsten Carbide [Volume 2, Issue 2, 2009]
  • Vafaie, Ali Micro Wire Electrical Discharge Machining of MEMS Structures with Optimized Dimensional Deviation [Volume 12, Issue 2, 2019, Pages 103-109]
  • Vahabi, Hamed Buckling Analysis of Orthotropic Annular Graphene Sheet with Various Boundary Conditions in an Elastic Medium [Volume 13, Issue 2, 2020, Pages 73-90]
  • Vahabi, Meisam Design of a Dynamically Balanced 2-DOF Planar Parallel Manipulator using Four-bar Legs [Volume 10, Issue 3, 2017, Pages 81-86]
  • Vahabi, Meisam Optimal Design of a Novel Two-Branch Spray Painting Robot for Prescribed Process Space [Volume 12, Issue 1, 2019, Pages 13-21]
  • Vahdati, A.R. Presenting a New Method for High Speed Incremental Forming [Volume 5, Issue 2, 2012]
  • Vahdati, M. Presenting a New Method for High Speed Incremental Forming [Volume 5, Issue 2, 2012]
  • Vahdati, M. Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology [Volume 8, Issue 1, 2015, Pages 13-23]
  • Vahdati, Mehrdad Mold Less Casting, a New Method for Droplet Based Part Manufacturing [Volume 2, Issue 1, 2008]
  • Vahdati, Mehrdad Measuring Vibration in the Air Slide Tables of Ultra Precision Machines With the Different Number of Air Pockets [Volume 3, Issue 1, 2009]
  • Vahdati, Mehrdad Simulation of Air Gap Thickness on Air Spindle Vibrations in Ultra Precision Machine Tools [Volume 6, Issue 2, 2013]
  • Vahdati, Mehrdad Simulation of Air Pad Shape on Pressure Distribution in Air Gap of Air Table in Ultra Precision Machine Tools [Volume 7, Issue 1, 2014]
  • Vahdati, Mehrdad Evaluation of Parameters Affecting Magnetic Abrasive Finishing (MAF) of Superalloy Inconel 718 [Volume 10, Issue 3, 2017, Pages 1-10]
  • Vahedi, Khodadad Investigation and Analysis of CNG Tank Mass Effects On Main Components of Vehicle Performance [Volume 1, Issue 4, 2008]
  • Vahedi, Khodadad Parametric Analysis of Square Thin Walled Section in Energy Absorption due to Oblique Load [Volume 3, Issue 3, 2010]
  • Vahedi, Khodadad A Novel Study of Penetration ‎into Concrete Targets by Ogive ‎Nose Projectiles [Volume 6, Issue 3, 2013]
  • Vahidi, Mohsen Experimental Investigation of Turbulence Promoters effect on Characteristics of Wake related to Linear Compressor Cascade [Volume 7, Issue 2, 2014]
  • Vakili, M. Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers [Volume 11, Issue 1, 2018, Pages 51-59]
  • Vakili Sohrforozani, Ali Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process [Volume 13, Issue 3, 2020, Pages 75-82]
  • Valeru, Suresh Babu Failure and Stress Analysis of Glass Fiber Reinforced Laminated Composite Pinned Joints [Volume 6, Issue 2, 2013]
  • Varedi-Koulaei, Seyyed Mojtaba The Effects of Joint Clearance on the Dynamics of the 3-RPR Planar Parallel Manipulator [Volume 11, Issue 2, 2018, Pages 120-113]
  • Varedi-Koulaei, Seyyed Mojtaba Direct Kinematics Solution of 3-RCC Parallel Robot using a Semi-Analytical Homotopy Method [Volume 12, Issue 1, 2019, Pages 1-12]
  • Vasei Moghadam, Amir Experimental Investigation of Pool Boiling of Single Wall Carbon Nanotubes (SWCNTs) with Different Grooved Surfaces [Volume 12, Issue 3, 2019, Pages 77-84]
  • Vinay Kumar, Kanukati EVALUATION OF FATIGUE LIFE OF FRICTION STIR WELDED 7075-T651 ALUMINUM ALLOY JOINTS [Volume 6, Issue 1, 2013]
  • Viral Patel, Abhishek Patel Effect of Processing Parameters on Properties of Friction Stir Welded Joints of Aluminium Alloys AA7075- T651 and AA6061-T6 [Volume 10, Issue 2, 2017, Pages 93-99]
  • V.V.S, KESAVA RAO Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels [Volume 13, Issue 2, 2020, Pages 51-64]

X

  • Xu, Y.J. Minimizing Thermal Residual Stresses in Ceramic Matrix Composite by BSG-Starcraft Radius PSO [Volume 7, Issue 2, 2014]

Y

  • Yaghoubi, Saeed A Comprehensive Study on the Effects of the Boundary Conditions on the Elastic Buckling Capacity of a Perforated Plate [Volume 14, Issue 3, 2021, Pages 45-53]
  • Yavari Nouri, Masoud Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process [Volume 14, Issue 3, 2021, Pages 1-7]
  • Yazdani, Azadi Design and Development of Limits of Stability and Postural Stability Protocols for a Computerized Dynamic Posturography [Volume 7, Issue 2, 2014]
  • Yazdani, Saleh Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]
  • Yousefi, Fatemeh Analysis and Optimization of Reducing Steady State Time for Heating Systems [Volume 2, Issue 2, 2009]
  • Yousefzadeh, Mahdi Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [Volume 8, Issue 3, 2015]
  • Yousefzadeh, Mahdi Longitudinal and Lateral Vibration Analysis of Cables in a Cable Robot Using Finite Element Method [Volume 10, Issue 1, 2017, Pages 1-11]
  • Yousufuddin, Syed EVALUATION OF FATIGUE LIFE OF FRICTION STIR WELDED 7075-T651 ALUMINUM ALLOY JOINTS [Volume 6, Issue 1, 2013]

Z

  • Zaare, Hadi Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach [Volume 11, Issue 2, 2018, Pages 103-111]
  • Zadshakoyan, Mohammad Vibration based Assessment of Tool Wear in Hard Turning using Wavelet Packet Transform and Neural Networks [Volume 12, Issue 2, 2019, Pages 17-26]
  • Zadshakoyan, Mohammad Design of an Intelligent Adaptive Control with Optimization System to Produce Parts with Uniform Surface Roughness in Finish Hard Turning [Volume 13, Issue 2, 2020, Pages 1-12]
  • Zakeri, V. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [Volume 8, Issue 1, 2015, Pages 77-83]
  • Zakeri Mehrabad, V. Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method [Volume 9, Issue 3, 2016, Pages 19-29]
  • Zakeri Mehrabad, Vahid Tool Wear Modeling in Drilling Process of AISI1020 and AISI8620 Using Genetic Programming [Volume 10, Issue 1, 2017, Pages 93-100]
  • Zamani, Mohammad Reza Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Zamani, Pedram Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate [Volume 11, Issue 4, 2018, Pages 47-52]
  • Zamani Gharaghoushi, Ali Effect of Aerodynamic Blade Change of Two-Stage Axial Subsonic Turbine on Design Point [Volume 12, Issue 2, 2019, Pages 63-73]
  • Zanousi, Sina A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery [Volume 7, Issue 3, 2014]
  • Zarareh, A. Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [Volume 8, Issue 2, 2015, Pages 47-54]
  • Zareh, Masoud Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber [Volume 14, Issue 2, 2021, Pages 73-83]
  • Zarepour, Hamid Study on Effective Parameters on Machining Power and Presenting the Predictive Models in Machining of EN-AC 48000 Aluminum Alloy [Volume 1, Issue 3, 2008]
  • Zarepour, Hamid Prediction of Material Removal Rate in Ductile–mode Micro Ultrasonic Machining [(Articles in Press)]
  • Zarepour Firouzabadi, Hamid Precision Force Measurement and Control in Micro Ultrasonic Machining [Volume 10, Issue 3, 2017, Pages 11-17]
  • Zarepour Firouzabadi, Hamid The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets [Volume 11, Issue 4, 2018, Pages 23-29]
  • Zaretabar, Mohsen Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure [Volume 14, Issue 3, 2021, Pages 85-89]
  • Zarghami, Ahad Finite Volume-Lattice Boltzmann Modeling of Viscous Flows [Volume 4, Issue 2, 2011]
  • Zarghami, Ahad Study of Skin Friction in Channels by Lattice Boltzmann Method [Volume 6, Issue 3, 2013]
  • Zarnegar, Soodeh Pareto Optimum Design of Heat Exchangers based on the Imperialist Competitive Algorithm: A Case Study [Volume 11, Issue 3, 2018, Pages 75-82]
  • Zarrintala, H. Impact of Energy Dampers in Improvement of Impulsive Response of Double Layer Grids Space Structures [Volume 10, Issue 4, 2017, Pages 27-35]
  • Zio, Enrico Joint Optimization of Spare Parts Strategy and Maintenance Policies for Manufacturing Systems [Volume 13, Issue 4, 2020, Pages 69-77]
  • Ziyaee Rad, Saeed Vehicle Interior Structure Borne Noise Calculation Using Finite Element Method [Volume 2, Issue 4, 2009]
  • Zohoor, M. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]
  • Zohoor, Mehdi Obtain the Optimum Parameters for Cutting Hard and Tough Material (Hardox Steel) by Abrasive Water Jet Cutting Process [Volume 5, Issue 5, 2012]
  • Zohoor, Mehdi Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods [Volume 11, Issue 4, 2018, Pages 99-106]
  • Zohour, Mehdi Design of Full Metal CNG Cylinders for Vehicle [Volume 1, Issue 2, 2008]
  • Zolfaghari, Abbas Flow Balance of an Extrusion Die for Production of a U-Shaped Profile [Volume 2, Issue 4, 2009]
  • Zolghadr, Hadi Optimization of suspension system of sport car in three dimensional reactions space [Volume 7, Issue 3, 2014]
  • Zomorodian, Amir Assessment of Foolad Mobarakeh ST14 Low Carbon Steel Sheet for Automobile Frames [Volume 1, Issue 1, 2007]
  • Zubair Nizami, Mohd EVALUATION OF FATIGUE LIFE OF FRICTION STIR WELDED 7075-T651 ALUMINUM ALLOY JOINTS [Volume 6, Issue 1, 2013]