Author Index

A

  • Ahmadi, Ehsan Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Ahmadian, Mohammad Taghi Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Akbari Roknabadi, Saeed Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites [Volume 5, Issue 4, 2012]
  • Alafzadeh, Mina Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM [Volume 5, Issue 2, 2012]
  • Aliabbasi, Reza Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Amirimighadam, A. Proportional-derivative Fuzzy Control of Conjugated Polymer Actuators [Volume 5, Issue 2, 2012]
  • Amirshekari, Mojtaba Investigation of Oxygen Enriched air intake on diesel engine exhaust emissions [Volume 5, Issue 3, 2012]
  • Arab, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Ardakani, Mohsen Dashti Using the Bees Algorithm with the Boundary Elements Method to Solve the Inverse Problem of Transient Heat Conduction [Volume 5, Issue 2, 2012]
  • Asadzadeh, Mahmoud Bending Properties of Date Palm Fiber and Jute Fiber Reinforced Polymeric Composite [Volume 5, Issue 4, 2012]

B

  • Bahrami, Alireza The effect of orientation on optimum insulation position in the wall of a building with natural ventilation in hot and dry climate [Volume 5, Issue 3, 2012]
  • Banitalebi, Hooman A New Approach for Non Contact Measuring of Tension in Fixed and Moving Wires [Volume 5, Issue 4, 2012]
  • Borhani, M. Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum [Volume 5, Issue 2, 2012]
  • Bozorgan, Nariman Evaluation of the Heat and Mass Transfer and Exergy in the Counter Flow Wet Cooling Tower of Khuzestan Steel Company (KSC) [Volume 5, Issue 3, 2012]
  • Bozorgan, Navid Evaluation of the using Al2O3/EG and TiO2/EG nanofluids as coolants in the double-tube heat exchanger [Volume 5, Issue 2, 2012]
  • Bozorgan, Navid Evaluation of the Heat and Mass Transfer and Exergy in the Counter Flow Wet Cooling Tower of Khuzestan Steel Company (KSC) [Volume 5, Issue 3, 2012]

D

  • Daneshmand, S. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Davar, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Djavanroodi, Faramarz Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]

E

  • Esfandiar, H. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Eslami-Farsani, Reza The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]

F

  • FARROKHI, MOHAMMAD Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem [Volume 5, Issue 2, 2012]

G

  • Ghadimi, Morteza Effects of Mechanical Alloying on microstructure and microhardness of Nanocrystalline Ni–50at.% Ti Shape Memory Alloy’ [Volume 5, Issue 5, 2012]
  • Ghajar, Rahmatollah Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Ghorbani, Mohammad Taghi A semi-analytical solution for time-variant thermoelastic creep analysis of functionally graded rotating disks with variable thickness and properties. [Volume 5, Issue 2, 2012]
  • Guang Li, Wen Impeller trimming of an Industrial Centrifugal Viscous Oil Pump [Volume 5, Issue 1, 2011]

H

  • Habibnejad korayem, Moharam Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]
  • Hasanian, M. Gas Pipeline Corrosion Mapping Using Pulsed Eddy Current Technique [Volume 5, Issue 1, 2011]
  • Heydari, A. Buckling of Functionally Graded Beams with Rectangular and Annular Sections Subjected to Axial Compression [Volume 5, Issue 1, 2011]
  • Homami, Rasool Mokhtari Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Honarvar, Farhang Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Hosseini, Mir Amin Kinematic Analysis of a Novel 3-CRS/PU Parallel Manipulator [Volume 5, Issue 5, 2012]

J

  • Jafari, AliAsghar Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates [Volume 5, Issue 5, 2012]
  • Jafari Nedoushan, Reza Effect of Mandrel, Its Clearance and Pressure Die on Tube Bending Process via Rotary Draw Bending Method [Volume 5, Issue 5, 2012]
  • Jalali, M. Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]
  • Jalili, Mohamad Mahdi Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Janbakhsh, Milad Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]
  • Jandaghian, AliAkbar Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates [Volume 5, Issue 5, 2012]
  • Javaherdeh, K. Exergy Analysis of a Trigeneration System Driven by Aninternal Combustion Engine with Asteam Ejector Refrigeration System [Volume 5, Issue 3, 2012]
  • Javam, N. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Javanroodi, F. Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum [Volume 5, Issue 2, 2012]

K

  • Karimian, S.M.H. Two Dimensional Simulation of Laminar Flow Around Two Bodies in Relative Motion [Volume 5, Issue 3, 2012]
  • Keshavarz, Arash Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Keshtkar, MohamadMehdi Numerical Investigation on Thermal Performance of a Composite Porous Radiant Burner under the Influence of a 2-D Radiation Field [Volume 5, Issue 1, 2011]
  • Khalili, Seyyed Mohammad Reza The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]
  • Khayat, M. Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Krishna, M.V.S. Murali Potential of a Low Heat Rejection Diesel Engine with Renewable Fuels [Volume 5, Issue 3, 2012]

L

  • Liravinia, B. Exergy Analysis of a Trigeneration System Driven by Aninternal Combustion Engine with Asteam Ejector Refrigeration System [Volume 5, Issue 3, 2012]

M

  • Maarefdoust, M. Proportional-derivative Fuzzy Control of Conjugated Polymer Actuators [Volume 5, Issue 2, 2012]
  • Mahdavi, F. Two Dimensional Simulation of Laminar Flow Around Two Bodies in Relative Motion [Volume 5, Issue 3, 2012]
  • Mahmoodi, Masoud Experimental and Numerical Study of Through Thickness Residual Stresses Distribution in Sheet Metals Produced by ECAR [Volume 5, Issue 4, 2012]
  • Mehdipoor, Ali Impact Behavior of Ceramic-Metal Armour by Al2O3-Nano SiC Nano Composite [Volume 5, Issue 5, 2012]
  • Mirone, Giuseppe Triaxiality factor and Lode angle effects on failure of a steel considering plastic anisotropy [Volume 5, Issue 4, 2012]
  • Mirzaei, Jaber Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]
  • MizanAdl, Seyd Mohammad Mehdi Using the Bees Algorithm with the Boundary Elements Method to Solve the Inverse Problem of Transient Heat Conduction [Volume 5, Issue 2, 2012]
  • MOHAMMAD Hoseni, SAEED Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem [Volume 5, Issue 2, 2012]
  • Mondali, M. Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading [Volume 5, Issue 1, 2011]
  • Moradkhani, Ali Reza Microstructure and Mechanical Properties of Al2O3-SiC Nanocomposites with 0.05% MgO and Different SiC Volume Fraction [Volume 5, Issue 3, 2012]
  • Mortezaei, Hosein Investigation of rail track vibration due to fractured sleepers [Volume 5, Issue 4, 2012]
  • Mousavi, S. M. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]

N

  • Najafi, Moslem The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites [Volume 5, Issue 4, 2012]
  • Namjoo, Moslem Stress Analysis of Tractor Tire Interaction whit Soft Soil using Non-linear 2D Finite Element Method [Volume 5, Issue 3, 2012]
  • Nankali, Naser Stress Analysis of Tractor Tire Interaction whit Soft Soil using Non-linear 2D Finite Element Method [Volume 5, Issue 3, 2012]
  • Nasiri, S. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]

P

  • Panchal, Hitesh N Performance Improvement of Solar Stills via Experimental Investigation [Volume 5, Issue 5, 2012]
  • Patil, H. S. An Experimental Study on Full Toroidal Continuously Variable Transmission System [Volume 5, Issue 1, 2011]

R

  • Rafeeyan, Mansour A New Approach for Non Contact Measuring of Tension in Fixed and Moving Wires [Volume 5, Issue 4, 2012]
  • Rahimi, GH Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]
  • Rahmati, Sadegh Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened Austenitic-ferritic (Duplex) stainless steel [Volume 5, Issue 2, 2012]
  • Rajabirad, M. J. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Riahi, Mohammad Anisotropy Induced Biaxial Stress-Strain Relationships in Aluminum Alloys [Volume 5, Issue 3, 2012]

S

  • Safizadeh, M. S. Gas Pipeline Corrosion Mapping Using Pulsed Eddy Current Technique [Volume 5, Issue 1, 2011]
  • Salehi, Farzaneh Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Sedighi, Mohammad Experimental and Numerical Study of Through Thickness Residual Stresses Distribution in Sheet Metals Produced by ECAR [Volume 5, Issue 4, 2012]
  • Shah, P. K. Performance Improvement of Solar Stills via Experimental Investigation [Volume 5, Issue 5, 2012]
  • Shahverdi, H. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]
  • Shaik Dawood1, A.K. A New method for Production of Porous Aluminum Castings [Volume 5, Issue 3, 2012]
  • Shamsmohammadi, M. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Shokrieh, Mahmood Mehrdad Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites [Volume 5, Issue 4, 2012]
  • Shokuhfar, Ali Effects of Mechanical Alloying on microstructure and microhardness of Nanocrystalline Ni–50at.% Ti Shape Memory Alloy’ [Volume 5, Issue 5, 2012]
  • Sinclair, Anthony N Monitoring of Pipe-Wall Thickness and Thinning Rate by Ultrasonic Technique [Volume 5, Issue 4, 2012]
  • Soheili, M Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Solhjoei, Nosratollah Prediction of Rupture Using Ductile and MSFLD Damage in T- Shape Tube Hydro-Forming Process [Volume 5, Issue 3, 2012]

T

  • Taeibi-Rahni, M. Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall [Volume 5, Issue 5, 2012]
  • Tajdari, Mehdi Microstructure and Mechanical Properties of Al2O3-SiC Nanocomposites with 0.05% MgO and Different SiC Volume Fraction [Volume 5, Issue 3, 2012]
  • Talebi, Shahram Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM [Volume 5, Issue 2, 2012]
  • Torabi, M. Design of a New Anti-Lock Braking System for Motorcycles [Volume 5, Issue 1, 2011]
  • Tourajizadeh, H. Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach [Volume 5, Issue 3, 2012]

V

  • Vahdati, A.R. Presenting a New Method for High Speed Incremental Forming [Volume 5, Issue 2, 2012]
  • Vahdati, M. Presenting a New Method for High Speed Incremental Forming [Volume 5, Issue 2, 2012]

Y

  • Yazdani, Saleh Experimental Versus Numerical Investigation into the Effects of Hoop Welding in Metallic Pressure Vessels with Spherical Caps [Volume 5, Issue 4, 2012]

Z

  • Zohoor, M. Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods [Volume 5, Issue 1, 2011]
  • Zohoor, Mehdi Obtain the Optimum Parameters for Cutting Hard and Tough Material (Hardox Steel) by Abrasive Water Jet Cutting Process [Volume 5, Issue 5, 2012]